Owner's Manual
Table Of Contents
- Owner's Manual
- Contents
- Before Using the Unit
- Features
- Preparations
- Connecting speakers
- Connecting a TV
- Connecting playback devices
- Connecting the radio antennas
- Preparing for connecting to a network
- Connecting other devices
- Plugging in the power cable
- Selecting the on-screen menu language
- Configuring the necessary speaker settings
- Setting MusicCast
- Enjoying Sound
- Enjoying sound field effects
- Select your favorite sound mode
- Enjoying 3D sound fields (CINEMA DSP 3D)
- Enjoying sound field effects optimized for the type of content
- Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)
- Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)
- Enjoying surround sound with headphones (SILENT CINEMA)
- Enjoying unprocessed playback
- Enjoying enhanced bass sound
- Enjoying enhanced compressed music
- Enjoying Dolby Atmos® and DTS:X™
- Enjoying music in multiple rooms
- Enjoying sound field effects
- Playback
- Basic playback procedure
- Listening to FM/AM radio (Except for U.K., Europe, Russia and Australia models)
- Listening to DAB radio (U.K., Europe, Russia and Australia models)
- Preparing the DAB tuning
- Selecting a DAB radio station for reception
- Selecting a preset DAB radio station
- Registering a DAB radio station as presets
- Clearing preset DAB radio stations
- Clearing all preset DAB radio stations
- Displaying the DAB information
- Checking reception strength of each DAB channel label
- Listening to FM radio (U.K., Europe, Russia and Australia models)
- Playing back music stored on a Bluetooth® device
- Playing back music with AirPlay
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Listening to music streaming services
- Useful playback functions
- Configuring playback settings for different playback sources (Option menu)
- Basic operation of the Option menu
- Option menu items
- Adjusting the tone of the audio output
- Configuring the volume automatically based on the YPAO measurement results
- Adjusting the volume or perceive height of dialogue sounds
- Adjusting the delay of the Lipsync function
- Setting Compressed Music Enhancer
- Correcting volume differences during playback
- Setting the use of Extra Bass
- Enabling the video signal processing
- Selecting a video source to be output with the selected audio source
- Configuring the shuffle/repeat setting
- Switching between stereo and monaural for FM radio reception
- Setting presets for radio stations
- Adding an Internet radio station to the “Favorites” folder
- Removing an Internet radio station from the “Favorites” folder
- Performing an initial scan for DAB radio reception
- Checking reception strength of each DAB channel label
- Checking the current status information
- Configurations
- Configuring various functions (Setup menu)
- Configuring the speaker settings
- Setting your speaker system
- Setting the size of the front speakers
- Setting the use of a center speaker and its size
- Setting the use of surround speakers and their size
- Setting the layout of the surround speakers
- Setting the use of surround back speakers and their size
- Setting the use of presence speakers and their size
- Setting the layout of the presence speakers
- Setting the crossover frequency of the low-frequency components
- Setting the use of a subwoofer
- Setting the phase of the subwoofer
- Setting the distance between each speaker and the listening position
- Adjusting the volume of each speaker
- Setting the equalizer
- Outputting test tones
- Reloading the previous YPAO adjustments
- Configuring the sound settings
- Checking the current audio signal information
- Enabling Lipsync adjustment
- Setting the adjustment method of the Lipsync function
- Adjusting the delay of the Lipsync function
- Selecting sound programs
- Adjusting the sound field effect level
- Adjusting the delay between the direct sound and presence sound field generation
- Adjusting the broadening effect of the presence sound field
- Adjusting the loss of the presence sound field
- Adjusting the decay time of the rear reverberant sound
- Adjusting the delay between the direct sound and reverberant sound generation
- Adjusting the volume of the reverberant sound
- Adjusting the delay between the direct sound and surround sound field generation
- Adjusting the broadening effect of the surround sound field
- Adjusting the loss of the surround sound field
- Adjusting the delay between the direct sound and surround back sound field generation
- Adjusting the broadening effect of the surround back sound field
- Adjusting the loss of the surround back sound field
- Selecting the surround decoder used in the program
- Setting the use of Center Spread
- Adjusting the center localization (broadening effect) of the front sound field
- Adjusting the entire volume for “7ch Stereo”
- Adjusting the front and rear volume balance for “7ch Stereo”
- Adjusting the left and right volume balance for “7ch Stereo”
- Adjusting the height volume balance using the presence speakers for “7ch Stereo”
- Setting the use of Monaural Mix for “7ch Stereo”
- Setting the dynamic range adjustment method
- Setting the limit value of the volume
- Setting the initial volume for when the unit is turned on
- Adjusting the CINEMA DSP 3D effect level automatically
- Setting Virtual Surround Back Speaker (VSBS)
- Configuring the scene settings
- Configuring the video/HDMI settings
- Checking the current video and HDMI signal information
- Setting the use of the video signal processing
- Setting a resolution to output HDMI video signals
- Setting an aspect ratio to output HDMI video signals
- Setting the use of HDMI Control
- Setting the audio jack used for TV audio input
- Setting the use of ARC
- Linking the standby modes of the unit and the TV
- Setting the output of HDMI audio from the TV speaker
- Setting the version of HDCP used on the HDMI input jacks
- Setting the use of HDMI Standby Through
- Configuring the network settings
- Checking the network information on the unit
- Setting the network connection method (Wired/Wireless)
- Setting the network parameters automatically (DHCP)
- Setting the network parameters manually
- Setting the use of the Network Standby function
- Setting the MAC address filter
- Setting the MAC address
- Setting the use of a Digital Media Controller
- Setting the use of volume control via AirPlay
- Setting the network name of the unit
- Setting the power interlock from the unit to MusicCast compatible devices
- Configuring the Bluetooth® settings
- Configuring the multi zone settings
- Checking the Zone2 information
- Setting the use of volume adjustments for Zone2 output
- Setting the Zone2 limit value of the volume
- Setting the Zone2 initial volume for when the unit is turned on
- Adjusting the time deviation in relation to the main zone
- Switching between stereo and monaural for Zone2 output
- Setting the use of Compressed Music Enhancer for Zone2 output
- Adjusting the tone for Zone2 output
- Setting the use of Extra Bass for Zone2 output
- Adjusting the volume balance for Zone2 output
- Renaming the zone name
- Setting the use of switching to the party mode on Zone2
- Configuring the system settings
- Checking the system information on the unit
- Setting the on-screen menu language
- Combining audio of another input source with video of the current input source
- Setting input sources to be skipped when operating the INPUT key
- Automatically changing the input source names displayed on the front display
- Manually changing the input source names displayed on the front display
- Setting the use of Auto Play function
- Setting sound programs to skip when operating the PROGRAM key
- Setting the function for the PROGRAM key on the remote control
- Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control
- Adjusting the brightness of the front display
- Setting the scale of the volume display
- Setting the use of short messages on the TV
- Setting the image to be used as wallpaper on the TV
- Specifying the condition for the TRIGGER OUT jack to function
- Specifying the output level of the electronic signal transmitted with each input
- Switching the output level for electronic signal transmission manually
- Specifying the zone with which the TRIGGER OUT jack functions are synchronized
- Setting the amount of time for the auto-standby function
- Setting the use of the eco mode
- Preventing accidental changes to the settings
- Updating the firmware via the network
- Configuring the advanced settings (ADVANCED SETUP menu)
- Basic operation of the ADVANCED SETUP menu
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SP IMP.)
- Selecting the remote control ID (REMOTE ID)
- Changing the FM/AM tuning frequency setting (TU)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MON.CHK)
- Selecting the HDMI 4K signal format (4K MODE)
- Setting DTS Format Notification (DTS MODE)
- Backuping and restoring all the settings (BKUP/RSTR)
- Restoring the default settings (INIT)
- Updating the firmware (UPDATE)
- Checking the firmware version (VERSION)
- Troubleshooting
- When any problem appears
- If trouble occurs, first check the following:
- Power, system, or remote control trouble
- The power does not turn on
- The power does not turn on in synchronization with the TV
- The power does not turn off
- The power turns off (standby mode) immediately
- The unit enters standby mode automatically
- The unit is not reacting
- The unit cannot be controlled using the remote control
- Cannot select the desired input source even if “INPUT” is pressed
- The RED/GREEN/YELLOW/BLUE keys of the remote control do not operate
- Audio trouble
- No sound
- The volume cannot be increased
- No sound is coming from a specific speaker
- No sound is coming from the subwoofer
- No sound from the playback device connected to the unit with HDMI
- No sound from the playback device when HDMI Control is used
- No sound from the TV when HDMI Control is used
- Only the front speakers work on multichannel audio
- Noise/hum is heard
- The sound is distorted
- Video trouble
- FM/AM radio trouble (AM radio feature is not available for the U.K., Europe, Russia and Australia models)
- DAB radio trouble (U.K., Europe, Russia and Australia models)
- USB trouble
- Network trouble
- The network feature does not function
- The unit cannot connect to the Internet via a wireless router (access point)
- Wireless network is not found
- The unit does not detect the media server (PC/NAS)
- The files in the media server (PC/NAS) cannot be viewed or played back
- The Internet radio cannot be played
- The iPhone does not recognize the unit when using AirPlay
- The application for mobile devices does not detect the unit
- Firmware update via the network is failed
- Bluetooth® trouble
- Error indications on the front display
- When any problem appears
- Appendix
- Updating the unit’s firmware via the network
- Connecting to a network wirelessly
- Selecting a wireless network connection method
- Setting up a wireless connection using the WPS button
- Setting up a wireless connection using an iOS device
- Setting up a wireless connection by selecting from the list of available access points
- Setting up a wireless connection manually
- Setting up a wireless connection by using the WPS PIN code
- Input/output jacks and cables
- Using presence speakers
- Glossary
- Supported devices and file formats
- Video signal flow
- Additional information on HDMI
- Trademarks
- Specifications
- Default settings
- Additional Features
Connecting to a network wirelessly.................................................... 169
Selecting a wireless network connection method.................................................................................................. 169
Setting up a wireless connection using the WPS button..................................................................................... 170
Setting up a wireless connection using an iOS device.......................................................................................... 170
Setting up a wireless connection by selecting from the list of available access points............................ 172
Setting up a wireless connection manually............................................................................................................... 173
Setting up a wireless connection by using the WPS PIN code........................................................................... 175
Input/output jacks and cables............................................................. 176
Video/audio jacks................................................................................................................................................................ 176
Video jacks............................................................................................................................................................................. 176
Audio jacks............................................................................................................................................................................ 177
Using presence speakers...................................................................... 178
Presence speaker layout................................................................................................................................................... 178
Installing the presence speakers in Front Height position.................................................................................. 178
Installing the presence speakers in Overhead position........................................................................................ 178
Using Dolby Enabled speakers as the presence speakers.................................................................................... 179
Glossary................................................................................................. 180
Glossary of audio information........................................................................................................................................ 180
Glossary of HDMI and video information................................................................................................................... 181
Glossary of network information................................................................................................................................... 182
Glossary of Yamaha technologies................................................................................................................................. 182
Supported devices and file formats.................................................... 183
Supported Bluetooth® devices....................................................................................................................................... 183
Supported USB devices..................................................................................................................................................... 183
Supported AirPlay devices............................................................................................................................................... 183
Supported file formats...................................................................................................................................................... 184
Video signal flow.................................................................................. 184
Video signal flow................................................................................................................................................................. 184
Video conversion table..................................................................................................................................................... 185
Additional information on HDMI......................................................... 186
HDMI Control and synchronized operations............................................................................................................ 186
Audio Return Channel (ARC)........................................................................................................................................... 187
HDMI signal compatibility............................................................................................................................................... 188
Trademarks........................................................................................... 189
Trademarks............................................................................................................................................................................ 189
Specifications........................................................................................ 190
Specifications........................................................................................................................................................................ 190
Default settings.................................................................................... 194
Default settings of the Option menu........................................................................................................................... 194
Default settings of the Setup menu............................................................................................................................. 194
Default settings of the ADVANCED SETUP menu.................................................................................................... 196
En
7