AV Receiver Owner’s Manual Be sure to read “Safety Brochure” (supplied booklet) before using this unit.
CONTENTS 9 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . 35 FEATURES What you can do with this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 10 Optimizing the speaker settings automatically (YPAO) . . . . . . . . 36 Measuring at one listening position (single measure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing back music stored on a USB storage device . . . . . . . . . . . . . . 61 Viewing information about this unit (Information menu) . . . . . . . . 101 Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Types of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Reference diagram (rear panel) . . . . . . . . . . . .
Accessories Operating range of the remote control Check that the following accessories are supplied with this product. ■ Remote control • Aim the remote control directly at the remote control sensor on this unit during operation. ■ Batteries (AAA, R03, UM-4) (x 2) Within 6 m 30° 30° Insert into the remote control in the correct polarity (+/-) ■ YPAO microphone ■ Power cable *The figure of the supplied power cable differs depending on regions.
FEATURES What you can do with this unit Ready for any kind of contents Network iPod p.54 p.64 to p.67 USB p.59 p.61 Bluetooth Supports 2 to 7.1 (plus presence) channel speaker system. Allows you to enjoy favorite acoustic spaces in various styles. Automatically optimizing the speaker p.36 settings to suit your room (YPAO) Sound field reproductions like actual p.46 movie theaters and concert halls from stereo or multi-channel audio sources (CINEMA DSP) Enjoying compressed music with p.
Full of useful functions! ● Connecting various devices (p.26) A number of HDMI jacks and various input/output jacks on this unit allow you to connect video devices such as BD/DVD players, audio devices such as CD players, game consoles and camcorders, and so on. ● Creating stereoscopic sound fields (p.48) At time like this Connection of presence speakers enables to create a natural stereoscopic sound field in your room (CINEMA DSP 3D).
Part names and functions Front panel 1 2 3 4 5 6 7 8 9 0 A B Opening the front panel door • To use controls or jacks behind the front panel door, gently press the bottom of the door to open it. Keep the door closed when not using controls or jacks behind the front panel door.
Front display (indicators) OUT1/OUT2 Indicate the HDMI OUT jacks currently outputting an HDMI signal. 2 CINEMA DSP Lights up when CINEMA DSP (p.46) is working. CINEMA DSP 3 Lights up when CINEMA DSP 3D (p.48) is working. 3 ENHANCER Lights up when Compressed Music Enhancer (p.49) is working. 4 ADAPTIVE DRC Lights up when Adaptive DRC (p.78) is working. 5 STEREO 5 6 7 89 SLEEP ZONE 2 0 VOL. MUTE SW PL PR C L R SL SR SBL SB SBR A Lights up when HDMI signals are being input or output.
Rear panel 1 23 45 7 6 8 RS-232C DOCK NETWORK HDMI 1 HDMI OUT 2 1 PHONO COMPONENT VIDEO AM HDMI 3 HDMI 4 HDMI 5 HDMI 6 HDMI 7 SPEAKERS ANTENNA L HDMI 2 (BD/DVD) ARC R COMPONENT VIDEO FM FRONT L R SURROUND L CENTER R SURROUND BACK/ BI–AMP L R ZONE 2/PRESENCE L REMOTE PR IN PR R SINGLE S VIDEO GND OUT 75Ω PB PB VIDEO VIDEO Y Y MONITOR OUT +12V 0.1A MAX.
Remote control 1 Remote control signal transmitter Transmits infrared signals. 1 2 2 MAIN/ZONE2 MAIN ZONE 2 CODE SET SOURCE RECEIVER 3 HDMI 1 4 2 5 6 1 2 3 4 7 V-AUX 3 4 5 6 AUDIO DOCK PHONO NET USB 5 FM AM 6 PRESET TUNING INFO MEMORY 7 MOVIE MUSIC SLEEP PARTY 0 A SUR.
SETUP General setup procedure 1 Placing speakers (p.13) Select the speaker layout depending on the number of speakers and place the speakers in your room. 2 Connecting speakers (p.17) Connect the speakers to this unit. 3 Connecting a TV (p.21) Connect a TV to this unit. 4 Connecting playback devices (p.26) Connect video devices (BD/DVD players, etc.) and audio devices (CD players, etc.) to this unit. 5 Connecting the FM/AM antennas (p.30) Connect the supplied FM/AM antennas to this unit.
1 Speaker placement 2 3 4 5 6 7 8 9 10 1 Placing speakers Select the speaker layout depending on the number of speakers and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples. Caution • This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm speakers, set the speaker impedance of this unit to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
1 Speaker placement 2 3 4 5 6 7 8 9 10 7.1+2 channel system 7.1 channel system (using surround back speakers) • The surround back speakers and presence speakers do not produce sounds simultaneously. This unit automatically switches the speakers to be used depending on a selected CINEMA DSP (p.46). 7.1 channel system (using presence speakers) 6.
1 Speaker placement 2 3 4 5 6 7 8 9 10 5.1 channel system 4.1 channel system 3.1 channel system 2.
1 Speaker placement 2 3 4 5 6 7 8 9 10 ■ Setting the speaker impedance This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm speakers, set the speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers. connecting speakers, connect the supplied power cable to 1 Before this unit and then to an AC wall outlet. 2 While holding down STRAIGHT on the front panel, press MAIN ZONE . MAIN ZONE STRAIGHT 3 Check that “SP IMP.
1 2 Speaker connections 3 4 5 6 7 8 9 10 2 Connecting speakers Connect the speakers placed in your room to the unit. Here are connections of 7.1+2, 7.1 and 6.1 channel system as examples. If you select another system, connect speakers while referring to the connection of 6.1 channel system. 7.1+2 channel system This unit (rear) 7.
1 2 Speaker connections 3 4 5 6 7 8 9 10 7.1 channel system (using presence speakers) This unit (rear) 6.1 channel system This unit (rear) When using only one surround back speaker, connect it to the SINGLE jack (L side).
1 2 Speaker connections 3 4 5 6 7 8 9 10 ■ Connecting speaker cables Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive. a Remove approximately 10 mm of insulation from the ends of the speaker cable, and twist the bare wires of the cable together firmly. b Loosen the speaker terminal.
Input/output jacks and cables ■ Video/audio jacks ■ Video jacks ■ Audio jacks HDMI jacks COMPONENT VIDEO jacks OPTICAL jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit video signals separated into three components: luminance (Y), chrominance blue (PB), and chrominance red (PR). Use a component video cable with three plugs. Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable.
1 2 3 TV connection 4 5 6 7 8 9 10 3 Connecting a TV Connect a TV to this unit so that videos input to this unit can be output to the TV. You can also enjoy playback of TV audio on this unit. The connection method varies depending on functions and video input jacks available on your TV. Refer to the instruction manual of the TV and choose a connection method. Does your TV support Audio Return Channel (ARC)? Yes ■ Connection method 1 (p.
1 2 3 TV connection 4 5 6 7 8 9 10 Necessary settings To use HDMI Control and ARC, you need to configure the following settings. For details on settings and operations of your TV, refer to the instruction manual of the TV. connecting external devices (TV, playback devices, etc.) and 1 After power cable of this unit, turn on this unit, TV and playback devices. 2 Configure the settings of this unit. a Check that ARC is enabled on the TV. b Switch the TV input to display the video from this unit.
1 2 3 TV connection 4 5 6 7 8 9 10 ■ Connection method 2 (HDMI Control-compatible TV) Necessary settings Connect the TV to this unit with an HDMI cable and a digital optical cable. To use HDMI Control, you need to configure the following settings. For details on settings and operations of your TV, refer to the instruction manual of the TV. • The following explanation is based on the assumption that you have not changed the “HDMI” parameters (p.96) in the “Setup” menu.
1 2 3 TV connection 4 5 6 7 8 9 10 3 Configure the settings for HDMI Control. a Enable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/ DVD player, etc). b Turn off the main power of the TV and then turn off this unit and playback devices. c Turn on the main power of the TV and then turn on this unit and playback devices. ■ Connection method 3 (TV with HDMI input jacks) Connect the TV to this unit with an HDMI cable and a digital optical cable.
1 2 3 TV connection 4 5 6 7 8 9 10 ■ Connection method 4 (TV without HDMI input jacks) VIDEO (composite video) connection (with a video pin cable) Depending on the video input jacks available on your TV, choose one of the following connections. If you select “AV4” as the input source by pressing AV4 or SCENE(TV), the TV audio will be played back on this unit.
1 2 3 4 Playback device connections 5 6 7 8 9 10 4 Connecting playback devices This unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod, a Bluetooth component or a USB storage device, see the following pages. - Connecting an iPod (p.54) - Connecting a Bluetooth receiver (p.59) - Connecting a USB storage device (p.
1 2 3 4 Playback device connections 5 6 7 8 9 10 ■ S-video connection ■ Composite video connection Connect a video device to this unit with an S-video cable and a stereo pin cable. Connect a video device to this unit with a video pin cable and an audio cable (digital coaxial, digital optical or stereo pin cable). Choose a set of input jacks (on this unit) depending on the audio output jacks available on your video device.
1 2 3 4 Playback device connections 5 6 7 8 9 10 ■ Changing the combination of video/audio input jacks If the combination of video/audio input jacks prepared on this unit does not match your video device, change its combination according to the output jacks of your device. It enables you to connect a video device that has the following video/audio output jacks.
1 2 3 4 Playback device connections 5 6 7 8 9 10 Connecting audio devices (CD players, etc.) Connecting to the jacks on the front panel Connect audio devices such as CD players, MD players and a turntable to this unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as a game console and a camcorder to this unit.
1 2 3 4 5 FM/AM antenna connections 6 7 8 9 10 5 Connecting the FM/AM antennas Connect the supplied FM/AM antennas to this unit.
1 2 3 4 5 6 Network connections 7 8 9 10 6 Connecting to the network Connect this unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). You can enjoy Internet radio or music files stored on PCs and DLNA servers such as Network Attached Storage (NAS) on this unit.
1 2 3 4 5 6 7 Other connections 8 9 10 Connecting video/audio recording devices 7 Connecting other devices You can connect video/audio recording devices to the AV OUT and AUDIO OUT jacks. These jacks output analog video/audio signals selected as the input. Connecting an external power amplifier When connecting an external power amplifier (pre-main amplifier) to enhance speaker output, connect the input jacks of the power amplifier to the PRE OUT jacks of this unit.
1 2 3 4 5 6 7 Other connections 8 9 10 Connecting a device compatible with SCENE link playback (remote connection) Connecting a device compatible with the trigger function If you have a Yamaha product that has the capability of the SCENE control signal transmission, you can control the Yamaha product in conjunction with a scene selection (p.44) by connecting it to the REMOTE OUT jack with a monaural mini-jack cable.
1 2 3 4 5 6 7 8 Power cable connection 9 10 8 Connecting the power cable After all the connections are complete, connect the supplied power cable to this unit and then to an AC wall outlet. This unit (rear) RS-232C MI 3 HDMI 4 HDMI 5 HDMI 6 HDMI 7 SPEAKERS T L R SURROUND L CENTER R SURROUND BACK/ BI–AMP L R ZONE 2/PRESENCE L SINGLE EXTRA SP SINGLE CENTER AC IN L R UDIO OUT ZONE 2 OUT FRONT SURROUND SUR.
1 2 3 4 5 6 7 8 9 Language setting 10 MAIN ZONE 2 CODE SET SOURCE RECEIVER RECEIVER 9 Selecting an on-screen menu language HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB PRESET TUNING Select a desired on-screen menu language from English (default), Japanese, French, German, Spanish and Russian. AV FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY SUR.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup MAIN ZONE 2 CODE SET SOURCE RECEIVER RECEIVER 10 Optimizing the speaker settings automatically (YPAO) HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV AV SUR.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup MAIN ZONE 2 The following screen appears on the TV. CODE SET SOURCE RECEIVER • If you perform the single measure, you will be able to enjoy surround sound at that position with optimized speaker settings. If you perform the multi measure, the speaker settings will be optimized for you to enjoy surround sound in a wider space.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup MAIN ZONE 2 Measuring at one listening position (single measure) CODE SET SOURCE RECEIVER save the measurement results, use the cursor 3 To keys to select “SAVE” and press ENTER. HDMI When “Multi Position” is set to “No”, follow the procedure below to make the measurement. 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB • YPAO measurement is not performed correctly when any obstacles are in the room.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup MAIN ZONE 2 Measuring at multiple listening positions (multi measure) CODE SET SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 When “Multi Position” is set to “Yes”, follow the procedure below to make the measurement. AV 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO MEMORY the measurement at all listening position are 3 Ifmade, use the cursor keys to select “CANCEL” and press ENTER.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup MAIN ZONE 2 Size Distance Distance from the listening position to each speaker Level Output level adjustment for each speaker Caution HDMI 1 Size of each speaker (cross-over frequency of the subwoofer) Large: The speaker can reproduce low-frequency signals effectively. Small: The speaker cannot reproduce low-frequency signals effectively.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Error message Cause Remedy E-1: No Front SP Front speakers are not detected. E-2: No Sur. SP Either of surround speakers is not detected. E-3: No F.PRNS SP Either of presence speakers is not detected. E-4: SBR SBL A surround back speaker is connected to the R side only.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Warning messages Even if any warning message is displayed after the measurement, you can save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again to use this unit with the optimal speaker settings. Warning message Cause Remedy W-1: Out of Phase Any of the speaker cables may be connected with the reversed polarity (+/-). Select “Wiring” in “Result” (p.
MAIN ZONE 2 PLAYBACK CODE SET SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING AV INFO Basic playback procedure Input selection keys MEMORY SUR.
MAIN ZONE 2 CODE SET SOURCE RECEIVER SOURCE/RECEIVER Selecting the input source and favorite settings at once (SCENE) HDMI 1 2 3 4 5 6 7 V-AUX The SCENE function allows you to select the assigned input source, sound program, Compressed Music Enhancer on/off, and HDMI output jack at once. AV 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO MEMORY MOVIE MUSIC SLEEP PARTY 1 Press SCENE.
MAIN ZONE 2 CODE SET Selecting the sound mode SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB PRESET TUNING This unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with a favorite sound mode (sound field effect, stereo playback, etc). AV FM AM INFO MEMORY SUR.
Enjoying sound field effects (CINEMA DSP) Drama This program features stable reverberations that match a wide range of movie genres from serious dramas to musicals and comedies. The reverberations are modest but offer an optimum 3D feeling, reproducing effects tones and background music softly but cubically around clear words and center positioning in a way that does not fatigue the listener even after long hours of viewing.
■ Sound programs suitable for music/stereo playback (MUSIC) The following sound programs are optimized for listening to music sources such as music CDs. You can also select stereo playback. ❑ CLASSICAL Hall in Munich This program simulates a concert hall with approximately 2500 seats in Munich, using stylish wood for the interior finishing as normal standards for European concert halls. Fine, beautiful reverberations spread richly, creating a calming atmosphere.
MAIN ZONE 2 CODE SET SOURCE RECEIVER ■ Enjoying stereoscopic sound fields (CINEMA DSP 3D) Enjoying unprocessed playback CINEMA DSP 3D enables to create a natural stereoscopic sound field in your room. CINEMA DSP 3D functions when both of the following conditions are met. - One of the sound programs (except 2ch Stereo and 7ch Stereo) is selected (p.46). - “CINEMA DSP 3D Mode” (p.78) in the “Option” menu is set to “On” (default).
MAIN ZONE 2 PLIIx Music CODE SET PLII Music SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO MEMORY PLIIx Game PLII Game AV MUSIC SLEEP PARTY BD DVD TV ENHANCER PURE DIRECT SCENE CD RADIO OPTION ON SCREEN ENHANCER PURE DIRECT Enjoying compressed music with enhanced sound (Compressed Music Enhancer) Uses the Dolby Pro Logic IIx decoder (or Dolby Pro Logic II decoder) suitable for games.
MAIN ZONE 2 CODE SET Listening to FM/AM radio SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX You can tune into a radio station by specifying its frequency or selecting from registered radio stations. AV 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET TUNING SUR.
MAIN ZONE 2 ■ Selecting a preset station CODE SET HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING AV TUNER PRESET INFO MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV Radio Data System tuning Tune into a registered radio station by selecting the preset number. SOURCE RECEIVER SUR. DECODE STRAIGHT INFO TUNER to select “TUNER” as the input 1 Press source. PRESET repeatedly to select a desired radio 2 Press station.
MAIN ZONE 2 Operating the radio on the TV CODE SET SOURCE RECEIVER • “Program Service”, “Program Type”, “Radio Text” and “Clock Time” do not appear when the radio station does not provide the Radio Data System service. HDMI 1 2 5 6 3 4 7 V-AUX AV 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO MEMORY MOVIE MUSIC SLEEP PARTY TUNER When “TUNER” is selected as the input source, this unit automatically receives traffic information.
MAIN ZONE 2 Menu CODE SET Submenu Function ■ Browse screen SOURCE RECEIVER FM Switches to FM/AM. HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK 1 AM Tuning (+/-) Selects a frequency. Auto (+/-) Selects a radio station automatically. Memory Registers the selected station as presets. Direct Enters a frequency directly. AV TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV NET USB PRESET TUNING Manual Tuning SUR.
Playing back iPod music/videos You can play back iPod music/videos on this unit using a USB cable supplied with iPod, an optional Yamaha iPod dock (such as YDS-12) or an optional Yamaha iPod wireless system (YID-W10). Connecting an iPod ■ Using a USB cable • This manual describes both the “iPod” and “iPhone” as the “iPod”. “iPod” means both “iPod” and “iPhone” unless the explanation describes exceptions.
■ Using an iPod dock Refer to the instruction manual of the iPod dock in addition. 1 DOCK DOCK When this unit is in standby mode, connect the iPod dock to the DOCK jack. NETWORK HDMI 1 HDMI OUT 2 1 (BD/DVD) ARC PHONO COMPONENT VIDEO Locate the iPod dock at the distance as far as from this unit. ANTENNA L AM COMPONENT VIDEO FM REMOT PR IN PR R GND S VIDEO OUT 75Ω PB PB VIDEO VIDEO Y Y MONITOR OUT +1 0.
MAIN ZONE 2 Playback of iPod contents CODE SET SOURCE RECEIVER When using a USB cable or an iPod dock, you can control the iPod with the menu displayed on the TV. HDMI 1 2 3 4 7 V-AUX 5 6 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB PRESET TUNING ■ Browse screen 1 2 3 AV FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV DOCK USB ENHANCER PURE DIRECT SCENE The browse screen is displayed on the TV.
MAIN ZONE 2 ■ Playback screen CODE SET ■ Operating the iPod itself or remote control (simple play) SOURCE RECEIVER 1 2 HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING 1 Press MODE to switch to the simple play mode. AV INFO MEMORY MOVIE MUSIC SLEEP PARTY 3 4 The TV menu screen turns off and iPod operations are enabled. To display the TV menu screen, press MODE again.
MAIN ZONE 2 ■ Shuffle/repeat settings CODE SET You can configure the shuffle/repeat settings of your iPod. SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING • When using an iPod wireless system, configure the shuffle/repeat settings directly on your iPod.
MAIN ZONE 2 CODE SET Playing back music via Bluetooth SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX AV 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO MEMORY MOVIE MUSIC SLEEP PARTY DOCK You can play back music stored on a Bluetooth component on this unit using a Yamaha Bluetooth wireless audio receiver (such as YBA-10, optional). Refer to the instruction manuals of the Bluetooth receiver and your Bluetooth component in addition.
MAIN ZONE 2 the Bluetooth receiver from the device list 4 Select and enter the pass key “0000”. CODE SET SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB PRESET TUNING “Completed” appears when the pairing is complete. DOCK AV FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV Completed • Depending on Bluetooth components, “BT connected” appears when the pairing is complete.
MAIN ZONE 2 CODE SET Playing back music stored on a USB storage device SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX AV 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO USB Playback of USB storage device contents Follow the procedure below to operate the USB storage device contents and start playback. 1 Press USB to select “USB” as the input source. The browse screen is displayed on the TV.
MAIN ZONE 2 ■ Browse screen CODE SET ■ Playback screen SOURCE RECEIVER 1 2 3 HDMI 1 2 3 4 7 V-AUX 5 6 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB PRESET TUNING AV FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY 1 2 3 5 4 4 SUR. DECODE STRAIGHT 1 Status indicators ENHANCER PURE DIRECT Display the current shuffle/repeat settings (p.63) and playback status.
MAIN ZONE 2 ■ Shuffle/repeat settings CODE SET You can configure the shuffle/repeat settings for playback of USB storage device contents. SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING AV INFO MEMORY MOVIE MUSIC SLEEP PARTY • The shuffle/repeat settings are shared by USB and network sources. “USB” is selected as the input source, press 1 When OPTION.
MAIN ZONE 2 CODE SET Playing back music stored on PCs SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX You can play back music files stored on your PC or DLNAcompatible NAS on this unit. AV 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO MEMORY MOVIE MUSIC SLEEP PARTY Playback of PC music contents Follow the procedure below to operate the PC music contents and start playback.
MAIN ZONE 2 ■ Playback screen CODE SET SOURCE RECEIVER • To return to the previous screen, press RETURN. 1 2 HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING • Files not supported by this unit are not listed (or cannot be selected even if listed). • You can register your favorite items as shortcuts (p.73) and access them directly by selecting the shortcut numbers.
MAIN ZONE 2 ■ Shuffle/repeat settings CODE SET You can configure the shuffle/repeat settings for playback of PC music contents. SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO MEMORY MOVIE MUSIC SLEEP PARTY AV • The shuffle/repeat settings are shared by USB and network sources. “PC” is selected as the input source, press 1 When OPTION.
MAIN ZONE 2 CODE SET Listening to Internet radio SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX You can listen to Internet radio stations using the vTuner Internet radio station database service particularly customized for this unit, providing a database of numerous radio stations in the world. AV 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO • To use this function, this unit must be connected to the Internet (p.31).
MAIN ZONE 2 CODE SET SOURCE RECEIVER • By adding your favorite Internet radio stations to “Bookmarks”, you can access to them quickly from “Bookmarks”. To remove stations from “Bookmarks”, select the station in “Bookmarks” and then “Bookmark Off”. HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK PHONO NET USB FM AM PRESET TUNING INFO MEMORY MOVIE MUSIC SLEEP PARTY ENHANCER PURE DIRECT 1 2 SCENE TV CD ) on the remote ■ Playback screen SUR.
Playing back music in multiple rooms (multi-zone) The multi-zone function allows you to play back separate input sources in the room where this unit is installed (main zone) and another room (Zone2). For example, while you are watching a TV in the living room (main zone), another person can listen to radio in the bedroom (Zone2). ■ Using the internal amplifier of this unit Connect the speakers placed in Zone2 to this unit with speaker cables.
■ Using an external amplifier Connect the external amplifier placed in Zone2 to this unit with a stereo pin cable. This unit (rear) HDMI 1 HDMI OUT 2 HDMI 2 HDMI 3 R COMPONENT VIDEO FM FRONT By connecting an infrared signal receiver/emitter to the REMOTE IN/OUT jacks of this unit, you can operate this unit and external devices from Zone2 with the supplied remote control.
MAIN ZONE 2 CODE SET MAIN/ZONE2 SOURCE RECEIVER RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY V-AUX AV PRESET TUNING SUR. DECODE STRAIGHT Controlling Zone2 1 Set MAIN/ZONE2 to “ZONE2”.
MAIN ZONE 2 playback on the external device, or select a 4 Start radio station. CODE SET SOURCE RECEIVER HDMI 1 2 3 4 7 V-AUX 5 6 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING Refer to the instruction manual of the external device. For details on the following operations, see the corresponding pages. - Listening to FM/AM radio (p.50) - Playing back iPod music (p.54) - Playing back music via Bluetooth (p.59) - Playing back music stored on a USB storage device (p.
MAIN ZONE 2 CODE SET Useful functions SOURCE RECEIVER HDMI 3 4 7 V-AUX 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB PRESET TUNING 1 2 5 6 Registering favorite items (shortcut) AV 1 FM AM INFO MEMORY NET USB MEMORY PRESET SUR. DECODE STRAIGHT MOVIE MUSIC SLEEP PARTY ENHANCER PURE DIRECT TV CD RADIO RETURN 1 Play back a song or a radio station to be registered. 2 Press MEMORY. VOLUME ENTER DISPLAY A POP-UP MENU TOP MENU MEMORY MUTE VOL.
Controlling this unit from the web browser (web control) ■ Top menu screen You can control this unit with the web control screen displayed in the web browser. 1 Web browser Web control PC Web control Router This unit 5 2 6 3 4 7 1 CONTROL Moves to the control screen for the selected zone. • To use this function, this unit and your PC must be connected to the network properly (p.31). • Some security software installed on your PC may block the access of this unit to your PC.
■ Control screen ■ Settings screen 3 1 4 1 5 2 6 1 PLAY INFO Selects an input source or controls playback for the selected zone. 2 TOP MENU Moves to the top menu screen. 3 SCENE Select a scene for the main zone. 4 POWER Turns on/off the power for the selected zone. 5 VOLUME Adjusts the volume or mutes the audio output for the selected zone. You can also switch the step for the volume adjustment. (These functions are available only when the internal amplifier of this unit is used.
MAIN ZONE 2 Note • Do not operate this unit during the recovery process (restoring the settings). Otherwise, the settings may not be restored correctly. When the recovery finishes, click “OK” to set this unit to standby mode. HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING MEMORY MOVIE MUSIC SLEEP PARTY SUR.
Configuring settings in accordance with a playback source (Option menu) You can configure the playback-related settings in accordance with a playback source. Since this menu is operational on the front panel (or on the TV screen), you can easily configure the settings during playback. 1 Press OPTION. OPTION Tone Control Option menu items • Available items vary depending on the selected input source. • Texts in parentheses denote indications on the front display. VOL.
■ Tone Control (Tone Control) ■ CINEMA DSP 3D Mode (CINEMA DSP 3D) Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of speaker sounds. When connecting headphones, you can adjust high-frequency range and lowfrequency range of sounds output from headphones. Enables/disables CINEMA DSP 3D. If this function is set to “On”, CINEMA DSP 3D functions according to the selected sound programs (except 2ch Stereo and 7ch Stereo).
■ Extended Surround (EXTD Surround) ■ Enhancer (Enhancer) Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used. Enables/disables Compressed Music Enhancer (p.49). Settings • This setting is applied separately to each input source. Auto (Auto) (default) Automatically selects the most suitable decoder if a flag for reproducing surround back channel is present, and reproduces the signals in 6.1- or 7.1-channel.
CONFIGURATIONS Configuring input sources (Input menu) 4 Use the cursor keys ( / ) to select an item and press ENTER. You can change the input source settings using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Input” and press ENTER. • To return to the previous screen during menu operations, press RETURN. the cursor keys ( / ) to select an input source to be configured 3 Use and press the cursor key ( ). 5 Use the cursor keys to select a setting and press ENTER.
■ Rename/Icon Select (To input audio through analog audio jacks) Changes the input source name and icon displayed on the front display or TV screen. Select “AV5”, “AV6”, “AUDIO1” or “AUDIO2”, and connect the device to the corresponding audio jacks of this unit with a stereo pin cable. Input sources HDMI1~7, AV1~6, V-AUX, AUDIO1~2, PHONO, USB, DOCK ■ Setup procedure 1 Use the cursor keys ( / ) to select an icon and press the cursor key ( ).
■ iPod Interlock ■ DMC Control Selects whether to control this unit in conjunction with operations of the iPod connected to the iPod wireless system. Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback. Input sources DOCK (iPod) Input source PC Settings • This function is available only when an iPod wireless system is connected to this unit. Disable Does not allow DMCs to control playback. ❑ Power & Input Enable (default) Allows DMCs to control playback.
Configuring the SCENE function (Scene menu) You can change the settings of the SCENE function (p.44) using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Scene” and press ENTER. the cursor keys ( 3 Use cursor key ( ). / ) to select a scene to be configured and press the 5 Use the cursor keys and ENTER to change the setting. 6 To exit from the menu, press ON SCREEN.
■ Load ■ Rename/Icon Select Loads the settings registered to selected scene. Select “DETAIL” to configure the SCENE link playback setting or view the scene assignments. Changes the scene name and icon displayed on the front display or TV screen.
Configuring sound programs/surround decoders (Sound Program menu) 4 Use the cursor keys ( / ) to select an item and press ENTER. You can change the settings of the sound programs and surround decoders using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Sound Program” and press ENTER. • To return to the previous screen during menu operations, press RETURN. • To restore the default settings for the selected sound program, select “Reset”.
Sound Program menu items Item Function Settings Reverb Delay Adjusts the delay between the direct sound and rear reverberant sound generation. 0 ms ~ 250ms Higher to enhance the delay effect and lower to reduce. Reverb Level Adjusts the volume of the reverberant sound. 0% ~ 100% Higher to strengthen the reverberant sound and lower to weaken. • Available items vary depending on the selected sound program or surround decoder.
■ Settings for decoders The following items are available when you set “Decode Type” of “Surround Decoder” to “PLIIx Music” or “Neo:6 Music”. Decode Type PLIIx Music Neo:6 Music Item Function Settings Panorama Adjusts the broadening effect of the front sound field. Off (default), On Select “On” to wrap front right/left channel sounds around the field and generate a spacious sound field in combination with the surround sound field.
Configuring various functions (Setup menu) You can configure the various functions of this unit using the TV screen. 5 Use the cursor keys to select a setting and press ENTER. 6 To exit from the menu, press ON SCREEN. 1 Press ON SCREEN. 2 Use the cursor keys to select “Setup” and press ENTER. 3 Use the cursor keys ( / ) to select a menu. 4 Use the cursor keys ( / ) to select an item and press ENTER. • To return to the previous screen during menu operations, press RETURN.
Setup menu items Menu Item Function Auto Setup Optimizes the speaker settings automatically (YPAO). 36 Selects a speaker system. 91 Front Selects the size of the front speakers. 91 Center Selects whether or not a center speaker is connected and its size. 91 Surround Selects whether or not surround speakers are connected and its size. 91 Surround Back Selects whether or not surround back speakers are connected and its size.
Menu Item Function Page Max Volume Sets the Zone2 maximum volume so that sound is not too loud. 98 Initial Volume Sets the Zone2 initial volume for when this unit is turned on. 98 Party Mode Set Enables/disables switching to the party mode. 99 Zone Rename Changes the zone names displayed on the TV screen. 99 Zone2 Set Multi Zone Sets the amount of time for auto-standby. 99 Dimmer Adjusts the brightness of the front display. 99 Scroll Sets the scrolling manner of the front display.
Speaker (Manual Setup) Configures the speaker settings manually. ■ Configuration Configures the output characteristics of the speakers. • When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm or larger or “small” if it is smaller than 16 cm. ❑ Front Selects the size of the front speakers. Settings ■ Power Amp Assign Large Select this for large speakers. The front speakers will produce all of the front channel frequency components.
❑ Surround Back ❑ Extra Bass Selects whether or not surround back speakers are connected and its size. Sets the speakers to produce the front channel low-frequency components. Settings Settings Large x1 Select this when 1 large speaker is connected. The surround back speaker will produce all of the surround back channel frequency components. Large x2 Select this when 2 large speakers are connected. The surround back speakers will produce all of the surround back channel frequency components.
■ Level ■ Manual equalizer adjustment Adjusts the volume of each speaker. Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Subwoofer Setting range -10.0dB ~ +10.0dB (0.5dB steps) 1 Set “PEQ Select” to “Manual” and press ENTER. 2 Use the cursor keys to select a speaker and press ENTER. 3 Use the cursor keys to select an item and press ENTER.
Sound ■ Dynamic Range Configures the audio output settings. Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. Settings ■ Lipsync Adjusts the delay between video and audio output. ❑ Auto Adjusts the delay between video and audio output automatically when a TV that supports an automatic lipsync function is connected to this unit via HDMI. If necessary, you can fine-adjust the audio output timing.
■ Processing Video Configures the video output settings. Enables/disables the video signal processing (resolution and aspect ratio). Settings Off (default) Disables the video signal processing. On Enables the video signal processing. Select a resolution and an aspect ratio in “Resolution” and “Aspect”. • 720p-, 1080i- and 1080p-resolution video signals cannot be converted (p.122). ❑ Resolution ■ Analog to Analog Conversion Enables/disables the video conversion (p.
❑ ARC HDMI Enables/disables ARC (p.21) when “HDMI Control” is set to “On”. Configures the settings related to HDMI. Settings Off Disables ARC. On (default) Enables ARC. • You do not need to change this setting normally. In case noises are produced from the speakers connected to this unit because TV audio signals input to this unit via ARC are not supported by this unit, set “ARC” to “Off” and use the TV speaker.
■ Audio Output Network Selects a device to output audio. Configures the network settings. • The “Amp” and “HDMI OUT1” settings are available only when “HDMI Control” is set to “Off”. ❑ Amp Enables/disables the audio output from the speakers connected to this unit. Settings Off Disables the audio output from the speakers. On (default) Enables the audio output from the speakers. ❑ HDMI OUT1, HDMI OUT2 Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or HDMI OUT 2 jack.
■ Network Standby Multi Zone Selects whether to turn on this unit by the command from other network devices (network standby). Configures the multi zone settings. Settings Off (default) Disables the network standby function. On Enables the network standby function. (This unit consumes approximately 5 W of power.) ■ MAC Address Filter Sets the MAC address filter to limit access to this unit from other network devices. ❑ Mode Enables/disables the MAC address filter.
■ Party Mode Set Enables/disables switching to the party mode (p.72). Function Configures the functions that make this unit easier to use. Choice Target: Zone 2 Settings Disable Disables switching to the party mode. Enable (default) Enables switching to the party mode. You can turn on/off the party mode by pressing PARTY on the remote control. ■ Zone Rename Changes the zone names displayed on the TV screen. ■ Setup procedure 1 Use the cursor keys to select a zone to be renamed and press ENTER.
❑ Short Message Selects whether to display short messages on the TV screen when this unit is operated (input selection, volume adjustment, etc). Zone2 When “Trigger Mode” is set to “Power,” electronic signal transmission is synchronized with power status of Zone2. When “Trigger Mode” is set to “Source,” electronic signal transmission is synchronized with input switching in Zone2.
Language Select an on-screen menu language. Viewing information about this unit (Information menu) You can view information about this unit using the TV screen. 1 Press ON SCREEN. 2 Use the cursor keys to select “Information” and press ENTER. Settings English (default) English Japanese Français French Deutsch German Español Spanish 3 Use the cursor keys ( / ) to select an information type. Russian • The information on the front display is provided in English only.
■ Network Types of information Displays the network information on this unit. ■ Audio Signal IP Address IP address Displays information about the current audio signal. Subnet Mask Subnet mask Default Gateway The IP address of the default gateway DNS Server (P) The IP address of the primary DNS server Format Audio format of the input signal Channel The number of source channels in the input signal (front/ surround/LFE) For example, “5.1 (3/2/0.1)” means 5.
ADVANCED SETUP menu items Configuring the system settings (ADVANCED SETUP menu) Item Function You can configure the system settings of this unit using the front display. SP IMP. Changes the speaker impedance setting. 103 1 Set this unit to standby mode. 2 While holding down STRAIGHT on the font panel, press MAIN ZONE REMOTE ID Selects the remote control ID of the main unit. 104 TV FORMAT Switches the video signal type. 104 MAIN ZONE PROGRAM STRAIGHT 3 Press PROGRAM to select an item.
Selecting the remote control ID (REMOTE ID) REMOTE ID -ID1 Select the remote control ID of the main unit so that it matches to the ID of the remote control (default: ID1). When using multiple Yamaha AV receivers, you can set each remote control with a unique remote control ID for its corresponding receiver. Settings ID1 (default), ID2 ■ Changing the remote control ID of the remote control Perform each of the following steps within 1 minute. Otherwise, the setting will be automatically canceled.
Updating the firmware (UPDATE) New firmware will be released irregularly for the purpose of additional features or product improvements. It can be downloaded from our website. If this unit is connected to the Internet, you can download the firmware via the network. For details, refer to the information supplied with updates. VOL. MUTE UPDATE- USB SW PR PL C L R SL SR SBL SB SBR ■ Firmware update procedure Do not perform this procedure unless firmware update is necessary.
MAIN ZONE 2 CODE SET SOURCE RECEIVER CODE SET SOURCE/RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB FM AM PRESET TUNING INFO MEMORY Controlling external devices with the remote control By setting the code for external devices (BD/DVD players, etc.), you can operate it with the remote control of this unit. AV • You cannot control an external device that does not have a remote control sensor.
MAIN ZONE 2 CODE SET SOURCE RECEIVER SOURCE CODE SET SOURCE/RECEIVER Setting the remote control codes for playback devices HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB PRESET TUNING AV FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY Input selection key • At the factory, Yamaha CD player code (5095) is set for AV3. For the other input selection keys, no codes are set. SUR.
MAIN ZONE 2 CODE SET SOURCE RECEIVER SOURCE CODE SET SOURCE/RECEIVER Programming from other remote controls (learning) HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB PRESET TUNING The remote control of this unit can receive remote control signals from other remote controls and learn the remote control operation.
MAIN ZONE 2 CODE SET SOURCE RECEIVER CODE SET SOURCE/RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX AV 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB PRESET TUNING FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY BD DVD TV Input selection key • The settings for controlling playback devices after selecting a scene (p.44) will be also cleared. CODE SET using a pointed object such as the 1 Press tip of a ballpoint pen. ENHANCER PURE DIRECT SOURCE/RECEIVER blinks twice.
MAIN ZONE 2 CODE SET Updating the firmware of this unit SOURCE RECEIVER HDMI 1 2 3 4 5 6 7 V-AUX 1 2 3 4 5 6 AUDIO DOCK TUNER PHONO NET USB If this unit is connected to the Internet, the corresponding message will be displayed on the TV when a newer firmware is available. In this case, follow the procedure below to update the firmware of this unit. AV “UPDATE SUCCESS PLEASE POWER OFF!” 3 Ifappears on the front display, press MAIN ZONE on the front panel.
APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... I want to turn off the onscreen messages displayed during operations... If you have changed speakers or speaker system, use “Auto Setup” to optimize the speaker settings again (p.36). If you want to adjust the speaker settings manually, use “Manual Setup” in the “Setup” menu (p.91).
Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the followings: a The power cables of this unit, TV and playback devices (BD/DVD player, etc.) are connected to AC outlets securely.
Audio Problem No sound. The volume cannot be increased. No sound is heard from a specific speaker. No sound is heard from the surround back speaker. No sound is heard from the subwoofer. No sound from the playback device (connected to this unit with HDMI). Cause Remedy Another input source is selected. Select an appropriate input source with the input selection keys Signals that this unit cannot reproduce are being input. Some digital audio formats cannot be played back on this unit.
Problem No sound from the TV (when HDMI Control is used). Only the front speakers work on multichannel audio. Noise/hum is heard. The sound is distorted. Cause Remedy (If the TV is connected to this unit with an audio cable) The TV audio input setting does not match the actual connection. Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack (p.96). (If you are trying to use ARC) ARC is disabled on this unit or TV. Set “ARC” in the “Setup” menu to “On” (p.96).
FM/AM radio Problem Cause There is multi-path interference. FM radio reception is weak or noisy. AM radio reception is weak or noisy. Remedy Adjust the FM antenna height or orientation, or place it in a different location. Press MODE to select monaural FM radio reception (p.50). Your area is too far from the FM station transmitter. Use an outdoor FM antenna commercially available. We recommend using a sensitive multi-element antenna.
Problem The files in the PC cannot be viewed or played back. The Internet radio cannot be played. Cause Remedy The files are not supported by this unit or the media server. Use the file format supported by both this unit and the media server. For information about the file formats supported by this unit, see “Playing back music stored on PCs” (p.64). The selected Internet radio station is currently not available.
Error indications on the front display Message (alphabetical order) Access denied Access error Cause Access to the PC is denied. Remedy Configure the sharing setting and select this unit as a device to which music contents are shared (p.64). This unit cannot access the USB device. Turn off this unit and reconnect your USB device. If the problem persists, try another USB device. This unit cannot access the iPod connected to the USB jack. Turn off the iPod and turn on it again.
Ideal speaker layout Use this diagram as guide. You do not need to adjust the speaker layout to the following diagram exactly. 0.5 to 1 m 0.5 to 1 m 1.8 m 1.8 m Turn it slightly inward to reduce wall reflections. Turn it slightly inward to reduce wall reflections.
Glossary Audio information Audio and video synchronization (Lipsync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem, and the capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustment, HDMI version 1.
DTS Digital Surround MP3 DTS Digital Surround was developed to replace the analog soundtracks of movies with a 5.1-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. DTS, Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS Digital Surround in your home. This system produces practically distortion-free 5.
Video information Component video signal With the component video signal system, the video signal is separated into the Y signal for luminance and the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. The component signal is also called the “color difference signal” because the luminance signal is subtracted from the color signal. A monitor with component input jacks is required in order to output component signals.
■ Video conversion table Video signal flow Video signals input from a video device to this unit are output to a TV as shown below. (solid line) is always available. (dotted line) is available only when “Analog to Analog Conversion” (p.95) in the “Setup” menu is set to “On” (default). • You can select a resolution and an aspect ratio applied to HDMI-output video processing. • This unit does not convert 480-line and 576-line video signals interchangeably.
To use HDMI Control, you need to perform the following HDMI Control link setup after connecting the TV and playback devices. Information on HDMI HDMI Control • This setup is required every time when you add a new HDMI Control-compatible device to your system. HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to this unit with an HDMI cable, you can control this unit (power, volume, etc.) in conjunction with TV remote control operations.
HDMI signal compatibility Audio signals Audio signal type Audio signal format Compatible media (example) 2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio Multi-channel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit DVD-Audio, BD (Blu-ray disc), HD DVD DSD 2/5.1ch, 2.
Reference diagram (rear panel) RS-232C DOCK NETWORK HDMI 1 HDMI OUT 2 1 ARC PHONO COMPONENT VIDEO AM HDMI 3 HDMI 4 HDMI 5 HDMI 6 HDMI 7 SPEAKERS ANTENNA L HDMI 2 (BD/DVD) R COMPONENT VIDEO FM FRONT L R SURROUND L CENTER R SURROUND BACK/ BI–AMP L R ZONE 2/PRESENCE L REMOTE PR IN PR R GND SINGLE S VIDEO OUT 75Ω PB PB VIDEO VIDEO Y Y MONITOR OUT +12V 0.1A MAX.
Trademarks “SILENT CINEMA” is a trademark of Yamaha Corporation. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. DLNA Certified is a trademark of the Digital Living Network Alliance in the United States and other countries. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S.
Specifications Input jacks • Analog Audio [U.S.A. and Canada models] Audio x 5 (AV5~6, AUDIO1~2, V-AUX) [Other models] Audio x 6 (AV5~6, AUDIO1~2, PHONO, V-AUX) • Digital Audio (Support fs: 32 kHz to 96 kHz) Optical x 2 (AV1, AV4) Coaxial x 2 (AV2, AV3) • Video • Video MONITOR OUT - Component x 1 - Composite x 1 AV OUT - Composite x 1 • HDMI Output HDMI OUT x 2 (HDMI OUT1~2) Remote jacks • REMOTE IN x 1 Composite x 5 (AV3~6, V-AUX) • REMOTE OUT x 1 S-Video x 1 (AV5) [U.K.
Audio Section • Rated Output Power (20 Hz to 20 kHz, 0.09% THD, 8Ω) • Frequency Response AV5 etc. to Front (10 kHz to 100 kHz) .........................+0/-3 dB • RIAA Equalization Deviation Treble Boost/Cut.......................... ±6 dB/0.5 dB Step at 20 kHz Treble Turnover ............................................................. 3.5 kHz • Filter Characteristics Front L/R .............................................................100 W+100 W [China, Korea, Australia, U.K.
FM Section • Tuning Range [U.S.A. and Canada models] ..............87.5 MHz to 107.9 MHz [Asia and General models] .......................................87.5/87.50 MHz to 108.0/108.00 MHz [Other models].................................87.50 MHz to 108.00 MHz Network Standby On (Typical) .........................................2.0 W • Maximum Power Consumption [Asia and General models] .............................................590 W • Dimensions (W x H x D) ...........................
© 2011 Yamaha Corporation YD455C0/OMEN3
