Owner’s Manual

Menu Item Function Page
Sound
Surround Decoder
Decode Type
Selects a surround decoder to be used. p.123
Center Spread
Selects whether to spread the center channel signals to left and right when 2-channel source is played. p.124
Center Image
Adjusts the center localization (broadening effect) of the front sound field. p.124
7ch Stereo
Level
Adjusts the entire volume for “7ch Stereo”. p.124
Front / Rear Balance
Adjusts the front and rear volume balance for “7ch Stereo”. p.124
Left / Right Balance
Adjusts the left and right volume balance for “7ch Stereo”. p.124
Height Balance
Adjusts the height volume balance using the presence speakers for “7ch Stereo”. p.125
Monaural Mix
Enables/disables monaural sound output for “7ch Stereo”. p.125
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. p.125
Volume
Max Volume
Sets the limit value of the volume. p.125
Initial Volume
Sets the initial volume for when this receiver is turned on. p.126
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted. p.126
Virtual Speaker VSBS
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. p.126
Scene
Scene Setting
Selects items to be included as the scene assignments. p.127
Scene Rename
Renames the scene name displayed on the front display or TV screen. p.128
Video/HDMI
Information
Displays information about the current video signal and the TVs connected to the HDMI OUT jacks. p.129
Video Mode
Video Mode
Enables/disables the video signal processing. p.129
Resolution
Selects a resolution to output HDMI video signals. p.129
Aspect
Selects an aspect ratio to output HDMI video signals. p.130
HDMI Control
HDMI Control
Enables/disables HDMI Control. p.130
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input. p.130
ARC
Enables/disables ARC. p.130
Standby Sync
Selects whether to use HDMI control to link the standby behavior of the TV and the unit. p.131
HDMI Audio Output
Enables/disables the audio output from a TV. p.131
HDCP Version
Selects the version of HDCP used on the HDMI input jacks. p.131
HDMI Standby Through
Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. p.131
En
107