Owner's Manual

Part names and functions
Part names and functions of the front panel
The part names and functions of the front panel are as follows.
AUX
AUDIO
(CONNECT)
PHONES
TONE CONTROL USB
SILENT
CINEMA
STRAIGHT
PROGRAM
YPAO MIC
5V 1A
INPUT
SCENE
MAIN ZONE
PURE DIRECT
VOLUME
INFO (WPS)ZONE 2 ZONE CONTROL
MEMORY PRESET FM AM TUNING
2
1
3
4
C LD F G HE I KJ
2
A5 6
431 987
B0
(U.S.A. model)
1
MAIN ZONE z key
Turns on/off (standby) the unit.
2
Standby indicator
Lights up when the unit is in standby mode under any of
the following conditions.
• HDMI Control is enabled (p.130)
• Standby Through is enabled (p.131)
• Network Standby is enabled (p.133)
• Bluetooth Standby is enabled (p.136)
3
ZONE 2 key
Enables/disables the audio output to Zone2 (p.59).
4
ZONE CONTROL key
Changes the zone (main zone or the Zone2) that is
controlled by the keys and knobs on the front panel
(p.59).
5
INFO (WPS) key
Selects the information displayed on the front display
(p.62).
Enters the wireless LAN connection setup (WPS button
configuration) by holding down for a few seconds (
p.175).
6
MEMORY
key
Registers radio stations as preset stations (p.67).
Registers Bluetooth, USB, or network content as a shortcut
by holding down for a few seconds (p.
92
).
7
PRESET keys
Select a preset radio station (p.67).
Recall Bluetooth, USB, or network content that is registered
as a shortcut (
p.
93).
8
FM and AM keys (Except for U.K., Europe, Russia,
Middle East and Australia models)
FM and DAB keys (U.K., Europe, Russia, Middle East
and Australia models)
Switch between FM and AM (p.66) or FM and DAB
(p.71).
9
Front display
Displays information (p.14).
:
TUNING keys
Select the radio frequency (p.66).
A
Remote control sensor
Receives remote control signals (p.9).
B
PURE DIRECT key
Enables/disables the Pure Direct (p.53).
En
12