User Manual

Installing and Setting Up Speakers
Installing the speakers
n
When installing presence speakers
In addition to a standard 5.1-channel or 7.1-channel speaker system, install front and rear presence
speakers. To get the maximum effect from AURO-3D, it is recommended to install the presence speakers on
the walls in both the front and rear (according to the Auro Technologies company’s recommended setup).
However, AURO-3D can also be played if the speakers are installed on the ceiling or if Dolby Enabled
Speakers are used. The illustration shows a 7.1-channel system with the presence speakers installed.
Front presence speakers
Rear presence speakers
NOTE
(
AURO-3D can also be played even if only front presence speakers are installed.
(
Be sure to run YPAO whenever you have changed the speaker placement. For more information about YPAO, see the User Guide.
n
When presence speakers are not installed
In the case of a 2-channel to 7.1-channel speaker system, playback will be by Auro Surround with Auro-Matic
upmix.
Follow the instructions of “Selecting a Surround Decoder”(p.4) and “AURO-3D Decoder Settings”(p.4)
below.
3
Additional Information: AURO-3D > Installing and Setting Up Speakers