User Manual

Declaration of Conformity (UK)
1. Model number:
RX-A8A
2. Name and address of the manufacturer:
Yamaha Corporation
10-1 Nakazawa-cho, Chuo-ku, Hamamatsu-shi, Shizuoka-ken 430-8650, Japan
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the declaration:
AV Receiver
5. The object of the declaration described above is in conformity with:
Radio Equipment Regulations 2017
ErP Regulations 2019
RoHS Regulations 2012
PSTI Regulations 2023
6. References to the relevant harmonised standards and regulations used or references to the technical specifications in relation
to which conformity is declared:
Safety(article.6.1a)
EN 62368-1:2014; EN 62368-1:2014+A11:2017;
EN IEC 62311:2020; EN 62479:2010;
EMC(article.6.1b)
EN 55032:2015+A11:2020; EN 55035:2017+A11:2020;
EN 61000-3-3:2013+A1:2019+A2:2021; EN IEC 61000-3-2:2019+A1:2021;
EN 301 489-1 V2.2.3; EN 301 489-17 V3.2.4;
Radio(article.6.2)
EN 303 345-1 V1.1.1; EN 303 345-3 V1.1.1; EN 303 345-4 V1.1.1;
EN 300 328 V2.2.2; EN 301 893 V2.1.1; EN 300 440 V2.2.1;
ErP
ErP No 1275/2008:2013; ErP No 801/2013:2019;
RoHS
EN IEC 63000:2018;
7. Where applicable, notified body name and number, description of intervention and certificate:
Intertek Testing & Certification Limited (AB 0359) performed Chapter 1, clause 6-2 and issued the UK-type
examination certificate No. UK-RER-92
8. Where applicable, description of accessories and components, including software, which allow the radio equipment
to operate as intended:
WLAN/BT radio module: Radio Module Software: 905
10. Additional information:
(For Cybersecurity) Support period: Until 2027/12/31
Shizuoka
Place of issue
Date (YYYY/MM/DD) Yoshinori Yamamoto
General Manager
DocuSign Envelope ID: EA4BC1A0-7B46-4E6C-9BA3-2E195219CA1B
2024/02/16