User Manual
Table Of Contents
- 目錄
- 使用本機前
- 功能
- 部件名稱和功能
- 準備
- 享受聲音
- 播放
- 實用功能
- 在多個房間享受(區域)
- 配置
- 配置本機
- 配置各播放源的播放設定(Option選單)
- 配置各種功能(SETUP選單)
- SETUP選單的基本操作
- 設定選單項目
- 配置揚聲器設定
- 配置聲音設定
- 配置場景設定
- 配置視訊/HDMI設定
- 配置網絡設定
- 配置Bluetooth®設定
- 配置多區設定
- 配置系統設定
- 在本機上查看系統資訊
- 設定選單語言
- 將音訊輸入插孔與HDMI輸入插孔組合
- 設定用於電視音訊的音訊輸入插孔
- 設定在操作INPUT鍵要略過的輸入源
- 自動設定輸入源名稱
- 手動設定輸入源名稱
- 設定自動播放功能的用途
- 設定在操作PROGRAM鍵時要略過的聲音程式
- 更改FM/AM調諧頻率設定
- 設定遙控器上的PROGRAM鍵的功能
- 設定遙控器上的顏色鍵的功能
- 調整前方顯示螢幕的亮度
- 設定音量顯示比例
- 設定電視上短訊的用途
- 設定簡訊的位置
- 設定待用作電視上的壁紙的影像
- 設定操作音
- 指定TRIGGER OUT插孔工作的條件
- 指定每個輸入傳輸的電子訊號的輸出電平
- 手動切換電子訊號傳輸的輸出電平
- 指定TRIGGER OUT插孔功能與其同步的區
- 設定自動待機功能的時間量
- 設定eco模式的用途
- 防止無意中對設定進行更改
- 恢復至原廠設定
- 備份和恢復所有設定
- 更新韌體
- 透過操作機體前面板(前方顯示螢幕選單)來配置本機的設定
- 更新
- 故障排除
- 附錄
來自YPAO的錯誤訊息
如果顯示任何錯誤訊息,請按照螢幕說明解決問題,然後再次執行YPAO。
[搜尋標籤]#Q03 YPAO 錯誤
錯誤訊息 解決措施
ERROR 1
Front speakers are not
detected.
退出YPAO,關閉本機,然後檢查揚聲器連接。
ERROR 2
One of the surround speakers
cannot be detected.
ERROR 3
One of the front presence
speakers cannot be detected.
ERROR 4
One of the surround back
speakers cannot be detected.
ERROR 5
The noise is too loud.
保持房間安靜,然後重新嘗試YPAO。如果選擇“Proceed”,則YPAO會再
次進行測量並忽略檢測到的任何雜訊。
ERROR 6
Surround back speakers are
connected, but no surround
speakers are connected.
需連接環繞聲揚聲器,才能使用後置環繞聲揚聲器。退出YPAO,關閉本
機,然後重新連接揚聲器。
ERROR 7
The YPAO microphone has
been removed.
將YPAO麥克風牢固地連接至YPAO插孔,然後重新嘗試YPAO。
ERROR 8
The YPAO microphone cannot
detect test tones.
將YPAO麥克風牢固地連接至YPAO插孔,然後重新嘗試YPAO。如果此錯誤
重複發生,請聯繫離您最近的Yamaha授權經銷商或服務中心。
ERROR 9
Canceled by user operation
根據需要重新嘗試或退出YPAO。
ERROR 10
An internal error has occurred.
退出YPAO,然後關閉本機再打開。如果此錯誤重複發生,請聯繫離您最近
的Yamaha授權經銷商或服務中心。
ERROR 11
One of the rear presence
speakers cannot be detected.
退出YPAO,關閉本機,然後檢查揚聲器連接。
註
(
若要退出YPAO測量以解決問題,請選擇 “Quit”。
(
僅針對ERROR 5和ERROR 9訊息,您可繼續當前YPAO測量。選擇 “Proceed”。
(
若要從頭開始重試YPAO測量,請選擇 “Retry”。
129
準備 > 配置揚聲器設定