Owner’s Manual

En 104
Network
Network Connection Selects the network connection method. 112
IP Address Configures the network parameters (such as IP address). 113
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 113
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 113
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 114
Bluetooth
Bluetooth Enables/disables the Bluetooth functions. 114
Audio Receive Disconnect Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. 66
Bluetooth Standby Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). 114
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the TV screen. 115
Zone2 Set
Max Volume Sets the Zone2 maximum volume to prevent excessive loudness in the second zone. 115
Initial Volume Sets the Zone2 initial volume for when the unit is turned on. 115
Zone Rename Changes the zone name (for Zone2) displayed on the TV screen. 115
Party Mode Set Enables/disables switching to the party mode. 115
Function
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 116
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 116
Wallpaper Selects the image to be used as wallpaper on the TV. 116
Trigger Output
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 116
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 117
Memory Guard Prevents accidental changes to the settings. 117
ECO
Auto Power Standby Sets the amount of time for the auto-standby function. 117
ECO Mode Enables/disables the eco mode (power saving mode). 117
Language Select an on-screen menu language. 118
Menu Item Function Page