Owner’s Manual
En 9
Front panel
1 ZONE key
Enables/disables the audio output to Zone2 (p.85).
2 INFO (WPS) key
Selects the information displayed on the front display (p.91).
Enters the wireless network connection setup (WPS push
button configuration) by holding down for 3 seconds (p.40).
3 Remote control sensor
Receives remote control signals (p.5).
4 Front display
Displays information (p.10).
5 PURE DIRECT key
Enables/disables Pure Direct (p.53).
6 INPUT knob
Select an input source.
7 z (power) key
Turns on/off (standby) the unit.
8 Standby indicator
Lights up when the unit is in standby mode under any of the
following conditions.
• HDMI Control is enabled (p.111)
• Standby Through is enabled (p.112)
• Network Standby is enabled (p.113)
• An iPod is being charged (p.67)
9 PHONES jack
For connecting headphones.
0 YPAO MIC jack
For connecting the supplied YPAO microphone (p.32).
A STRAIGHT key
Enables/disables the straight decode mode (p.52).
B PROGRAM keys
Select a sound program or a surround decoder (p.48).
C SCENE keys
Select the registered input source, sound program, and
various settings with one touch. Also, turns on the unit when
it is in standby mode (p.47).
D AUX (AUDIO) jack
For connecting devices, such as portable audio players
(p.26).
E USB jack
For connecting a USB storage device (p.70) or an iPod
(p.67).
F VOLUME knob
Adjusts the volume.
Part names and functions
INFO (WPS)
PURE DIRECT
V
O
L
U
M
E
ZONE
INPUT
PHONES
SILENT CINEMA
YPAO MIC
STRAIGHT
(
CONNECT
)
BD/DVD
TV NET RADIO
AUX
SCENE
AUDI O
PROGRA
M
5V
1A
23 4 51
6
F9
7 D E: AB8C
(RX-AS710 Europe model)