Operation Manual

23
BASIC SETUP
PREPARATION
English
7 Press d to display the SPEAKERS
parameter.
8 Press j / i to select the number of speakers
you connected.
9 Press d to display SET/CANCEL.
10 Press j / i to select the desired setting.
>SET CANCEL
SET To apply the settings you chose in steps
4 through 8.
CANCEL To cancel the setup without making
any changes.
11 Press ENTER to confirm your selection.
If you selected SET, you hear a test tone from each
speaker in turn. “CHECK:TestTone” appears in
the front panel display for a few seconds, then
“CHECK: OK?”.
CHECK:TestTone
CHECK: OK? YES
12 Press j / i to select the desired setting.
CHECK: OK? YES
YES To complete the setup process if the test tone
levels from each speaker were satisfactory.
NO To proceed to the SPEAKER LEVEL speaker
level adjustment menu to balance the level of
each speaker.
13 Press ENTER to confirm your selection.
If you selected NO in step 12, the front speaker level
adjustment display appears in the front panel display.
Choices Display Speakers
2spk
Front L/R
3spk
Front L/R, Center
4spk
Front L/R, Surround L/R
5spk
Front L/R, Center, Surround L/R
6spk
Front L/R, Center, Surround L/R,
Surround back
PRESET/CH
ENTER
A/B/C/D/EA/B/C/D/E
SPEAKERS
..
6spk
LL C R
SL SB SR
LL C R
SL SB SR
LL CR
SL SB SR
LL C R
SL SB SR
LL C R
SL SB
SB
SR
LL C R
SL SB SR
PRESET/CH
ENTER
A/B/C/D/EA/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/EA/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/EA/B/C/D/E