Operation Manual

58
SET MENU
4 OPTION MENU
Use to adjust the optional system parameters.
Use the remote control to access and adjust each
parameter.
y
You can change SET MENU parameters while the unit is
reproducing sound.
1 Press AMP.
2 Press SET MENU.
“BASIC SETUP” appears in the front panel display.
3 Press u / d to display MANUAL SETUP.
MANUAL SETUP
4 Press ENTER to enter MANUAL SETUP.
1 SOUND MENU appears in the front panel display.
1 SOUND MENU
5 Press u / d to display the desired menu.
6 Press ENTER to enter the displayed menu.
Repeat steps 5 and 6 to navigate to and enter the
items you want to adjust.
To return to the previous menu level, press RETURN.
7 Press u / d and ENTER to select the
submenu, then press u / d to select the item
and j / i to change the parameter.
Repeat this operation to select and adjust each setting.
To return to the previous menu level, press RETURN.
8 To exit, press SET MENU when finished.
Item Features Page
A)DISPLAY SET
Adjusts the brightness of the display.
63
B)MEMORY GUARD
Locks sound field program parameters and other SET MENU settings.
63
C)PARAM. INI
Initializes the parameters of a group of sound field programs.
63
D)MULTI ZONE
Specifies the location of the speakers connected to the SPEAKERS B terminals.
63
Using SET MENU
AMP
MUTE
MENUTITLE
VOLUME
FREQ/TEXT EON
START
SET MENU
SRCH MODE
LEVEL
BAND
MEMORY
A/B/C/D/EA/B/C/D/E
MODE PTY SEEK
PRESET/CH
STRAIGHT
MOVIEENTERTAINMUSIC
STEREO
4321
8
10
7
09
65
ENT.
DIRECT ST.EXTD SUR.STANDARD SELECT
NIGHT B SPEAKERS A
DISPLAYRETURN
TV MUTE TV INPUT
TV VOL TV CH
ENTER
2,8
1
3-7
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
1 SOUND MENU
2 INPUT MENU
3 DAB MENU
4 OPTION MENU