Owner's Manual

65
ADVANCED SETUP MENU
ADVANCED
OPERATION
English
ADVANCED SETUP menu items
Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening
environment.
Speaker impedance SP IMP.
Use to switch the speaker impedance for this unit.
Choices: 8 MIN, 4 MIN
•Select 8 MIN to set the speaker impedance to 8 .
•Select 4 MIN to set the speaker impedance to 4 .
Factory presets PRESET
Use to reset all parameters to the factory presets (see
page 78).
Choices: CANCEL, RESET
Select CANCEL if you do not want this unit’s
parameters to be initialized when you reset the factory
presets.
Select RESET if you want all of this unit’s parameters
to be initialized when you reset the factory presets.
This setting does not affect ADVANCED SETUP menu item
parameters.
SP IMP. Speaker Impedance level
4 Ω ΜΙΝ
Front
If you use one set (A or B),
the impedance of each
speaker must be 4 or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 8 or
higher.
Center
The impedance of each
speaker must be 6 or
higher.
Surround
Surround back
8 Ω ΜΙΝ
Front
If you use one set (A or B),
the impedance of each
speaker must be 8 or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 16 or
higher.
Center
The impedance of each
speaker must be 8 or
higher.
Surround
Surround back
Note