00_RX-V1065_U_cv.fm Page 1 Tuesday, March 24, 2009 4:11 PM U RX-V1065 AV Receiver OWNER’S MANUAL © 2009 Yamaha Corporation All rights reserved. Black process 45.0° 240.
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.
Contents INTRODUCTION Front panel ................................................................. 4 Rear panel .................................................................. 5 Front panel display..................................................... 6 Remote control........................................................... 7 Quick start guide..................................................... 8 L Connecting the SiriusConnect™ tuner ....................
INTRODUCTION Features ■ Built-in 7-channel power amplifier • Minimum RMS Output Power (20 Hz to 20 kHz, 0.08% THD, 8 Ω) • FRONT L/R: 105 W + 105 W • CENTER: 105 W • SURROUND L/R: 105 W + 105 W • SURROUND BACK L/R: 105 W + 105 W ■ Speaker/Preout outputs • Speaker terminals (7-channel), extra speaker terminals (2-channel for presence or Zone2), preout jacks (7.
About this manual PREPARATION Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories “HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered trademarks of HDMI Licensing LLC. x.v.Color “x.v.Color” is a trademark of Sony Corporation. iPod™ “SILENT CINEMA” is a trademark of Yamaha Corporation. SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc.
Part names and functions Front panel A BC D E F G H I J HDMI THROUGH VOLUME ZONE2 CONTROL ZONE2 ON/OFF INFO l MEMORY PRESET FM l h AM CATEGORY l h TUNING/CH h SCENE BD/DVD TV RADIO CD INPUT PROGRAM MAIN ZONE PHONES TONE CONTROL PURE DIRECT STRAIGHT VIDEO AUX OPTIMIZER MIC USB ON/OFF EFFECT SILENT CINEMA K A L M N O ZONE2 ON/OFF P Q M Switches the zone function on and off (page 62).
Part names and functions Rear panel b SIRIUS DOCK c d e f XM HDMI OUT g HDMI 2 HDMI 1 HDMI 4 HDMI 3 h i INTRODUCTION a ANTENNA (BD/DVD) HD Radio GND FM AM UNBAL. EXTRA SP ZONE2/PRESENCE PHONO SPEAKERS MONITOR OUT COMPONENT VIDEO COMPONENT VIDEO SINGLE CLASS 2 WIRING REMOTE PR IN GND PREPARATION PR OUT PB VIDEO PB VIDEO Y Y 12V 0.1A MAX.
Part names and functions Front panel display ab c SIRIUS XM d e f g h i HD TAG j k SLEEP ZONE 2 STEREO 3 TUNED l VOL. MUTE SW PL PR C L R SL SR SBL SB SBR m a b n HDMI indicator i ZONE2 indicator Lights up during normal communication when HDMI is selected as an input source. j SLEEP indicator k MUTE indicator Lights up when a SiriusConnect tuner is selected as an input source.
Part names and functions Remote control n a ZONE2 b POWER SOURCE c FM/AM (CATEGORY l / h) CODE SET TRANSMIT POWER SLEEP o p MEMORY PRESET k / n TUN./CH k / n HDMI 2 3 4 1 2 3 4 5 6 1 2 V-AUX PHONO USB DOCK TUNER SIRIUS XM MULTI g Sound selection keys PRESET TUN./CH h SCENE q f AUDIO f Selects sound field programs (page 25). INFO MEMORY MOVIE MUSIC Switches between linked sets of input sources and sound field programs (page 22). ENHANCER SUR.
Quick start guide When you use this product for the first time, perform setup following the steps below. See the related pages for details on operations and settings. Step 1: Prepare items for setup Step 2: Set up your speakers Prepare speakers, DVD player, cables, and other items necessary for setup. For example, prepare the following items for setting up a 7.1-channel sound system. Front right speaker Video monitor • Placing speakers • Connecting speakers ☞P. 10 ☞P.
PREPARATION Preparing remote control 1 Using the remote control The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation. 3 Remote control sensor window PREPARATION 2 within 6 m (20 ft) 2 Insert the two supplied batteries (AAA, R03, UM-4) according to the polarity markings (+ and –) on the inside of the battery compartment. Snap the battery compartment cover back into place.
Connections Placing speakers This unit supports up to 7.1-channel surround. We recommended the following speaker layout in order to obtain the optimum surround effect. 7.1-channel speaker layout Speaker channels C FR FL SW SW 30˚ SL SR 60˚ 80˚ SL SR SBL SBR 30 cm (12 in) or more 6.1-channel speaker layout C FR FL SW SW SR 60˚ SL 80˚ SR SB 5.
Connections 0.5 to 1 m (1 to 3 ft) 0.5 to 1 m (1 to 3 ft) PL PR FL FR 1.8 m (6 ft) 1.8 m (6 ft) C INTRODUCTION ■ Presence left and right speakers (PL and PR) The presence speakers supplement the sound from the front speakers with extra ambient effects produced by the sound field programs (page 25). We recommend that you use the presence speakers especially for the CINEMA DSP sound field programs.
Connections Caution • A speaker cable is a pair of insulated cables running side by side in general. One of the cables is colored differently or striped to indicate a polarity. Connect one end of the colored/striped cable to the “+” (red) terminal of this unit and the other end to that of your speaker, and connect one end of the other cable to the “–” (black) terminal of this unit and the other end to that of your speaker. • Before connecting the speakers, be sure to disconnect the power cable.
Connections Information on jacks and cable plugs ■ ■ Audio jacks Jack and cables Analog audio jacks (white) To transmit conventional analog stereo audio signals. Use stereo pin cables. Connect red plugs to red jacks (R) and white plugs to white jacks (L). (red) To transmit coaxial digital audio signals. Use pin cables for digital audio signals. (orange) HDMI jacks HDMI Description To transmit digital video and digital audio signals. Use HDMI cables.
Connections Connecting a TV monitor or projector According to the types of video input jacks available on your video monitor (such as a TV or projector), choose one of the connection methods as shown below. When you connect video players such as a DVD player to this unit with an HDMI connection, connect your video monitor to this unit with an HDMI connection. Note • Make sure that this unit and other components are unplugged from the AC wall outlets.
Connections Connecting other components Note • Make sure that this unit and other components are unplugged from the AC wall outlets. Audio input (PHONO) DOCK XM HDMI OUT HDMI 2 HDMI 1 HDMI 4 HDMI 3 (BD/DVD) HDMI input (HDMI 1-4) PHONO MONITOR OUT COMPONENT VIDEO COMPONENT VIDEO REMOTE PR PR IN GND PREPARATION SIRIUS Audio / video output (AV OUT) INTRODUCTION This unit has input and output terminals for respective input and output sources.
Connections ■ Audio player Output jacks on the connected external component External component Input sources/jacks of this unit Output jack External component with optical digital output Optical digital output External component with coaxial digital output Coaxial digital output External component with analog audio output Analog audio output Turntable Input source Analog audio output Input jack AV 1 (TV) OPTICAL AV 4 OPTICAL AV 2 COAXIAL AV 3 (CD) COAXIAL AV 5 Analog audio AV 6 Ana
Connections HDMI 2 HDMI 1 Connecting a USB storage device Connect a USB memory device or USB portable audio player to the USB port on the front panel of this unit. For information about USB storage devices supported by this unit, see page 45.
Connections Connecting the FM and AM antennas An indoor FM antenna and an AM loop antenna are supplied with this unit. Connect these antennas properly to the respective jacks. Indoor FM antenna Outdoor AM antenna Connect a 5 to 10 m (16 to 33 ft) vinyl-covered wire, and extend it outdoors (use the AM loop antenna together with this antenna). Connecting the power cable After all connections are complete, plug the power cable of this unit into an AC wall outlet.
Optimizing the speaker setting for your listening room (YPAO) 2 Connect the supplied optimizer microphone to the SOPTIMIZER MIC jack on the front panel. INPUT VIDEO AUX OPTIMIZER MIC VIDEO USB PREPARATION Caution • Be advised that it is normal for loud test tones to be output during the “Auto Setup” procedure. Do not allow small children to enter the room during the procedure. • To achieve the best results, make sure the room is as quiet as possible while the “Auto Setup” procedure is in progress.
Optimizing the speaker setting for your listening room (YPAO) 4 5 When measurement is successfully completed, “YPAO Complete” appears on the front panel display and the measurement result appears on the GUI screen. When the speakers are connected to EXTRA SP terminals, press jCursor k repeatedly to select “Extra Speaker Assignment” and then press jCursor l / h to select how to use EXTRA SP terminals from “Zone2”, “Presence” or “None”.
Optimizing the speaker setting for your listening room (YPAO) When an error message is displayed during measurement INTRODUCTION If an error is detected during measurement, the measurement is canceled and “Error” appears on the GUI screen. Check the error and solve the problem. For details on each error message, see page 75. Press jCursor n once, press jCursor l / h to select “Retry” or “Exit” and then press jENTER. PREPARATION Error E-1 : No Front Speakers FrontL/R channel signals are not detected.
BASIC OPERATION Playback 4 Basic procedure 1 2 Turn on external components (TV, DVD player, etc.) connected to this unit. Rotate the RINPUT selector (or press dInput selection key) to select an input source. The name of the selected input source is displayed for a few seconds. Input source name VOL. AV1 y • You can also select an input source from the GUI screen (page 23). • You can change the input source name displayed on the front panel display or GUI screen as necessary (page 60).
Playback Registering input source/sound field program y • If you change the input source setting, register the remote control code of an external component to the input source (page 63). 1 Register the remote control code of an external component to the desired input source (page 63). Note • This feature is not available for TUNER, SIRIUS and XM input sources. While holding down the desired hSCENE key, press and hold the dInput selection key to which you registered a remote control code in step 1.
Playback Press QPURE DIRECT (or gPURE DIRECT) to turn the Pure Direct mode on or off. QPURE DIRECT lights up when you set Pure Direct mode on. The following features are disabled in the Pure Direct mode. – sound field program, tone control – display and operation of the Option menu and Setup menu – multi-zone function Changing information on the front panel display Press DINFO (or fINFO) repeatedly. Available information differs depending on the selected input source.
Enjoying the sound field programs This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel sounds for almost all input sources using various sound field programs stored on the chip and a variety of surround decoders. INTRODUCTION Selecting sound field programs ■ Selecting a sound field program on the front panel Rotate the NPROGRAM selector to select a desired sound field program.
Enjoying the sound field programs Program Descriptions Drama This sound field features stable reverberations that match a wide range of movie genres from serious dramas to musicals and comedies. The reverberations are modest but offer an optimum 3D feeling, reproducing effects tones and background music softly but cubically around clear words and center positioning in a way that does not fatigue the listener even after long hours of viewing.
Enjoying the sound field programs For multi-channel stereo reproduction (STEREO) Program Use this program to output sound from all speakers. When you play back multi-channel sources, this unit downmixes the source to 2 channels and then outputs the sound from all speakers. This program creates a larger sound field and is ideal for background music at parties, etc.
Enjoying the sound field programs Enjoying unprocessed input sources (Straight decode mode) In straight decode mode, sounds are reproduced without sound field effect. 2-channel stereo sources are output from only the front left and right speakers. Multi-channel input sources are decoded straight into the appropriate channels and multi-channel sounds are reproduced without a sound field effect. 1 2 To enable straight decode mode, press OSTRAIGHT (or gSTRAIGHT).
FM/AM tuning The FM/AM tuner of this unit provides the following two modes for tuning. ■ Preset tuning mode You can preset the frequencies of FM/AM stations by registering them to specific numbers, and later just select those numbers to tune in. • You can switch between stereo and monaural for FM broadcast in the Option menu (page 48). • (U.S.A. model only) When tuning in to an HD Radio station, the HD indicator lights up. See page 31 for details about the HD Radio features.
FM/AM tuning y • You can select the preset number at which the preset starts by pressing ePRESET k / n or jCursor k / n while “READY” is displayed on the front panel display. • To cancel registration, press jRETURN. 4 y Status • To cancel registration, press jRETURN or leave this unit without any operations for about 30 seconds. 01:FM 87.5 MHz Preset number Frequency During the automatic station preset, “MEMORY” appears in the front panel display each time a station is registered.
Using HD Radio™ features (U.S.A. model only) Notes Selecting HD Radio™ audio programs ■ HD WXYZ-FM When multiple audio programs are provided Audio program number (relative/total) Lights up Audio program number (absolute) BASIC OPERATION The HD indicator lights up in the front panel display when this unit is tuned into an HD Radio reception band. In this state, you can select the desired audio program if the selected FM HD Radio station provides multiple audio programs (up to 8).
Using HD Radio™ features (U.S.A. model only) y • This unit transmits the “tag” data to the iPod if an iPod that supports iTunes Tagging feature is stationed in the Yamaha iPod universal dock (YDS-11, sold separately) connected to the DOCK terminal of this unit. Otherwise, this unit stores the “tag” data (up to 50) in the internal memory and will transmit it next time your iPod is stationed.
XM® Satellite Radio tuning (U.S.A. model only) Satellite Radio delivers a variety of commercial-free music from categories ranging from Pop, Rock, Country, R&B, Dance, Jazz, Classical and many more plus coverage of all the top professional and college sports including play by play games from select leagues and teams. Additional programming includes expert sports talk, uncensored entertainment, comedy, family programming, local traffic and weather and news from your most trusted sources.
XM® Satellite Radio tuning (U.S.A. model only) XM Satellite Radio® operations 1 ■ Category Search mode 1 Press GCATEGORY l / h (or eCATEGORY l / h) to select the channel category. “CAT” is displayed on the front panel display during the channel category selection. When you select the category, the first channel in the category is selected. Rotate the RINPUT selector (or press dXM) to select “XM” as the input source.
XM® Satellite Radio tuning (U.S.A. model only) Registering XM Satellite Radio channels Prior to selecting a preset channel in the Preset Search mode, you must preset XM channels. For details, see “Registering preset channels” on this page. Preset channel number XM Registering preset channels Search a channel you want to set as a preset channel in one of the XM Satellite Radio search modes. For details, see “XM Satellite Radio operations” (page 34).
XM® Satellite Radio tuning (U.S.A. model only) Displaying the XM Satellite Radio™ information Use this feature to display the XM Satellite Radio information on the front panel display or on the GUI screen. ■ GUI screen Press tDISPLAY on the remote control to turn on or off the information display. The following information is displayed on the GUI screen. Note d • If a status message or an error message appears on the front panel display or GUI screen, see “XM Satellite Radio” (page 70).
SIRIUS Satellite Radio™ tuning (U.S.A. model only) Connecting the SiriusConnect™ tuner SiriusConnect Tuner and the antenna (sold separately) Rotate the RINPUT selector (or press dSIRIUS) to select “SIRIUS” as the input source. 2 Press l0 and then lENT to display the Sirius ID of your SiriusConnect tuner. “000 Sirius ID” and “xxxxxxxxxxxx” (“xxxxxxxxxxxx” indicates the 12-digit Sirius ID of your SiriusConnect tuner) appears alternately on the front panel display. Write the Sirius ID below.
SIRIUS Satellite Radio™ tuning (U.S.A. model only) 2 Search for a channel by using one of the SIRIUS Satellite Radio search modes. • To select a channel from the all channel list, see “All Channel Search mode” on this page. • To select a channel by category, see “Category Search mode” on this page. • To select the desired channel directly by entering the channel number, see “Direct number access” on this page.
SIRIUS Satellite Radio™ tuning (U.S.A. model only) Registering SIRIUS Satellite Radio™ channels Prior to selecting a preset channel in the Preset Search mode, you must preset SIRIUS channels. For details, see “Registering preset channels” on this page. SIRIUS 001 Hits 1 Registering preset channels Search a channel you want to set as a preset channel in one of the SIRIUS Satellite Radio search modes. For details, see “SIRIUS Satellite Radio operations” (page 37). SIRIUS 2 Press EMEMORY (or eMEMORY).
SIRIUS Satellite Radio™ tuning (U.S.A. model only) Setting the Parental Lock 6 Press jCursor l / h to select the category of a channel you want to lock. You can use the Parental Lock feature to limit the access to the desired SIRIUS Satellite channels. This unit automatically skips the locked channels when this unit is in the All Channel Search mode or Category Search mode and you search a channel by pressing HTUNING/CH l / h (or eTUN./CH k / n).
SIRIUS Satellite Radio™ tuning (U.S.A. model only) Displaying the SIRIUS Satellite Radio™ information Note • If a status message or an error message appears on the front panel display or GUI screen, see “SIRIUS Satellite Radio” (page 72). ■ Front panel display Channel Antenna y • You can configure the scroll setting of the front panel display with “Front Panel Display Scroll” in the Setup menu (page 59).
Using iPod™ Once you have stationed your iPod in a Yamaha iPod universal dock (such as the YDS-11, sold separately) connected to the DOCK terminal on the rear panel of this unit (page 17), you can enjoy playback of your iPod using the supplied remote control or the menu displayed on the GUI screen. You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression artifacts (such as MP3 format) stored on your iPod (page 27).
Using iPod™ 4 Press jCursor k / n / l / h to select a menu item and then press jENTER to start playback. ■ 1 Press tDISPLAY to switch to menu browse mode while “DOCK” is selected as the input source. 2 Press rOPTION on the remote control. The Option menu for “iPod” is displayed (page 47). 3 Press jCursor k / n to select “Shuffle” or “Repeat” and then press jENTER. 4 Press jCursor l / h to select the desired playback style.
Using Bluetooth™ components You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component. You need to perform “Pairing” the connected Bluetooth wireless audio receiver and your Bluetooth component in advance.
Using USB storage devices Notes • You can play back only the files stored in the first partition. • Some files may not be playable depending on models and types of USB storage devices. Playback of the USB storage device ■ Play information display INTRODUCTION You can enjoy playback of WAV (PCM format only), MP3, WMA , MPEG-4 AAC and FLAC files stored on your USB memory device or USB portable player connected to the USB port on the front panel of this unit.
Other functions Using the sleep timer 3 Turn off the TV. Other HDMI control devices are also turned off in conjunction with the TV. If not, turn off them manually. 4 Turn on the TV. Other HDMI control devices are also turned on in conjunction with the TV. If not, turn on them manually. 5 Select this unit as the input source of the TV. 6 Turn on the HDMI control device (DVD player or Blu-ray player) connected to this unit.
ADVANCED OPERATION Setting the option menu for each input source (Option menu) 1 Press rOPTION on the remote control. The Option menu for the selected input source is displayed. For details about the Option menu items of each input source, see “Option menu items” on this page. Option menu items The following menu items are provided for each input source.
Setting the option menu for each input source (Option menu) Decoder Mode Input source: HDMI1-4, AV1-4 Choices: Auto*, DTS Selects DTS digital audio signals for reproduction. Auto DTS Automatically selects audio input signals. Selects DTS signals only. Other input signals are not reproduced.
Setting the option menu for each input source (Option menu) Shuffle Input source: iPod (DOCK), USB Choices: iPod (DOCK): Off*, Songs, Albums USB: Off*, On Repeat Input source: iPod (DOCK), USB Choices: Off*, One, All Changes the repeat playback style. Connect / Disconnect Connects to or disconnects from a Bluetooth component. Pairing Input source: BLUETOOTH (DOCK) Rotate the RINPUT selector (or press dMULTI) to select “MULTI CH” as the input source. 2 Press rOPTION on the remote control.
Editing surround decoders/sound field programs Setting sound field parameters Although the field sound programs would satisfy you as they are with the default parameters, you can arrange sound effect or decoders suitable for acoustical conditions of sources or rooms by setting the parameters. Sound field parameters y • The default settings are marked with “*”. CINEMA DSP basic parameters y DSP Level • You cannot configure the parameters when “Memory Guard” is set to “On” (page 60).
Editing surround decoders/sound field programs Note Source sound • This setting is available only when “Extra Speaker Assignment” is set to “Presence” (page 56). Early ■ Parameters for adjusting early-reflected sound Level Level INTRODUCTION Sound field parameters for advanced configurations Time Time Sound source Initial Delay / P. Initial Delay / Sur. Initial Delay / Sur. Back Initial Delay Level Early-reflected sound Time Delay Time Delay Sound source ■ Large = 2.
Editing surround decoders/sound field programs Parameters for adjusting reverberant sound Reverb Level Adjustable range: 0 to100% Reverb Time Adjustable range: 1.0 to 5.0s Reverb Time parameter adjusts the attenuation time of the rear reverberant sound based on the time that about 1kHz reverberant sound takes for 60dB of attenuation. Reverberant sound attenuates faster as you decrease the value.
Editing surround decoders/sound field programs ■ Parameter for Straight Enhancer and 7ch Enhancer Effect Level High*, Low INTRODUCTION Choices: Adjusts the Compressed Music Enhancer effect level. When the high-frequency signals of the source is emphasized too much, set the effect level to “Low”. To reduce the effect, set this parameter to “Low”. Decoder parameters ■ PREPARATION You can customize decoder effects by setting the following parameters.
Operating various settings for this unit (Setup menu) You can call the Setup menu using the remote control and change the settings of various menus. For details, read “Basic operation of the Setup menu” first, and see the respective pages. Menu/Submenu Function Page Sets items for speakers. 55 Auto Setup (YPAO) Automatically adjusts output characteristics of speakers. 55 Manual Setup Speaker Setup Manually adjusts output characteristics of speakers.
Operating various settings for this unit (Setup menu) Menu/Submenu Function Page DSP Parameter Sets parameters for the sound field programs. 60 Memory Guard Protects some settings against accidental alteration. 60 5 The Setup menu screen appears on both the GUI screen and front panel display. GUI screen PREPARATION Setup Menu Press jCursor k / n to select an item to edit and then press jCursor l / h to change the setting. Some items in “Manual Setup” of “Speaker Setup” take up a full screen.
Operating various settings for this unit (Setup menu) y Note • The speaker configuration includes items for defining a speaker size: “Large” or “Small”. “Large” and “Small” refer to speakers with woofer diameters 16 cm or larger and smaller than 16 cm, respectively. • If “LFE / Bass Out” is set to “Front”, “Front Speaker” automatically switches to “Large” even when it is set to “Small”.
Operating various settings for this unit (Setup menu) Bass Crossover Frequency Choices: 40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz Subwoofer Phase Normal*, Reverse Sets the phase of your subwoofer if bass sounds are lacking or unclear. Normal Reverse Speaker Level Adjustable range: –10.0dB to +10.0dB (0.5dB step) Defaults: 0dB (FR.L, FR.R, SWFR, PR.L, PR.R) –1.0dB (CNTR, SUR.L, SUR.
Operating various settings for this unit (Setup menu) Max Outputs sound without adjusting the dynamic range of the input signals. ■ Lipsync Adjusts delay between video output and audio output. HDMI Auto Lipsync Choices: Off*, On Automatically adjusts output timing of audio and video signals when a TV that supports an automatic lip-sync function is connected to this unit.
Operating various settings for this unit (Setup menu) Through*, 16:9, Smart Zoom Through ■ Adaptive DRC Choices: Notes You can set items for a video monitor and the front panel display. Auto Off Auto Input level Volume : low Auto Off Off Input level Volume : high Adjusts the dynamic range automatically. Not adjust the dynamic range automatically. y BASIC OPERATION • You cannot change the aspect ratio of the screen when “Resolution” is set to “Through”.
Operating various settings for this unit (Setup menu) Input Rename DSP Parameter Changes input source names to be displayed on the front panel display. Selecting a name to be displayed from templates Press jCursor k / n to select the input source name to edit and then press jCursor l / h to select a new name from the following templates.
Using multi-zone configuration Only analog signal can be sent to the second zone. If you want to output sounds to Zone2, connect an external component to the AV5-6, AUDIO1-2 or VIDEO AUX (AUDIO) jacks (by analog connection). For example, if you want to output sound from an HDMI DVD player to the second zone, you must connect the HDMI DVD player to this unit by both HDMI and analog connections.
Using multi-zone configuration Controlling Zone2 You can select and control Zone2 by using the control keys on the front panel or on the remote control. The available operations are as follows: • Selecting the input source. • Tuning into the desired station (when “TUNER” is selected as the input source) • Tuning into the desired channel (when “XM” or “SIRIUS” is selected as the input source) (U.S.A. model only) • Adjusting the volume of Zone2 (when Zone2 speakers are connected to the EXTRA SP terminals).
Controlling other components with the remote control You can control external components for a selected input source with the remote control. The keys available for controlling external components are as follows: Input source jCursor, ENTER, RETURN Operates the menus of external components. kExternal component operation keys Function as a recording or playback key of an external component, or a menu display key.
Advanced setup In the advanced setup menu, you can set basic operations of this unit, such as on and off of a bi-amp connection, or initialize user settings. 1 Set this unit to standby. 2 While holding down OSTRAIGHT on the front panel, press KMAIN ZONE ON/OFF. Keep holding down OSTRAIGHT until “ADVANCED SETUP” appears on the front panel display. ADVANCED SETUP 3 Rotate the NPROGRAM selector to select the parameter you want to change. The default setting are marked with “*”.
Advanced setup 3 INTRODUCTION Enter the desired remote control ID code. To switch to ID1: Press lNumeric keys to enter “5019”. To switch to ID2: Press lNumeric keys to enter “5020”. Once the remote control code is registered, nTRANSMIT blinks twice. If it fails, nTRANSMIT blinks six times. Repeat from step 1. y PREPARATION • If you initialize the settings of this unit, “REMOTE ID” (remote control code of this unit) is set to “ID1”.
APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Problem See page Cause Remedy This unit does not operate properly.
Troubleshooting Problem Cause Remedy See page No appropriate input source has been selected. Rotate the RINPUT selector (or press dInput selection key) to select the desired input source. 22 Speaker connections are not secure. Secure the connections. 11 The volume is turned down or muted. Turn up the volume. 22 Signals this unit cannot reproduce are being input from a source component, such as a CD-ROM. Display “Signal Info” in the Option menu and check the input signal format.
Troubleshooting Problem No sound is heard from the subwoofer. Cause Remedy See page “LFE / Bass Out” is set to “Front” and a Dolby Digital, DTS or AAC signals is being played. Set “LFE / Bass Out” to “Subwoofer” or “Both”. 56 “LFE / Bass Out” is set to “Subwoofer” or “Front” and a 2-channel source is being played. Set “LFE / Bass Out” to “Both”. 56 The source does not contain low frequency signals. No sound is heard from the surround back speakers.
Troubleshooting HDMI™ No picture or sound. Cause Remedy See page The number of the connected HDMI components is over the limit. Disconnect some of the HDMI components. — The connected HDMI component does not support high-bandwidth digital copyright protection (HDCP). Connect an HDMI component that supports HDCP. 81 Problem Cause FM stereo reception is noisy. Check the antenna connections. 18 Replace the outdoor antenna with a more sensitive multi-element antenna.
Troubleshooting Problem Cause This unit cannot select other audio programs than the main program. The radio station provides one audio program only. HD Radio information does not appear. The radio station does not provide the information. Remedy See page Remedy See page iTunes Tagging (U.S.A. model only) Problem Tag data cannot be transferred to your iPod when it is station in the Yamaha iPod universal dock (YDS10). Status message Cause “YDS-10” does not support tag file transfer.
Troubleshooting Status message Cause Remedy See page The XM Mini-Tuner is acquiring audio or program information from the XM satellite signal. This message can also occur in weak XM signal conditions. Note that this unit may not respond to some operations while this message is displayed. This message should disappear in a few seconds in good signal conditions. If you see this message often, reposition the XM antenna to get better signal reception.
Troubleshooting SIRIUS Satellite Radio (U.S.A. model only) If an operation takes longer than usual or an error occurs, one of the following messages may appear on the GUI screen. In this case, read the cause and follow the corresponding remedies. Status message Cause Remedy See page ANTENNA ERROR The antenna is not connected to the SiriusConnect tuner properly. Check the connection of the antenna and SiriusConnect tuner. 37 SIRIUS LOADING This unit is communicating with the SiriusConnect tuner.
Troubleshooting Remote control The remote control does not work or function properly. Cause Remedy See page Direct sunlight or lighting (from an inverter type of fluorescent lamp, strobe light, etc.) is striking the remote control sensor of this unit. Adjust the lighting angle or reposition this unit. — The batteries are weak. Replace all batteries. 9 The remote control ID of the remote control and this unit do not match. Match the remote control ID of this unit and the remote control.
Troubleshooting Status message Cause Disconnected Your iPod is removed from the Yamaha iPod universal dock. Unable to play This unit cannot play back the songs currently stored on your iPod. Remedy See page 42 Check that the songs currently stored on your iPod are playable. — Bluetooth™ Status message Searching... Cause Remedy See page The Bluetooth wireless audio receiver and the Bluetooth component are in the middle of the pairing.
Troubleshooting Status message Cause Remedy See page USB Connected Your USB storage device is connected. Disconnected Your USB storage device has been disconnected from the USB port of this unit. Check the connection between this unit and your USB storage device. — This unit recognizes the USB storage device as an illegal device. Turn this unit off and then turn on again. 18 This unit cannot access your USB storage device. Try another USB storage device.
Troubleshooting Error message Cause Remedy See page E-7:NO MIC The optimizer microphone was unplugged during the “Auto Setup” procedure. Do not touch the optimizer microphone during “Auto Setup”. 19 E-8:NO SIGNAL The optimizer microphone does not detect test tones. Check whether the microphone is properly placed. 19 Check whether the speakers are properly placed and connected. 10, 11 The optimizer microphone or OPTIMIZER MIC jack may be defective.
Glossary ■ Audio and video synchronization (lip sync) ■ Dolby Digital Surround EX Dolby Digital EX creates 6 full-bandwidth output channels from 5.1channel sources. For the best results, Dolby Digital EX should be used with movie sound tracks recorded with Dolby Digital Surround EX. With this additional channel, you can experience more dynamic and realistic moving sound especially with scenes with “fly-over” and “flyaround” effects.
Glossary ■ DSD Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using DSD, signals are stored as single bit values at a high-frequency sampling rate of 2.8224 MHz, while noise shaping and oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals. Due to the high sampling rate, better audio quality can be achieved than that offered by the PCM format used for normal audio CDs.
Glossary ■ “x.v.Color” INTRODUCTION A color space standard supported by HDMI version 1.3. It is a more extensive color space than sRGB, and allows the expression of colors that could not be expressed before. While remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color space and can thus produce more vivid, natural images. It is particularly effective for still pictures and computer graphics.
Sound field program information ■ Elements of a sound field What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room. In addition to making the sound live, these reflections enable us to tell where the player is situated as well as the size and shape of the room in which we are sitting.
Information on HDMI™ ■ HDMI signal compatibility Audio signals Audio signal formats INTRODUCTION Audio signal types Compatible media 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SA-CD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc.
Specifications AUDIO SECTION VIDEO SECTION • Minimum RMS Output Power for Front, Center, Surround, Surround back 20 Hz to 20 kHz, 0.08% THD, 8 Ω...................................... 105 W • Dynamic Power (IHF) Front Speakers 8/6/4/2 Ω ................................ 140/175/205/250 W • Maximum Useful Output Power (JEITA) [General, China, Korea and Asia models] 1 kHz, 10% THD, 8 Ω .........................................................
Index ■ Numerics ■ A C ■ F FIRM UPDATE, advanced setup .................. 64 Firmware update ............................................ 64 FM antenna connection .................................. 18 FM tuning ...................................................... 29 FM/AM (CATEGORY l / h), front panel ................................................... 4 Frequency tuning ........................................... 29 Front left speaker ...........................................
Index Multi-zone configuration ............................... 61 Music Video, sound field program ................ 26 MUTE indicator, front panel display ............... 6 MUTE, remote control .................................... 7 ■ N Neo:6 Cinema, decoder ................................. 27 Neo:6 Music, decoder .................................... 27 Neural Sur., decoder ...................................... 27 Numeric key, remote control ...........................
Index INTRODUCTION PREPARATION BASIC OPERATION ADVANCED OPERATION APPENDIX English “KMAIN ZONE ON/OFF” or “pPOWER” (example) indicates the name of the parts on the front panel or the remote control. Refer to “Part names and functions” on page 4.
List of remote control codes TV A.R.
Fujitsu Siemens 0425, 0426, 0427, 0428, 0429 Funai 0033, 0034, 0035, 0036, 0037, 0097, 0104, 0105, 0225, 0259 Futuretech 0104, 0225 Galaxi 0269, 0274 Galaxis 0243, 0274 Gateway 0163, 0226, 0227 GBC 0261, 0266, 0273 GE 0069, 0071, 0072, 0073, 0077, 0090, 0099, 0102, 0106, 0112, 0131 Geant Casino 0275 GEC 0260, 0265, 0268, 0271, 0274, 0328 Geloso 0261, 0264, 0273 General Technic 0261, 0273 Genexxa 0262, 0265, 0268, 0274 GFM 0177, 0210 Giant 0328 Gibralter 0076, 0090, 0096, 0108 GoldHand 0327 Goldline 0274 Gol
Neckermann NEI Net-TV Neufunk New Tech New World NewTech Nicamagic Nikkai Nikko Nobliko Nokia Norcent Nordic Nordmende Nordvision Novatronic Oceanic Okano Olevia ONCEAS Onwa Opera Oppo Optimus Optoma Optonica Orbit Orion Orline Osaki Oso Otto Versand Pael Palladium Palsonic Panama Panasonic Panavision Pathe Cinema Pausa Penney Perdio Perfekt Philco Philharmonic Philips iii 0243, 0257, 0260, 0264, 0268, 0269, 0271, 0274, 0328 0268, 0271, 0274 0226 0273, 0274 0261, 0268 0262 0273, 0274, 0328 0260, 03
Sylvania Symphonic Syntax Syntax-Brillian Sysline Sytong Tandy Tashiko Tatung TCM Teac Tec Technics TechniSat Techwood TEDELEX Teknika Teleavia Telecor Telefunken Telegazi Telemeister Telesonic Telestar Teletech Teleton Televideon Televiso Tensai Tesmet Tevion Texet Thomson Thorn TMK TNCi Tokai Tokyo Tomashi Toshiba Totevision Towada Trakton Trans Continens Transtec Trident 0072, 0088, 0089, 0090, 0091, 0095, 0096, 0097, 0098, 0175, 0177, 0210 0097, 0104, 0108, 0133, 0210, 0225 0149 0149 0271 0327 022
iBUYPOWER Impego Imperial Inno Hit 1066 1076 1072 1075, 1076, 1078, 1079, 1090, 1091 Innovation 1074 Instant Replay 1022 Interbuy 1077, 1090 Interfunk 1078 Intervision 1072, 1091 Irradio 1077, 1079, 1090 ITT 1073 ITV 1075, 1077, 1091 JC Penney 1018, 1019, 1020, 1021, 1022 JCL 1022 JVC 1011, 1012, 1013, 1014, 1015, 1016, 1017, 1018, 1019, 1028, 1035, 1064, 1073, 1085, 1117, 1130, 1131, 1133, 1134, 1135, 1136 Kaisui 1079, 1090 Karcher 1078 Kendo 1074, 1075, 1076, 1090 Kenwood 1018, 1019, 1073 Kodak 1021, 102
ATACOM Audiovox Avious Awa Axion Bang & Olufsen Baze BBK Bellagio Best Buy Blaupunkt Blue Parade Boghe Brainwave Brandt Broksonic Bush 2318 2111, 2199 2317 2313 2171 2210 2317 2318 2313 2309 2209 2207 2300 2312 2198, 2238 2192, 2195 2018, 2060, 2248, 2264, 2301, 2308, 2317, 2350, 2368 California Audio Labs 2197 Cambridge Audio 2304 CAT 2306, 2307 CAVS 2146 Centrum 2307 CGV 2304, 2312 Changhong 2222 Cinetec 2313 CineVision 2191, 2215 Clatronic 2308, 2317 Coby 2077, 2124, 2314 Conia 2301 Continental Edison 2
Skyworth Slim Art SM Electronic Sonic Blue Sontech Sony 2310 2312 2305 2215 2316 2005, 2006, 2007, 2020, 2021, 2022, 2023, 2024, 2025, 2069, 2072, 2073, 2085, 2086, 2087, 2091, 2092, 2093, 2102, 2128, 2129, 2130, 2249, 2250, 2323, 2334, 2335, 2336, 2360, 2361, 2362, 2363, 2364, 2365, 2384 Soundmaster 2305 Soundmax 2305 Spectra 2313 Spectroniq 2155 Standard 2305 Star Cluster 2305 Starmedia 2308, 2318 Sungale 2158 Sunkai 2312 Superscan 2196 Supervision 2305 Sylvania 2094, 2180, 2189, 2196, 2219, 2224 Symphon
Viewmaster Vision Visiopass Vortex View Wittenberg Zenith Zentek 3045 3045 3051, 3054, 3055 3045 3048 3035, 3040, 3046 3044 Sattelite AB Sat AccessHD ADB AGS Akai Alba 4138, 4139 4058 4142 4138 4101, 4103 4083, 4084, 4085, 4086, 4108, 4139 Aldes 4085, 4087, 4088 Allsat 4098, 4101, 4103 Allsonic 4074, 4087, 4090 Alltech 4139 Alpha 4103 Alpha Digital 4058 Alphastar 4031 Amitronica 4139 Amstrad 4089, 4113, 4136, 4139 Anglo 4139 Ankaro 4074, 4087, 4090, 4139 Anttron 4083, 4086 Apollo 4083 Armstrong 4089, 410
Orbitech OSat Otto Versand Pace Pacific Packsat Palcom Palladium Palsat Panasat Panasonic Panda Pansat Patriot Paysat PCT Philco Philips Phoenix Phonotrend Pioneer Polsat Predki Premiere Priesner Primestar Profile Promax Prosat Proscan Protek Proton Provision Quadral Quelle Quiero RadioShack Radiola Radix Rainbow RCA Realistic Redpoint Redstar RFT Roadstar Roch Rover Saba Sabre Sagem Sakura Samsung SAT Sat Cruiser Sat Partner Sat Team ix 4083, 4134, 4135, 4136 4086 4093 4084, 4093, 4113, 4121, 4125, 4
00_RX-V1065_U_cv.fm Page 1 Tuesday, March 24, 2009 4:11 PM U RX-V1065 AV Receiver OWNER’S MANUAL © 2009 Yamaha Corporation All rights reserved. Black process 45.0° 240.
