Quick Reference Guide

ManualsBrandsYamaha ManualsAV receiversRX-V1067

within 6 m

- 1 -

English

for Asia*, Africa, Oceania

and Latin America

*Except for China and Korea

E.g. E.g.

Preparing the remote control

■

Accessories

■

Items necessary for connection

The following accessories are supplied with this product.

Speakers

External components

Remote control

Front speaker

E.g. E.g.

Batteries (2)

(AAA, R03, UM-4)

Center speaker

AM loop antenna

Surround speaker, surround back

speaker, and presence speaker

Indoor FM antenna

Active subwoofer

Power cable*

Take off the battery compartment cover.

Insert the two supplied AAA batteries

into the battery case, following the

polarity markings.

Snap the battery compartment cover

back into place.

Be sure to aim the remote control directly at the remote

control sensor on this unit during operation.

Cable

• Cables for connecting external components

(may differ depending on the components you are connecting)

• Speaker cables

(a quantity to match the number of speakers you are connecting)

• Audio pin cable

(for subwoofer)

Playback device such as BD

(Blu-ray Disc)/DVD players

• Use speakers with an impedance of at least 6Ω. 4Ω speakers can also be used as the front speakers. For more information on speaker

impedance, refer to page 3.

• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.

• Prepare at least two front speakers. The priority of the other speakers is as follows:

1 Two surround speakers

2 One center speaker

3 One (or two) surround back speaker(s)/presence speakers

YPAO microphone

* The  gure of the supplied power cable may differ depending upon regions.

Summary of content (8 pages)

PAGE 1
English for Asia*, Africa, Oceania and Latin America Quick Reference Guide ■ *Except for China and Korea Accessories The following accessories are supplied with this product. Batteries (2) (AAA, R03, UM-4) Remote control AM loop antenna Indoor FM antenna YPAO microphone Power cable* * The figure of the supplied power cable may differ depending upon regions. Preparing the remote control 1 3 Take off the battery compartment cover.
PAGE 2
Connect and install as follows the first time you use this unit. See the following explanations for the connections for each number. TV 3 2 BD/DVD player (recorder) 4 This unit Front speaker R Front speaker L Subwoofer Surround speaker R 1 Center speaker 6.1 Surround back speaker 1 Surround speaker L 7.1 7.1 Surround back speaker L Surround back speaker R 7.1 Connect when using with 7.1-channel speaker layout. Place the surround back speakers (L/R) 30 cm or more away from each other. 6.
PAGE 3
1 Connect the speakers Subwoofer Front speaker R L 7.1 Connect when using with 7.1-channel speaker layout. 6.1 Connect when using with 6.1-channel speaker layout. Caution: HDMI AV A 1 AV A 2 AV A 3 • Remove the power cable of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity.
PAGE 4
2 Connect a TV If your TV has multiple inputs, connect with the following priority (A to D).
PAGE 5
3 Connect playback devices such as BD/DVD players and recorders If your playback device has multiple audio/video outputs, connect with the following priority (A to D) to enjoy a higher quality sounds and images. A When the HDMI output is HDMI HDMI available. HDMI DOCK COMPONENT VIDEO B When the component video NETWORK HDMI OUT 2 1 PR output is available (with optical digital audio output).
PAGE 6
5 Set up the speaker parameters automatically (YPAO) When all connections are complete, adjust the configuration, sizes, and volume balance of the speakers to provide an optimal sound field. This unit is equipped with a Yamaha Parametric Room Acoustic Optimizer (YPAO) function that adjusts the speaker balance automatically with a simple procedure. Be aware of the following when using YPAO. • The amount of time for measurement varies from about two to ten minutes according to settings.
PAGE 7
5 Use the cursor B/C to select the “Measure” and press ENTER to start measurement. When “Multi Position” is set to “Yes” (default), the measurement of multiple positions will follow. Refer to “Setting up the speaker parameters automatically (YPAO)” for details on “Multi Position” in the Owner’s Manual.
PAGE 8
Basic operations A Switches this unit between on and standby mode MAIN ZONE 2 This unit switches between on and standby mode every time you press this key. CODE SET SOURCE RECEIVER AV B Selects an input source to listen to The name of the selected input source appears on the front panel display. AV1 A.