Owner's Manual

En 107
CONFIGURATIONS
Configuring various functions (Setup menu)
Perform the following basic procedure to operate the “Setup” menu. You can configure the
unit’s various functions with the “Setup” menu.
X
• If new firmware is available, the message screen appears.
• If new firmware is available, the envelope icon (p) appears at the lower of the “Setup” menu.
1
Press SETUP.
2
Use the cursor keys to select a menu and press ENTER.
3
Use the cursor keys to select an item and press ENTER.
4
Use the cursor keys to select a setting.
5
Press SETUP.
This completes the settings.