Owner's Manual

En 109
Sound
Information Displays information about the current audio signal. 116
Lipsync
Delay Enable Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select” in the “Setup” menu. 116
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 116
Adjustment Adjusts the delay between video and audio output manually. 117
DSP Parameter
DSP Level Adjusts the sound field effect level. 117
Initial Delay Adjusts the delay between the direct sound and presence sound field generation. 117
Room Size Adjusts the broadening effect of the presence sound field. 117
Liveness Adjusts the loss of the presence sound field. 117
Reverb Time Adjusts the decay time of the rear reverberant sound. 117
Reverb Delay Adjusts the delay between the direct sound and reverberant sound generation. 118
Reverb Level Adjusts the volume of the reverberant sound. 118
Surround Initial Delay Adjusts the delay between the direct sound and surround sound field generation. 118
Surround Room Size Adjusts the broadening effect of the surround sound field. 118
Surround Liveness Adjusts the loss of the surround sound field. 118
Surround Back Initial Delay Adjusts the delay between the direct sound and surround back sound field generation. 118
Surround Back Room Size Adjusts the broadening effect of the surround back sound field. 118
Surround Back Liveness Adjusts the loss of the surround back sound field. 118
Surround Decoder
Decode Type Selects a surround decoder to be used in combination with the selected sound program. 119
Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played. 119
Center Image Adjusts the center localization (broadening effect) of the front sound field. 119
7ch Stereo
Level Adjusts the entire volume. 119
Front / Rear Balance Adjusts the front and rear volume balance. 119
Left / Right Balance Adjusts the left and right volume balance. 119
Height Balance Adjusts the height volume balance using the presence speakers. 119
Monaural Mix Enables/disables monaural sound output. 120
Reset Restores all default settings. 120
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 120
Volume
Max Volume Sets the limit value of the volume. 120
Initial Volume Sets the initial volume for when this receiver is turned on. 120
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 120
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted. 120
Virtual Speaker
VPS Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers. 121
VSBS Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 121
Menu Item Function Page