Owner's Manual

En 40
5 Connecting other devices
Connect a device compatible with the trigger function.
Connecting a device compatible with the trigger
function
The trigger function can control an external device in conjunction with operating the unit (such
as powering on/off and input selection). If you have a Yamaha subwoofer that supports a
system connection or a device with a trigger input jack, you can use the trigger function by
connecting the external device to one of the TRIGGER OUT jacks with a monaural mini-plug
cable.
X
You can configure the trigger function settings in “Trigger Output1” and “Trigger Output2” (p.134) in the “Setup”
menu.
6 Connecting the power cable
After all the connections are complete, connect the supplied power cable to the unit and then
to an AC wall outlet.
3
HDMI
)
(ZONE OUT)
AV 4
(HDCP2.2)
AV 5 AV 6 AV 7
IN OUT
REMOTE
1
2
SPEAKERS
CENTER FRONT
SURROUND BACK
F.PRESENCE
R R RL L L
ZONE 2 ZONE 2/BI-AMP
E
OUT
SUBWOOFER CENTER
R
OUND SUR. BACK
EXTRA SP1EXTRA SP2
RS-232C
TRIGGER
OUT
1
2
12V 0.1A
MAX. TOTAL
NETWORK
HDMI OUT
(4
NET
) (8 SERVER)
(HDCP2.2)
V
2
V
1
V
IE)
B
)
TRIGGER
OUT
1
2
12V 0.1A
MAX. TOTAL
The unit (rear)
TRIGGER OUT 1-2 jacks
System connector
jack
Yamaha subwoofer that
supports a system connection
3
Z
ONE OUT)
OUT
O
TE
AC IN
CENTER
FRONT
R L
RS-232C
NETWORK
D
MI OUT
(4
NET
) (8 SERVER)
(HDCP2.2)
To an AC wall outlet
The unit (rear)