User Manual

ManualsBrandsYamaha ManualsAV receiversRX-V2065

Firmware Update Procedure for RX-V2065

Page.1 of 7

August, 2009

Subject: RX-V2065 Firmware Update ver. 033.103.026

Yamaha is pleased to offer this firmware update to ensure the best possible

performance for your Yamaha RX-V2065 AV Receiver.

This firmware adds compatibility with Music CAST2 and optional video assign menu to

the input of AV3, AV4, AUDIO1 and AUDIO2.

The following pages contain the firmware update instructions for RX-V2065. You can

easily update to the latest firmware by either using an USB thumb drive or through

internet. In order to properly execute the update, read all instructions carefully. The

following links will also lead you directly to the beginning of each individual section of

the instructions.

NOTE: Performing this update will RESET ALL THE SETTINGS

of your

receiver back to factory default.

9 Click here to confirm your current firmware version.

9 Click here to firmware update by USB. (USB thumb drive required)

Update by Network is recommended if your receiver is connected to the internet.

9 Click here to firmware update by Network. (Internet connection required)

9 Click here to confirm updated firmware version

9 Click here for troubleshooting.

< IMPORTANT NOTICE >

Do not attempt to update your Yamaha receiver using any other data file except those provided

directly from the Yamaha website or through your network connection.

Follow the instructions carefully and do not attempt any other procedures not specified in the

instructions provided by Yamaha.

Improperly updated products may cause improper operation, and any parts or service required

to restore proper operation will not be covered under the Yamaha Limited Warranty.

Summary of content (7 pages)

PAGE 1
Firmware Update Procedure for RX-V2065 August, 2009 Subject: RX-V2065 Firmware Update ver. 033.103.026 Yamaha is pleased to offer this firmware update to ensure the best possible performance for your Yamaha RX-V2065 AV Receiver. This firmware adds compatibility with Music CAST2 and optional video assign menu to the input of AV3, AV4, AUDIO1 and AUDIO2. The following pages contain the firmware update instructions for RX-V2065.
PAGE 2
Firmware Update Procedure for RX-V2065 Confirming Firmware Version Below are the procedures to confirm your firmware version. Step1 Enter ADVANCED SETUP mode Confirm that your receiver is powered off. (Standby condition) While pressing the STRAIGHT button, press (and release) the MAIN ZONE button and keep depressing the STRAIGHT button until “ADVANCED SETUP” appears on the front panel display. (Note: “ADVANCED SETUP” is displayed only for a few seconds.
PAGE 3
Firmware Update Procedure for RX-V2065 Firmware Update by USB Requirement: - USB thumb drive, with enough free space to store over 16 MB. (File system with FAT16 or FAT32 format) - Firmware file provided by YAMAHA,”RX-V2065_xxxx.bin”. Step1 Prepare USB thumb drive for the update Download and copy the firmware, “RX-V2065_xxxx.bin” into the root directory of the USB thumb drive. Drag & Drop the file into USB drive. Step2 Power off the receiver. (Standby condition).
PAGE 4
Firmware Update Procedure for RX-V2065 Step4 Select “USB FirmUpdate” from the menu Rotate the PROGRAM selector counterclockwise and select “USB FirmUpdate ”. Step5 Start firmware update Press STRAIGHT button to start update. NOTE: Be aware that performing this update will clear all your receiver setting back to factory default. Firmware reprogramming in progress CAUTION! Step6 DO NOT interrupt power or remove the USB thumb drive during the update.
PAGE 5
Firmware Update Procedure for RX-V2065 Firmware Update by Network Requirement: Internet connection Your receiver is connected to the internet if you can receive internet radio stations. (see owner’s manual for details) Step1 Power off the receiver. (Standby condition). Step2 Enter ADVANCED SETUP mode While pressing the STRAIGHT button, press (and release) the MAIN ZONE ON/OFF button and keep depressing the STRAIGHT button until “ADVANCED SETUP” appears on the front panel display.
PAGE 6
Firmware Update Procedure for RX-V2065 Step3 Select “NET FirmUpdate” from the menu Rotate the PROGRAM selector counterclockwise and select “NET FirmUpdate ”. Step4 Start firmware update Press STRAIGHT button to start update. NOTE: “CHECKING….” will appear. Be aware that performing this update will clear all your receiver setting back to factory default. If “UPDATE UNAVAIL” appears, this means your receiver is already up-to-date. In this case, power off to exit from Advanced Setup.
PAGE 7
Firmware Update Procedure for RX-V2065 Troubleshooting Case #1: “UPDATE FAIL” appeared during the USB update. Cause: For some reason, the receiver can’t read the firmware data. For your solution, please check the following; 9 USB drive is securely connected to the receiver. 9 USB drive is inserted before the receiver is powered on for the update. 9 The firmware data, RX-V2065_xxxx.bin is stored in the root directory of the USB drive. 9 There is no other data but the firmware data in the USB drive.