User Manual

Firmware Update Procedure for RX-V2065
Page.5 of 6
Step4
Start firmware update
Press STRAIGHT button to start update. “CHECKING….” will appear.
If “UPDATE UNAVAIL” appears, this means your receiver is already
up-to-date. In this case, power off to exit from Advanced Setup.
Firmware reprogramming in progress
Caution! DO NOT interrupt power during the update.
In case the power is accidentally cut off resulting in a condition where you
can’t recover normal operation, refer to troubleshooting method CASE#3
on the last page.
Step5
When completed, “UPDATE SUCCESS” appears on the display.
Turn off the power of the receiver by pressing MAIN ZONE button.
Step6
Check updated firmware version
While pressing the STRAIGHT button, press (and release) the MAIN ZONE
ON/OFF button and keep depressing the STRAIGHT button until
“ADVANCED SETUP” appears on the front panel display.
(Note: “ADVANCED SETUP” is displayed only for a few seconds.)
Rotate the PROGRAM selector counterclockwise and select “VER”.
Confirm that the firmware version is updated to the latest version.
MAIN ZONE
STRAIGHT
PROGRAM