Owner's Manual

En 140
Video/HDMI
Configures the video/HDMI settings.
■ Information
Displays information about the current video signal and the TVs connected to the HDMI OUT
jacks.
Choices
■ Video Mode
Configures the video signal processing settings.
Video Mode
Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).
Settings
X
When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to reduce
video output delay.
Resolution
Selects a resolution to output HDMI video signals when “Video Mode” is set to “Processing”.
Settings
X
If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” (p.157) in the
“ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on your TV
normally.)
Aspect
Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to “Processing”.
Settings
X
This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p
(4K) signals.
HDMI Signal Presence or absence of HDMI signal input/output
HDMI Resolution Resolutions of input signal (analog or HDMI) and output signal (HDMI)
HDMI Monitor
Video Resolution
Resolutions supported by the TV
Direct
Disables the video signal processing.
Processing
Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.
Through Does not convert the resolution.
Auto
Selects a resolution automatically in accordance with TV resolution.
480p/576p, 720p,
1080i, 1080p, 4K
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)
Through
Does not convert the aspect ratio.
16:9 Normal
Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the
screen.