Owner's Manual

En 149
■ Zone Rename
Changes the zone name displayed on the front display or TV screen.
■ Setup procedure
1
Use the cursor keys to select Zone, and then press ENTER.
2
Use the cursor keys and ENTER to rename.
X
To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “SAVE” and press ENTER.
X
To restore the default setting, select “RESET”.
4
To exit from the menu, press SETUP.
■ Party Mode Set
Enables/disables switching to the party mode (p.112) for each zone.
Choice
Target: Zone2, Target: Zone3, Target: Zone4
Settings
X
When party mode is being used, the Disable/Enable setting cannot be changed.
System
Configures the system settings.
■ Information
Displays the system information on the unit.
Choices
■ Language
Select an on-screen menu language.
Settings
English
, Japanese, French, German, Spanish, Russian, Italian, Chinese
X
The information on the front display is provided in English only.
Disable Disables switching to the party mode.
Enable
Enables switching to the party mode. You can turn on/off the party mode by
pressing PARTY on the remote control.
Remote ID The unit’s remote control ID setting
TV Format The unit’s video signal type
Speaker Impedance The speaker impedance setting of the unit
System ID System ID number
Firmware Version The version of firmware installed on the unit