Owner's Manual

En 51
5 Connecting other devices
Connect a device compatible with the trigger function.
Connecting a device compatible with the trigger
function
The trigger function can control an external device in conjunction with operating the unit (such
as powering on/off and input selection). If you have a Yamaha subwoofer that supports a
system connection or a device with a trigger input jack, you can use the trigger function by
connecting the external device to one of the TRIGGER OUT jacks with a monaural mini-plug
cable.
X
You can configure the trigger function settings in “Trigger Output1” and “Trigger Output2” (p.153) in the “Setup”
menu.
6 Connecting the power cable
After all the connections are complete, connect the supplied power cable to the unit and then
to an AC wall outlet.
3
D
MI
AV 4
(HDCP2.2)
AV 5 AV 6 AV 7
IN OUT
REMOTE
1
2
SPEAKERS
CENTER FRONTSURROUND BACK
R.PRESENCE
R RL L
R L
L
ZONE 2/ZONE 3/F.PRESENCE
PRE OUT
(REAR)
SUBWOOFER
CENTER FRONT
S
UR. BACK
(FRONT)
EXTRA SP2
RS-232C
TRIGGER
OUT
1
2
12V 0.1A
MAX. TOTAL
NETWORK
HDMI OUT
(4
NET
)
(8 SERVER)
(HDCP2.2)
(ZONE OUT)
TRIGGER
OUT
1
2
12V 0.1A
MAX. TOTAL
The unit (rear)
TRIGGER OUT 1-2 jacks
System
connector
jack
Yamaha
subwoofer
Power amplifier
(such as MX-A5000)
Trigger In
(+12V)
3
OUT
O
TE
AC IN
CENTER
FRONT
R
L
L R L
ZONE 2/ZONE 3/BI-AMP
F.PRESENCE
EXTRA SP1
RS-232C
NETWORK
H
DMI OUT
(4
NET
)
(8 SERVER)
(
HDCP2.2)
Z
ONE OUT)
To an AC wall outlet
The unit (rear)