User Manual

ManualsBrandsYamaha ManualsAUDIO VISUALRX-V371

PUSH

- 1 -

for North America

Quick Reference Guide

English

Preparing the remote control

Take off the battery compartment cover.

Insert the two supplied AAA batteries into the battery case, following the polarity

markings.

Snap the battery compartment cover back into place.

■

Accessories

■

Items necessary for connection

The following accessories are supplied with this product.

Speakers

External components Cable

• Cables for connecting external components

(may differ depending on the devices you are connecting)

• Speaker cables

(a quantity to match the number of speakers you are connecting)

• Audio pin cable

(for subwoofer)

Remote control

Front speaker

Ex. Ex. Ex. Ex.

Playback device such as BD

(Blu-ray Disc)/DVD players

Batteries (2) (AAA, R03,

UM-4)

Center speaker

AM loop antenna

Surround speaker

Indoor FM antenna VIDEO AUX input cover

Active subwoofer

• Use speakers with an impedance of at least 6Ω.

• If you are using a CRT TV, we recommend that you use magnetically shielded speakers.

• Prepare at least two speakers (for front). The priority of the other speakers is as follows:

1 Two surround speakers

2 One center speaker

Summary of content (8 pages)

PAGE 1
English for North America Quick Reference Guide ■ Accessories The following accessories are supplied with this product. PUSH Batteries (2) (AAA, R03, UM-4) Remote control AM loop antenna Indoor FM antenna VIDEO AUX input cover Preparing the remote control 1 3 2 1 Take off the battery compartment cover. 2 Insert the two supplied AAA batteries into the battery case, following the polarity markings. 3 Snap the battery compartment cover back into place.
PAGE 2
Connect and install as follows the first time you use this unit. See the following explanations for the connections for each number.
PAGE 3
1 Connect the speakers Surround speaker R L Front speaker R L Caution: • Remove the AC power cord of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity.
PAGE 4
2 Connect a TV Video input to this unit is output to a TV using output jacks of the same kind. When you have made connections using different types of video such as HDMI and component video, make the same connection with your TV. When viewing, be sure to switch the input source on your TV to match the playback device.
PAGE 5
3 Connect playback device such as BD/DVD players and recorders If your playback device has multiple audio/video outputs, connect with the following priority (A to D) to enjoy a higher quality sounds and images.
PAGE 6
5 Set up speaker parameters When you finish connecting, adjust the status, size, and volume of each speaker so that the output is normal. CODE SET TRANSMIT SOURCE RECEIVER SLEEP RECEIVER A STEP 1: Display the setting menu HDMI 1 2 1 2 3 4 3 4 1 2 3 A AV AUDIO 5 V-AUX V VAUX [ A ] 1 2 [ B ] DOCK PRESET TUNING TUNER FM INFO AM MEMORY Press RECEIVER A on the remote control to switch this unit on. Press SETUP on the remote control.
PAGE 7
8 Press Cursor B / C to select the speaker (subwoofer) that you want to configure, and press Cursor D / E to set the distance. If necessary, you can change the setting units under “Unit.” Information Unit Front L Front R Center Sur. L Sur. R SWFR Description Switches between setting units (feet / meters). Front speaker L Front speaker R Center speaker Surround speaker L Surround speaker R Subwoofer Setting feet (ft) / meters (m) 1.0 ft to 80.0 ft (0.30 m to 24.0 m) 1.0 ft to 80.0 ft (0.30 m to 24.0 m) 1.
PAGE 8
Operation guide INFO MEMORY PRESET FM AM TUNING VOLUME SCENE BD DVD PHONES INPUT TONE CONTROL TV CD PROGRAM RADIO VIDEO AUX STRAIGHT SILENT CINEMA PORTABLE VIDEO AUDIO A Switches this unit between on and standby modes This unit switches between on and standby mode every time you press this key. CODE SET TRANSMIT B Choose an input source to listen to SOURCE RECEIVER The name of the selected input source appears on the front panel display. SLEEP HDMI VOL.