User Manual

En 23
CONNECTIONS
Setting up speaker parameters
5
Use jCursor B / C to select the speaker
(subwoofer) you want to configure, and
then use jCursor D / E to select speaker
status and size.
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
6
Press jRETURN when setting is complete.
Return to the previous menu.
This completes step 2.
STEP 3: Set the distance from the
listening point
7
Press jCursor C to display “Distance” and
press jENTER.
8
Press jCursor B / C to select the speaker
that you want to configure, and press
jCursor D / E to change the distance.
If necessary, you can change the setting units under
“Unit.”
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
9
Press jRETURN when setting is complete.
Return to the previous menu.
This completes step 3.
RETURN
ENTER
7
8
5
6
9
0
10
1
2
3
4
R
EC
ENT
TV
TV V
O
L TV
CH
I
NPUT
M
U
TE
RECEIVER
SC
ENE
O
PTI
ON
S
ET
UP
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MIT
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET T
U
NIN
G
MO
VI
E
MUS
I
C
S
TERE
O
BD
D
VD
TV
C
D
R
ADI
O
MU
T
E
T
O
P
MENU
PO
P-
UP
MENU
DI
S
PLAY
SOU
R
CE
CO
DE
S
ET
D
OCK
[
A
]
[
B
]
j
jCursor B / C / D / E
jENTER
jRETURN
Information Description Setting
Subwoofer Sets the subwoofer status. Yes/None
Front Selects the size (sound
reproduction capacity) of the
front speakers.
Small/Large
Center Selects the size of the center
speakers. Choose “None” if
you do not have a center
speaker connected.
None/Small/
Large
Sur. LR Selects the size of the surround
speakers. Choose “None” if
you do not have surround
speakers connected.
None/Small/
Large
Crossover Audio with a frequency below
this limit will be output from
the subwoofer or the front
speakers.
40Hz to
200Hz
SWFR Phase Switches the phase of the
subwoofer.
NRM/REV
Extra Bass Selects whether to play front
channel low-frequency
components through either of
the front speakers or the
subwoofer (Off), or through
both the subwoofer and front
speakers (On).
On/Off
• Whether or not you set “Crossover,” “SWFR Phase,”
and “Extra Bass” is optional. Check how the effects
sound and then configure them to your liking.
• Use the following as a guide when setting speaker
sizes.
When speaker size is set to “Small,” low-frequency
components of the speakers you configured are
produced from the subwoofer (or from the front
speakers if there is no subwoofer).
Woofer diameter
• 6-1/4 in (16 cm) or larger
→ Large
• 6-1/4 in (16 cm) or smaller
→ Small
SW
C
L
SL SR
R
Unit;;;;;;feet
DIST
VOL.
Information Description Setting
Unit Switches between setting
units (feet / meters).
feet (ft) /
meters (m)
Front L Front speaker L 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Front R Front speaker R 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Center Center speaker 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Sur. L Surround speaker L 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Sur. R Surround speaker R 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
SWFR Subwoofer 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Continues to the
next page