Owner’s Manual AV Receiver English for North America
CONTENTS INTRODUCTION Features and capabilities ................................................... 3 About this manual............................................................. 4 Supplied accessories......................................................... 4 Part names and functions.................................................. 5 Front panel........................................................................ 5 Rear panel.........................................................................
INTRODUCTION Features and capabilities ■ Built-in high-quality, high-power 5-channel amplifier ■ 1-button input/sound field program switching (SCENE function) .......................26 ■ Speaker connections for 2- to 5.1-channel configurations – – – – – Speaker channels and functions .................................................................................................................9 Speaker layout.................................................................................................
INTRODUCTION Features and capabilities About this manual • This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority. • “dHDMI1” (example) indicates the name of the parts on the remote control. Refer to the “Remote control” (☞p. 8) for the information about each position of the parts. • J1 indicates that the reference is in the footnote.
INTRODUCTION Part names and functions g TUNING jj / ii Front panel h a A (Power) b c d e f Switches this unit between on and standby modes. INFO Changes the information shown on the front panel display (☞p. 7). MEMORY Registers FM/AM stations as preset stations (☞p. 32). J1 PRESET j / i Selects an FM/AM preset station (☞p. 32). J1 FM Sets the FM/AM tuner band to FM (☞p. 30). J1 AM Sets the FM/AM tuner band to AM (☞p. 30). J1 a i j k l TONE CONTROL Changes FM/AM tuner frequencies (☞p. 30).
INTRODUCTION Part names and functions d ANTENNA jacks Rear panel e a DOCK jack b c For connecting an optional Yamaha iPod universal dock (such as YDS-12) (☞p. 34) or Bluetooth wireless audio receiver (YBA-10) (☞p. 36). HDMI OUT jack For connecting an HDMI - compatible TV to output audio/video signals to (☞p. 14). HDMI1-4 jacks For connecting external components equipped with HDMIcompatible outputs to receive audio/video signals from (☞p. 16).
INTRODUCTION Part names and functions f MUTE indicator Front panel display a HDMI indicator b c d e ■ Changing the front panel display Flashes when audio is muted. g VOLUME indicator Lights up when HDMI signals are input at the selected HDMI input source. CINEMA DSP indicator Lights up when a sound field effect that uses CINEMA DSP technology is selected. Tuner indicator Lights up when receiving an FM/AM broadcast.
INTRODUCTION Part names and functions a Remote control signal transmitter Remote control Transmits infrared signals. b TRANSMIT c SOURCE A (SOURCE Power) b c Switches an external component on and off.
CONNECTIONS Connecting speakers This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and connections in your listening environment. ■ Surround left and right speakers Speaker channels and functions The surround speakers are for effect and vocal sounds with the 5.1-channel speakers providing reararea sounds.
CONNECTIONS Connecting speakers Speaker layout Connecting speakers 5.1-channel speaker layout (5 speakers + subwoofer) ■ Changing speaker impedance This unit is configured for 8Ω speakers when it is dispatched from the factory. When connecting to 6Ω speakers, carry out the following procedure to switch to 6Ω. Front speaker R 1 2 Front speaker L Subwoofer Set this unit to the standby mode. Press A while pressing and holding STRAIGHT on the front panel.
CONNECTIONS Connecting speakers Connect your speakers to their respective terminals on the rear panel. Front speaker Surround speaker R R L L ANTENNA HDMI 4 FM GND AM SPEAKERS FRONT SURROUND CENTER OR OUT AUDIO 2 AUDIO OUT Subwoofer SUBWOOFER Center speaker CAUTION • Remove the AC power cord of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables.
CONNECTIONS Connecting speakers ■ Connecting front speakers KE RS 2 ■ Connecting center speakers / surround speakers 3 FR ON SU EA KE NT ER 1 3 4 2 3 4 SP ND CE T 1 1 RR OU ■ Connecting the subwoofer 2 Remove approximately 10mm of insulation from the ends of the speaker cables, and twist the bare wires of the cables together firmly so that they will not cause short circuits. Loosen the speaker terminals.
CONNECTIONS Connecting external devices ■ Audio jacks Cable plugs and jacks The main unit is equipped with the following input/output jacks. Use jacks and cables appropriate for components that you are going to connect. ■ Audio/Video jacks OPTICAL jacks COAXIAL jacks These jacks transmit optical digital audio signals. Use fiber-optic cables for optical digital audio signals. These jacks transmit coaxial digital audio signals. Use pin cables for digital audio signals.
CONNECTIONS Connecting external devices ■ Connecting an HDMI video monitor Connecting a TV monitor Connect the HDMI cable to the HDMI OUT jack. This unit is equipped with the following three types of output jack for connection to a TV. HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input signal format supported by your TV.
CONNECTIONS Connecting external devices ■ Connecting a video monitor When using other TVs Connect the video pin cable to the VIDEO (MONITOR OUT) jack. To transmit sound from the TV to this unit, connect its AV1-5 or AUDIO1-2 jacks to the TV’s audio output jacks. Depending on the connection on TV, connect the TV’s audio output to the AV1-5 or AUDIO1-2.
CONNECTIONS Connecting external devices CODE SET TRANSMIT SOURCE Connecting BD/DVD players and other devices RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 This unit has the following input jacks. Connect them to the appropriate output jacks on the external components. AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK Input jack TUNER FM AM INFO MEMORY PRESET TUNING ENHANCER SUR.
CONNECTIONS Connecting external devices ■ Connecting BD/DVD players and other devices with component cables ■ Component connections to analog audio output devices Connect the device with a component video cable to one of the AV1-2 input jacks. Component video / Audio output Using optical digital audio output sources Select the AV1 input that the external device is connected to for playback.
CONNECTIONS Connecting external devices ■ Connecting BD/DVD players and other devices with video cables Connect the external device with a video pin cable to one of the AV3-5 input jacks. Using analog stereo audio output sources Select the AV5 input that the external device is connected to for playback. Using optical digital audio output sources Select the AV4 input that the external device is connected to for playback.
CONNECTIONS Connecting external devices ■ Connecting CD players and other audio devices Using coaxial digital output sources Select the AV input (AV2 or AV3) that the external device is connected to for playback. Using analog stereo output sources Select the audio input (AUDIO1-2) that the external device is connected to for playback.
CONNECTIONS Connecting external devices Connecting video cameras and portable audio players Transmitting input A/V to external devices Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, game consoles, or portable audio devices to the receiver. Select the V-AUX input to use these connected devices. This receiver can transmit selected incoming analog audio/video signals to external devices through the AV OUT and AUDIO OUT jacks.
CONNECTIONS Connecting the FM/AM antennas An indoor FM antenna and an AM loop antenna are included with this receiver. Connect these antennas properly to their respective jacks. AM loop antenna Position the AM antenna away from the receiver. The wires of the AM antenna have no polarity. You can connect either wire to the AM jack or the GND jack.
CONNECTIONS CODE SET TRANSMIT SOURCE Setting up speaker parameters RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK TUNER FM AM PRESET INFO TUNING MUSIC STEREO STRAIGHT SCENE BD DVD STEP 1: Display the setting menu STEP 1: Display the setting menu 1 2 Display the Setup menu from which you can configure all settings for this unit, and then display the menu for speaker settings. MEMORY ENHANCER SUR.
CONNECTIONS Setting up speaker parameters CODE SET TRANSMIT SOURCE RECEIVER SLEEP 5 HDMI 1 2 1 2 3 4 3 4 AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK Use jCursor B / C to select the speaker (subwoofer) you want to configure, and then use jCursor D / E to select speaker status and size. Information Description • Whether or not you set “Crossover,” “SWFR Phase,” and “Extra Bass” is optional. Check how the effects sound and then configure them to your liking.
CONNECTIONS Setting up speaker parameters CODE SET TRANSMIT SOURCE STEP 4: Playback a test tone RECEIVER SLEEP STEP 5: Adjust the volume HDMI 1 2 1 2 3 4 3 4 AV 5 V-AUX [ A ] 1 2 [ B ] DOCK TEST TUNER FM TUNING 13 L SL SW C Press jCursor B repeatedly to display “Level” and press jENTER. LEVEL VOL. >Off On AM PRESET INFO Press jCursor C repeatedly to display “Test Tone” and press jENTER. VOL.
PLAYBACK CODE SET TRANSMIT SOURCE Basic playback procedure RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK d TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC 1 2 Turn on external components (TV, DVD player, etc.) connected to this unit. Turn on this unit and select the input source using dInput selector. The name of the selected input source is displayed for a few seconds.
PLAYBACK Changing input settings with a single key (SCENE function) CODE SET TRANSMIT SOURCE RECEIVER SLEEP This unit has a SCENE function that allows you to turn the power on and change input sources and sound field programs with one key. HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK PRESET TUNING TUNER FM AM INFO MEMORY Four scenes are available for different uses, such as d playing movies or music.
PLAYBACK Enjoying sound field programs CODE SET TRANSMIT SOURCE RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK ■ Enjoying unprocessed playback ■ Enjoying stereo playback (Straight decoding mode) Use straight decoding mode when you want to playback sound without sound field processing. You can playback as follows in straight decoding mode. 2-channel sources such as CD TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC TUNING ENHANCER SUR.
PLAYBACK Enjoying sound field programs Sound field programs Roleplaying Game This sound field is suitable for role-playing and adventure games. This program adds depth to the sound field for natural and realistic reproduction of background music, special effects and dialog from a wide variety of scenes. in the table indicates the sound field program for CINEMA DSP. ■ Category: MOVIE Sound field programs optimized for viewing video sources such as movies, TV programs, and games.
PLAYBACK Enjoying sound field programs ■ Category: STEREO Suitable for listening to stereo sources. 2ch Stereo Use this program to mix down multi-channel sources to 2 channels. When multi-channel signals are input, they are down mixed to 2 channels and output from the front left and right speakers. 5ch Stereo Use this program to output sound from all speakers. When you play back multi-channel sources, this unit down-mixes the source to 2 channels, and then outputs the sound from all speakers.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP HDMI 1 2 3 4 3 4 When using the FM/AM tuner, adjust the direction of the FM/AM antenna connected to this unit to get the best reception. AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK d The FM/AM tuner of this unit provides the following two modes for tuning. TUNER FM AM INFO MEMORY PRESET TUNING Normal tuning ENHANCER SUR.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER ■ When signal reception is poor SLEEP HDMI 1 2 1 2 3 4 3 4 When you are receiving an FM broadcast and cannot obtain a stable stereo broadcast, you can force this unit to receive in a monaural mode. AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK d TUNER FM AM PRESET INFO TUNING e MEMORY ENHANCER SUR.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE ■ Registering stations manually RECEIVER SLEEP 1 2 1 2 3 4 3 4 Select stations by hand and register them as presets individually. AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK d TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING 2 STEREO STRAIGHT SCENE BD DVD TV CD RADIO OPTION VOLUME ENTER RETURN POP-UP MENU Tune in to the station you wish to register, referring to “Selecting a frequency for reception (Normal tuning)” (☞p.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE ■ Combining the video signals and RECEIVER SLEEP radio audio signals HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK PRESET TUNING TUNER FM AM INFO MEMORY MOVIE MUSIC Select the video signal to be output from the video output jack on this unit when TUNER is selected as the input source. For example, when watching the sports relay on the TV, only audio can be switched to the radio d audio. 1 2 ENHANCER SUR.
PLAYBACK Playing back tunes from your iPod™/iPhone™ CODE SET TRANSMIT SOURCE RECEIVER SLEEP Once you have connected a Yamaha iPod universal dock (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound field programs (☞p. 29) to give compressed audio formats such as MP3 a sharper, more dynamic sound.
PLAYBACK Playing back tunes from your iPod™/iPhone™ CODE SET TRANSMIT SOURCE RECEIVER ■ To charge the iPod/iPhone when this unit is in standby mode SLEEP HDMI 1 2 1 2 3 4 3 4 AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK PRESET TUNING d TUNER FM AM INFO MEMORY MOVIE MUSIC ENHANCER SUR.
PLAYBACK Playing back tunes from Bluetooth™ components CODE SET TRANSMIT SOURCE Playing back tunes from Bluetooth™ components RECEIVER SLEEP You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible portable music players. J1 HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK PRESET TUNING NOTE d TUNER FM AM INFO MEMORY e ENHANCER SUR.
PLAYBACK Playing back tunes from Bluetooth™ components CODE SET TRANSMIT SOURCE Using Bluetooth™ components RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK TUNER FM AM INFO MEMORY PRESET When pairing is complete, carry out the following procedure to achieve a wireless connection between this unit and the Bluetooth component. When the wireless d connection is complete, you playback from Bluetooth components.
SETUP CODE SET TRANSMIT SOURCE Configuring the settings specific for each input source (Option menu) RECEIVER SLEEP HDMI 1 2 3 4 3 4 This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from external devices, and other frequently used menu items. AV 1 2 AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK d Option menu display and setup 3 TUNER AM PRESET TUNING MEMORY ENHANCER SUR.
SETUP Configuring the settings specific for each input source (Option menu) ■ Adjusting volume between input sources Set as follows according on the desired combination of audio input jacks. Volume Trim Input source: Settings method Optical digital audio input Select AV1 or AV4. Connect the external component audio cable to the optical jack for the selected input. Coaxial digital audio input Select AV2 or AV3. Connect the external component audio cable to the coaxial jack for the selected input.
SETUP Configuring the settings specific for each input source (Option menu) ■ Changing FM mode (Stereo/Monaural) FM Mode Input source: ■ Bluetooth™ wireless connections Connect TUNER Sets this unit to automatically match FM broadcast frequencies in stereo, or to convert the frequency to monaural (☞p. 31). Disconnect Input source: Bluetooth (DOCK) stations Enables/disables the Bluetooth wireless connection (☞p. 37). Select “Connect” to establish the wireless connection.
SETUP Setting various functions (Setup menu) CODE SET TRANSMIT SOURCE RECEIVER SLEEP You can configure various function settings of this unit using the Setup menu. HDMI 1 2 3 4 3 4 AV 1 2 Setup menu display and settings AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK 1 TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING Press iSETUP on the remote control. HDMI SETUP ENHANCER SUR.
SETUP Setting various functions (Setup menu) ■ Manual speaker setup Manages settings for speakers Config SETUP Adjusts the output characteristics of the speakers based on manually set parameters. VOL. Speaker Setup L SL SW C In the Config submenu, you can select the speaker size characteristic (Large or Small). Select the size (sound reproduction capacity) that matches your speakers.
SETUP Setting various functions (Setup menu) Crossover Sets the lower limit of low-frequency component output from speakers set to “Small.” Audio with a frequency below that limit will be produced from the subwoofer or the front speakers. J1 ■ Controlling the volume of each speaker Level Distance Separately adjusts the volume of each speaker. Use jCursor B / C to select the desired speaker and adjust the volume with jCursor D / E.
SETUP Setting various functions (Setup menu) ■ Adjusting sound quality with the equalizer ■ Generating test tones 3 Equalizer Adjusts sound quality and tune with a graphic equalizer. Raising volume: Press jCursor E. Lowering volume: Press jCursor D. EQ Select Turns the graphic equalizer on or off. By selecting GEQ and pressing jENTER, you can adjust the characteristics of the graphic equalizer. GEQ (Default) Uses the graphic equalizer to adjust sound quality. Off Does not activate the equalizer.
SETUP Setting various functions (Setup menu) Sound Setup Lipsync Adjusts the delay between audio and video output (Lipsync function). VOL. L SL SW C R SR Sound Setup submenu Lipsync Adjusts the delay between video and audio output. Adaptive DRC Auto-adjusting the sound level to make even low volumes more audible. D.Range Selects the dynamic range adjustment method for digital audio playback. Max Volume Sets the maximum volume for this receiver. Init.
SETUP Setting various functions (Setup menu) ■ Auto-adjusting Dolby Digital and DTS dynamic range D.Range Selects the dynamic range adjustment method for audio bitstream (Dolby Digital and DTS) playback. Min/Auto (Min) Sets the dynamic range suitable for low volume or a quiet environment, such as at night, for bitstream signals except for Dolby TrueHD signals. (Auto) Adjusts the dynamic range for Dolby TrueHD signals based on input signal information.
SETUP Setting various functions (Setup menu) ■ Receiver operation via TV (HDMI Control) Control Set the HDMI Control function to “On” to operate devices connected via HDMI. If the TV or other external components support HDMI Control (ex. Panasonic VIERA Link), you can use the remote controls of those devices to operate some of this unit’s functions, and to synchronize this unit with the operation of those devices.
SETUP Setting various functions (Setup menu) CODE SET TRANSMIT SOURCE Making the receiver easier to use RECEIVER SLEEP HDMI 1 2 3 4 3 4 3 AV 1 2 SETUP AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK Func. Setup L SL SW C R SR Func. Setup submenu AM PRESET INFO MEMORY MOVIE MUSIC Input Rename Changes the input source names. AutoPowerDown Goes into standby mode. Dimmer Sets the Brightness of the front panel display.
SETUP Setting various functions (Setup menu) ■ Goes enter standby mode automatically when you leave it without operating Setting sound field program parameters You can set the parameters for the sound field programs (☞p. 50). AutoPowerDown If you do not operate this unit or use the remote control for an extended period of time, it will automatically go into standby mode (Auto Power Down function). This function’s default setting is “Off.
SETUP Setting sound field program parameters CODE SET TRANSMIT SOURCE RECEIVER SLEEP Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters). To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.
SETUP Setting sound field program parameters ■ Parameters usable in certain sound field programs EFCT LVL 2ch Stereo only Adjusts the effect level of the compressed music enhancer mode. Direct Automatically bypasses the DSP circuit and tone control circuit depending on the condition of tone control etc., when an analog sound source is played back. You can enjoy a higher quality sound.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE RECEIVER SLEEP c You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code). The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE n RECEIVER SLEEP MI 1 2 1 2 3 4 3 4 d Registering remote control codes for external component operations AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK The following section describes how to register remote control code using an example of the registration of the remote control codes of a Yamaha BD player connected to HDMI2 jack. TUNER FM AM PRESET INFO TUNING MEMORY ENHANCER SUR.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE n RECEIVER SLEEP Resetting all remote control codes HDMI 1 2 1 2 3 4 3 4 Resetting all remote control codes for external components to the initial factory settings.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup menu 3 Use PROGRAM to select the item to be set from the following items. Setting the impedance of speakers In the Advanced Setup menu, you can set the following settings. 1 2 Set this unit to the standby mode.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) CODE SET TRANSMIT SOURCE n RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 AV Avoiding crossing remote control signals when using multiple Yamaha receivers AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK ■ To change the remote control ID Initializing various settings for this unit Perform each of the following steps within 1 minute. Settings will be automatically stopped if more than 1 minute passes since the last operation.
SETUP Using the HDMI Control function This unit supports the HDMI Control function, which allows you to operate external components via HDMI. If you connect devices that support HDMI Control (ex. Panasonic VIERA Linkcompatible TVs, DVD/Blu-ray Disc recorders, etc.
SETUP Using the HDMI Control function CODE SET TRANSMIT SOURCE RECEIVER SLEEP 1 2 1 2 3 4 3 4 AV AUDIO 5 V-AUX [ A ] 1 2 [ B ] DOCK TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC ■ Switching the input source on this To use other jacks to input audio signals from TV, carry out the following procedure. When the HDMI Control (☞p. 57) is operating properly, the input source of this unit is automatically changed to match operations carried out on the TV. The default input jack is AV4.
SETUP Using the HDMI Control function CODE SET TRANSMIT SOURCE ■ Single HDMI cable input to TV RECEIVER SLEEP audio with Audio Return Channel function HDMI 1 2 1 2 3 4 3 4 AV When using a TV that supports HDMI functions and Audio Return Channel function, audio/video output from this unit to the TV or audio output from the TV to this unit can be transmitted through a single HDMI cable (Audio Return Channel function).
APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Problem Cause Remedy See page The power will not turn on. The protection circuitry operated three times consecutively.
APPENDIX Troubleshooting Problem No sound. No picture. Cause Remedy See page Incorrect input or output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 16 If a DVI-HDMI cable is used to connect the unit with an external component, then it is necessary to use an audio input jack for a different input to output audio. Display the HDMI Input Option menu for the connected cable, select “Audio In,” and select the jack to use for audio input.
APPENDIX Troubleshooting Problem No sound is heard from the surround speakers. No sound is heard from the subwoofer. Cause Remedy See page This unit is in straight decoding mode and a monaural source is being played back. Press gSTRAIGHT (on the remote control) to exit straight decoding mode. 27 Sound may not be output from certain channels depending on input sources or sound field programs. Try another sound field program. 26 A subwoofer is not connected, or it is disabled.
APPENDIX Troubleshooting HDMI™ Problem Tuner (FM/AM) Cause Remedy See page FM Problem The front panel display HDMI indicator is flashing. No picture or sound. (When using HDMI Control function) TV sound is not output from this unit when operating the remote control of the TV. An error with the HDMI connection has occurred. Try re-inserting the HDMI cable. — Confirm that HDMI video that is not supported by the unit is not being input (HDMI Input → Option menu → “Signal Info”).
APPENDIX Troubleshooting Remote control AM Cause The desired station cannot be tuned into with the automatic tuning method. The signal is weak, or the antenna connections are loose. Adjust the AM loop antenna orientation. 21 Use the manual tuning method. 30 Automatic station preset does not work. Automatic station preset is not available for AM stations. Use manual station preset. 32 Continuous crackling and hissing noises are heard. The supplied AM loop antenna is not connected.
APPENDIX Troubleshooting iPod™/iPhone™ Display Loading... Connect error Bluetooth™ Cause Remedy See page The unit is in the process of recognizing the connection with your iPod/iPhone. — The unit is in the middle of acquiring song lists from your iPod/iPhone. — There is a problem with the signal path from your iPod/iPhone to the unit. Turn off the unit and reconnect the Yamaha iPod universal dock to the DOCK jack of the unit.
APPENDIX Glossary Audio information Audio and video synchronization (lip sync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem, and the capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustment, HDMI version 1.
APPENDIX Glossary LFE 0.1 channel Compressed music enhancer Deep Color This channel reproduces low-frequency bass signals, and has a frequency range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only enforces a low-frequency range compared to the full-range reproduced by the other 5 channels in Dolby Digital or DTS 5.1-channel systems. The Compressed music enhancer feature of this unit enhances your listening experience by regenerating the missing harmonics in compression artifacts.
APPENDIX Information on HDMI™ ■ HDMI signal compatibility NOTES Audio signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc.
APPENDIX Specifications ■ INPUT/OUTPUT Input jacks • HDMI input x 4 • AV input x 5 [Audio] Digital input (optical) x 2, digital input (coaxial) x 2, analog input x 1 [Video] Component video jacks x 2, video jacks x 3 • AUDIO input x 2 [Audio] Analog jack x 2 • VIDEO AUX input x 1 [Audio] Analog x 1, stereo mini jack x 1 [Video] Video jack x 1 • DOCK input x 1 Output jacks • TV output (monitor output) x 3 [Audio/Video] HDMI x 1 [Video] Component video jack x 1, video jack x 1 • AV output x 2 [Audio] Analog
APPENDIX ■ VIDEO SECTION • Video Signal Type [U.S.A., Canada, Korea and General models].........................NTSC [Other models]............................................................................PAL • Signal Level Composite......................................................................1 Vp-p/75 Ω Component ...................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR) • Maximum Input Level (Video Conversion Off)....... 1.5 Vp-p or more • Signal to Noise Ratio ..............................
© 2011 Yamaha Corporation YD282A0/OMEN1
RX-V371_flyer.fm Page 1 Friday, January 7, 2011 3:40 PM U Additional information on specification for U.S.A. model The following specification is added for U.S.A. model as well as “Specifications” in the Owner’s Manual. • Rated Output Power for Front, Center, Surround (1 kHz, 0.9% THD, 8Ω, 2 channels driven simultaneously) FRONT L/R ................................................................. 80 W + 80 W CENTER...................................................................................
English for North America Quick Reference Guide ■ Accessories The following accessories are supplied with this product. PUSH Batteries (2) (AAA, R03, UM-4) Remote control AM loop antenna Indoor FM antenna VIDEO AUX input cover Preparing the remote control 1 3 2 1 Take off the battery compartment cover. 2 Insert the two supplied AAA batteries into the battery case, following the polarity markings. 3 Snap the battery compartment cover back into place.
Connect and install as follows the first time you use this unit. See the following explanations for the connections for each number.
1 Connect the speakers Surround speaker R L Front speaker R L Caution: • Remove the AC power cord of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity.
2 Connect a TV Video input to this unit is output to a TV using output jacks of the same kind. When you have made connections using different types of video such as HDMI and component video, make the same connection with your TV. When viewing, be sure to switch the input source on your TV to match the playback device.
3 Connect playback device such as BD/DVD players and recorders If your playback device has multiple audio/video outputs, connect with the following priority (A to D) to enjoy a higher quality sounds and images.
5 Set up speaker parameters When you finish connecting, adjust the status, size, and volume of each speaker so that the output is normal. CODE SET TRANSMIT SOURCE RECEIVER SLEEP RECEIVER A STEP 1: Display the setting menu HDMI 1 2 1 2 3 4 3 4 1 2 3 A AV AUDIO 5 V-AUX V VAUX [ A ] 1 2 [ B ] DOCK PRESET TUNING TUNER FM INFO AM MEMORY Press RECEIVER A on the remote control to switch this unit on. Press SETUP on the remote control.
8 Press Cursor B / C to select the speaker (subwoofer) that you want to configure, and press Cursor D / E to set the distance. If necessary, you can change the setting units under “Unit.” Information Unit Front L Front R Center Sur. L Sur. R SWFR Description Switches between setting units (feet / meters). Front speaker L Front speaker R Center speaker Surround speaker L Surround speaker R Subwoofer Setting feet (ft) / meters (m) 1.0 ft to 80.0 ft (0.30 m to 24.0 m) 1.0 ft to 80.0 ft (0.30 m to 24.0 m) 1.
Operation guide INFO MEMORY PRESET FM AM TUNING VOLUME SCENE BD DVD PHONES INPUT TONE CONTROL TV CD PROGRAM RADIO VIDEO AUX STRAIGHT SILENT CINEMA PORTABLE VIDEO AUDIO A Switches this unit between on and standby modes This unit switches between on and standby mode every time you press this key. CODE SET TRANSMIT B Choose an input source to listen to SOURCE RECEIVER The name of the selected input source appears on the front panel display. SLEEP HDMI VOL.
List of remote control codes Liste des codes de commande Lista de códigos de mando a distancia TV A.R.
Gibralter 0008, 0030, 0050, 0062 GoldHand 0277 Goldline 0320 GoldStar 0007, 0008, 0012, 0026, 0031, 0050, 0053, 0161, 0277, 0282, 0320, 0323, 0342, 0343, 0346, 0349, 0350 Goodmans 0246, 0272, 0282, 0320, 0323, 0337, 0343, 0344, 0349, 0350, 0462, 0473, 0477 Gorenje 0161, 0351 GPM 0340 GPX 0129 Gradiente 0240 Graetz 0347 Granada 0171, 0282, 0320, 0321, 0342, 0344, 0346, 0349, 0350 Grandin 0340, 0343, 0348, 0349 Gronic 0282 Grundig 0160, 0161, 0171, 0310, 0320 Grunpy 0058, 0059, 0179 Haier 0157, 0233 Halifax
0342, 0349, 0350, 0353, 0357, 0360, 0380, 0383, 0452, 0459, 0460 Philips Magnavox 0011, 0032, 0033 Phoenix 0161, 0277, 0320, 0339, 0349, 0350 Phonola 0277, 0320, 0339, 0349, 0350 Pilot 0007, 0008, 0050 Pioneer 0008, 0026, 0094, 0095, 0161, 0320, 0345, 0347, 0349, 0350, 0458 Plantron 0320, 0323, 0337, 0350 Playsonic 0282 Polaroid 0039, 0142, 0202, 0234 Poppy 0323, 0343 Portland 0007, 0008, 0026, 0053 Prandoni-Prince 0171, 0346 Precision 0282, 0342 Prima 0157, 0243, 0323, 0343, 0347 Princeton 0140 Prism 0023,
Yoko Yorx Zanussi Zenith 0161, 0277, 0282, 0320, 0323, 0337, 0340, 0342, 0343, 0349, 0350 0340 0282, 0346 0008, 0028, 0029, 0030, 0031, 0054, 0061, 0062 VCR ABS Adventura Adyson Aiwa 1016 1069 1008 1024, 1026, 1027, 1069 Akai 1021, 1027 Akiba 1008, 1029 Akura 1008, 1027, 1029 Alba 1008, 1009, 1024, 1025, 1029, 1030 Alienware 1016 Ambassador 1030 American High 1068 Amstrad 1008, 1009, 1026 Anitech 1008, 1029 Apex 1088 ASA 1028, 1031 Asha 1070 Asuka 1008, 1026, 1028, 1029, 1031 Audio Dynamics 1064 Audioso
Sonneclair Sonoko Sontec Sony 1008 1009, 1025 1031 1001, 1016, 1048, 1053, 1073, 1074, 1080, 1081, 1082, 1083, 1108, 1118, 1216 Stack 1016 Stack 9 1016 Standard 1009, 1025 Stern 1009 STS 1068 Sunkai 1024 Sunstar 1026 Suntronic 1026 Sunwood 1008, 1029 Superscan 1020 Sylvania 1020, 1068, 1069, 1102, 1126 Symphonic 1008, 1069, 1126 Systemax 1016 Tagar Systems 1016 Taisho 1024 Tandberg 1009 Tandy 1065 Tashiko 1026, 1071 Tatung 1026, 1027, 1028 TCM 1015, 1024, 1042 Teac 1009, 1069 Tec 1008, 1009, 1030 Technics
Prima Proceed Proscan Prosonic Protron Provision Pye Qwestar Raite RCA 2252 2130 2156 2360, 2377 2202 2358 2144 2148 2380 2021, 2029, 2104, 2105, 2131, 2149, 2156, 2157, 2229 RedStar 2356, 2360, 2362 Regent 2153 Reoc 2355 Rimax 2361 Rio 2133 Roadstar 2331, 2358 Ronin 2363 Rotel 2203 Rowa 2154, 2383 Rownsonic 2353 Saba 2148, 2188 Sabaki 2355 Saivod 2362 Sampo 2141 Samsung 2000, 2045, 2077, 2112, 2113, 2114, 2115, 2151, 2200, 2216, 2219, 2228, 2264, 2265, 2271, 2279, 2294, 2303, 2329, 2365 Sansui 2073, 2145,
TV86 Unika United Cable Universal Universum V2 Videoway View Star Viewmaster Vision Visiopass Vortex View Wittenberg Zenith Zentek 3077 3065, 3070 3018, 3119 3065, 3070 3097, 3099 3127 3019 3074, 3077, 3079 3127 3127 3097, 3100, 3101 3127 3098 3113, 3122, 3124 3126 Satellite AB Sat AccessHD ADB AGS Akai Alba 4216, 4217 4104 4220 4216 4053, 4055 4001, 4004, 4006, 4007, 4062, 4217 Aldes 4005, 4007, 4010 Allsat 4048, 4053, 4055 Allsonic 4005, 4008, 4024 Alltech 4217 Alpha 4053 Alpha Digital 4104 Alphastar 4
Rainbow RCA Realistic Redpoint Redstar RFT Roadstar Roch Rover Saba Sabre Sagem Sakura Samsung SAT Sat Cruiser Sat Partner Sat Team Satcom Satec Satelco Satford Satmaster Satplus Schneider Schwaiger SCS Seemann SEG Seleco Servi Sat Siemens Silva Skantin Skardin Skinsat SKR Skymaster Skymax SkySat Skyvision SM Electronic Smart Sony SR Star Choice Starland Starring Start Trak Strong STS STVI Sumida Sunny Sound Sunsat Sunstar Supermax Tandberg Tandy Tantec TCM Techniland TechniSat Technology Technosat Techn