Owner's Manual

FCC
INFORMATION
(for
US
customers)
1
IMPORTANT
NOTICE:
DO
NOT
MODIFY
THIS
UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets
FCC requirements. Modifications not expressly approved by Yamaha
may void your
authority, granted by the FCC, to use the product.
2
IMPORT
ANT: When connecting this product to accessories and/or another product use only
high quality shielded cables. Cable/s supplied with this product
MUST be used. Follow all
installation instructions. Failure to follow instructions could void your FCC authorization to
use this product in the USA.
3
NOTE:
This product has been tested and found to comply with the requirements
li
sted in
FCC Regulations, Part
15
for Class
"B
"
digital device
s.
Compliance with these requirements
provides a reasonable level
of
assurance that your use
of
this product in a residential
environment will not result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if
not installed. and used according to
the instructions found in the users manual, may cause interference harmful to the operation
of
other electronic devices.
Compliance with
FCC
regulations does not guarantee that interference will not occur in all
installations.
If
this product
is
found to be the source
of
interference, which can be determined by
turning the unit
"OFF'
and
"ON",
please
try to eliminate the problem by using one
of
the
following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize
power outlets that are on different branch (circuit breaker
or
fuse) circuits or install AC
line filter/s.
In the case
of
radio
or
TV interference, relocate/reorient the antenna.
If
the antenna lead-in is
300
ohm ribbon l
ea
d, change the lead-in to coaxial type cable.
If
these corrective measures do not produce satisfactory results, please contact the local retailer
authorized to distribute this type
of
product.
If
you can not locate the appropriate retailer, please
contact
Yamaha
Corporation
of
America AIV Division,
6600
Orangethorpe A venue, Buena Park,
CA
90620, USA.
The above statements apply ONLY
to those products
distributed by
Yamaha
Corporation
of
America or its subsidiaries.
2En
FOR
CANADIAN
CUSTOMERS
To prevent electric shock, match wide blade
of
plug to wide slot and fully insert.
CAN ICES-3(B)/NMB-3(B).
POUR LES CONSOMMATEURS CANADIENS
Pour eviter
Ie
s chocs ele
ct
riques, introduire Ia lame Ia plus large de la fiche dans la borne
correspondante de la prise
et
pousser
jusqu'au
fond.
CAN ICES-3(B)/NMB-3(B).
IMPORTANT
Please record the serial number
of
this unit in the space below.
MODEL:
Serial
No.:
The serial number is located on the rear
of
the unit. Ret
ai
n this Owner's
Ma
nual in a safe pla
ce
for future reference.
•
For U.K. customers
If
the socket outlets in the home are not suitable for the plug suppli
ed
with this appliance, it should
be cut
off
and an appropriate 3 pin plug fitted. For deta
il
s, refer to the instructions described below.
:
Rote
'
The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is
hazardous
if
engaged in a live socket outlet.
• Special
Instructions for U.K. Model
IMPORTANT
THE
WIRES
IN
MAINS
LEAD ARE
COLOURED
IN ACCORDANCE WITH THE
FOLLOWING CODE:
Blue:
NEUTRAL
Brown: LIVE
As
the colours
of
the wires in the mains lead
of
this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured
BLUE must be connected to the terminal which
is
marked with the
letter
Nor
coloured BLACK. The wire which is coloured BROWN
must be connected to the
terminal which is marked with the letter
Lor
coloured RED.
Making sure that neith
er
core is connected to the earth terminal
of
the three pin plug.