Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Before Using the Unit
- Preparations
- Placing speakers
- Connecting speakers
- Connecting a TV/playback devices
- Connecting the FM/AM antennas
- Connecting the power cable
- Selecting an on-screen menu language
- Optimizing the speaker settings automatically (YPAO)
- Playback
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Enjoying sound field effects (CINEMA DSP)
- Sound programs suitable for movies (MOVIE)
- Sound programs suitable for music (MUSIC)
- Sound programs suitable for stereo playback (STEREO)
- Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)
- Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)
- Enjoying surround sound with headphones (SILENT CINEMA)
- Enjoying unprocessed playback
- Enhancing the bass (Extra Bass)
- Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer)
- Enjoying sound field effects (CINEMA DSP)
- Listening to FM/AM radio
- Playing back music stored on a Bluetooth® device
- Playing back music stored on a USB storage device (Except for USA, Canada, Australia models)
- Configuring playback settings for different playback sources (Option menu)
- Configurations
- Configuring various functions (Setup Menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SP IMP.)
- Selecting the remote control ID (REMOTE ID)
- Changing the FM/AM tuning frequency setting (TU)
- Switching the video signal type (TV FORMAT)
- Selecting the HDMI 4K signal format (4K MODE)
- Restoring the default settings (INIT)
- Updating the firmware (UPDATE) (Except for USA, Canada, Australia models)
- Checking the firmware version (VERSION)
- Appendix
- Troubleshooting
- Specs
- Easy Setup Guide
- Scan of CD-ROM
- Warranty
Function
Configures the functions that make the unit easier to use.
Note
Default settings are underlined.
n
Input Rename
Changes the input source name displayed on the front display. You can also select a
name from the presets or a name created by the Auto Rename function.
Input sources
HDMI 1-4, AUDIO 1-2, AV 1-3, USB, Bluetooth, AUX
Default
HDMI 1-4: Auto
Others: Manual (For USB, Bluetooth, AUX only “Manual” can be selected.)
Procedure to rename automatically
1
Use the cursor keys (q/w) to select an input source to be
renamed.
2
Use the cursor keys (e/r) to select “Auto”.
The unit creates a name automatically according to the connected
device.
3
To check a created name, press ENTER.
Note
During selecting “Auto”, the created name is saved even after the device connection is
terminated. To reset to the default setting, switch the setting to “
Manual” at once and then set
it again to “Auto”.
4
To change another input source name, repeat steps 1 to 3.
5
To exit from the menu, press SETUP.
Procedure to rename manually
1
Use the cursor keys (q/w) to select an input source to be
renamed.
2
Use the cursor keys (e/r) to select “Manual” and press
ENTER.
Note
To select the preset name, use the cursor keys (e/r).
3
Press ENTER.
The edit screen is displayed.
4
Use the cursor keys and ENTER key to edit the name, and then
select “OK” to confirm the new name.
Note
To cancel the entry, select “CANCEL”.
5
To change another input source name, repeat steps 1 to 4.
6
To exit from the menu, press SETUP.
En
62