Owner’s Manual
Playing back music stored on a Bluetooth® device
You can play back music files stored on a Bluetooth device (such as smartphones) on
the unit. Also, you can enjoy audio played back on the unit using Bluetooth speakers/
headphones.
Please also refer to the owner’s manual of your Bluetooth device.
Bluetooth device
(such as smartphones)
The unit
Bluetooth speakers/headphones
The unit
Note
▪ The Bluetooth device must support A2DP.
▪ To use the BLUETOOTH function, set “Bluetooth” (p.64) in the “Setup” menu to “On”.
▪ You cannot make Bluetooth connections to a Bluetooth device (such as smartphones) and Bluetooth
speakers/headphones at the same time.
Connecting a Bluetooth® device (pairing)
When connecting a Bluetooth device to the unit for the first time, a pairing operation is
required. Pairing is an operation that registers the Bluetooth devices with each other
beforehand. Once pairing has been completed, subsequent reconnection will be easy
even after the Bluetooth connection is disconnected.
1
Press BLUETOOTH to select “Bluetooth” as the input source.
2
Hold down MEMORY on the front panel or the remote control for
more than 3 seconds.
“Searching…” appears on the front display.
Note
▪ You can also use the “Option” menu to pair a Bluetooth device. Press OPTION, and then use the
cursor keys to select “Pairing
”.
▪ If another Bluetooth device is already connected, disconnect the Bluetooth connection before
you perform a pairing operation.
▪ To cancel pairing, press MEMORY.
3
Turn on the Bluetooth function on your device.
4
From the Bluetooth device list on your device, select “*******
Yamaha” (*******: model name of the unit).
After pairing has been completed and the unit is connected to the
Bluetooth device, “
Connected” appears on the front display. While a
Bluetooth connection is established, the Bluetooth indicators light up.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
PARTY
ZONE
3 B2 A
MUT E V IRT UAL
SBL SB SBR
FPRFPL
STEREO
TUNED
VOL .
SL
SW
SR
Connected
Note
▪ If you are prompted to input a passkey during a pairing procedure, input the numerals “0000”.
▪ Complete a pairing procedure within 30 seconds.
▪ If no Bluetooth devices are found, “Not found” appears.
En
42