OWNER'S MANUAL
10 Ventilation - Slots and openings in the cabinet for ventilation and to ensure reliable operation product RISKOF ELECTRIC SHOCK DONOTOPEN CAUTION: ELECTRIC TO REDUCE THE RISK OF SHOCK, DO NOT REMOVE of Graphical 11 12 defeat WARNING Retain Instructions - The safety and operating instructions should be retained for future reference. 3 Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
___,T__'JIAVk'#lgtlle_'4i[elAvl¢ d) If the product the operating does not operate normally by following instructions.
1 To assure the finest performance, please read this 13 manual carefully. Keep it in a safe place for future reference. 2 3 4 5 Install this unit in a well ventilated, cool, dry, clean place with at least 30 cm on the top, 20 cm on the left and right, and 10 cm at the back of this unit -- away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
CONTENTS ............................................................ FEATURES ............................................................. GETTING STARTED ............................................ 1 2 3 Checking the package contents ................................. 3 Installing batteries in the remote control ................... 3 CONTROLS AND FUNCTIONS ......................... 4 Front panel ................................................................ Remote control ............................
Built-in 5-channel power amplifier • Minimum RMS output power (0.06% THD, 20 Hz - 20 kHz, 8_2) [U.S.A. and Canada modelsl Main: 75 W + 75 W Center: 75 W Rear: 75 W + 75 W [Other modelsl Main: 65 W + 65 W Center: 65 W Rear: 65 W + 65 W Multi-mode digital sound field processing • Dolby Pro Logic/Dolby Pro Logic 11 decoder • Dolby Digital/Dolby Digital + Matrix 6.1 decoder • DTS/DTS + Matrix 6.
Check your package to make sure it contains Remote control the following items. Batteries (4) (AAA, R03, ua-4) AM loop antenna O0_DO O00Pl 75-ohm/300-ohm antenna adapter (U.K. model) Indoor FM antenna (U.S.A., Canada, China, Korea and General models) A/V cable (U.S.A., Canada and Australia models) (Europe, U.K.
ql ] T_ESL_ 8_s _S_NT SWn_O , O L ,I U STANDBY/ON _) INPUT MODE Turns this unit on, or set it to the standby mode. When Sets the priority you turn this unit on, you will hear a click and there will DTS, ANALOG) to receive when one component is connected to two or more input jacks. Priority cannot be a 4 to 5-second sound. Standby delay before set when 6CH INPUT INPUT mode In this mode, this unit will consume power in order to receive remote control.
,_m]Avlltr,{e]l_,"f_,yAVlll=71hV[Bjrl[e]Av_ O _ Allows SILENT headphones. are output _) (PHONES jack) you enjoy DSP effect When (]_ BASS for private you connect listening headphones, with no signals to the speakers.
mMo]Avlt_fo]lF.IP_,YAVl_i_lh_[_l[o]Av[_ This section describes their functions. Make the remote control controls and sure that the AMP mode is selected before starting operation. See "REMOTE FEATURES" on pages 46 to 48. CONTROL Outputs window infrared component 0 0 O _]) Infrared control signals. Aim this window at the you want to operate. CODE SET Used when setting up the manufacturer code (see page 47).
,gmIAVltt,{ellf,,"f_'yAVlDI._IhV[BJrI[e]AV_ _) MUTE Mutes the sound. Press again to restore the audio output to the previous volume level. O STEREO/EFFECT Switches between normal stereo and DSP effect reproduction. When STEREO is selected, 2-channel signals are directed to the main left and right speakers without effect sounds and all Dolby Digital and DTS signals (except the LFE channel) are mixed down to the main left and fight speakers. Approximately I_) SET MENU Selects the SET MENU mode.
I[gl]#lt:{I]lk'f_Y#lml_]l]#[I,Jl[#]#_ I_ _I,_TS t l S'LENT " I _BY_O°U]_ t' ] Input source Shows the current _) MUTE Flashes (m up when the _, (nn PRO k0GIC/_), _ O I|TUINED MEMORY _'_1_ =x1 ,!vc.j v_Aux o.,vN,ov°,=ojc c= TUNE. ,N ========E i======"== "==="===== "====="=== I_LIN N =="="===== N ===="===== N !!!!!!_ N N !!!!!!!!!!!!!!!!!!! N N N ========== N ========== N d= O Processor indicators Lights _) DIGITAL or MATRIX VIRTUAL, 1, with a cursor. STEREO Lights settings.
This unit has been designed field quality to provide with a 5-speaker fight speakers, using main rear left and right speakers speaker. If you use different different tonal moving human qualities) brands in your system, We recommend from the same manufacturer Referto left and the following diagram when you place the speakers. and a center of speakers voice and other types shift smoothly.
Ek'!".t=r__YN:1:B.'!_lll]" Be sure to connect the left channel (L), fight channel faulty, no sound will be heard from the speakers, will be unnatural and lack bass. • Use speakers with the specified ° Do not let the bare speaker impedance (R), "+" (red) and "-" (black) and if the polarity of the speaker properly. connections If the connections is incorrect, are the sound shown on the rear panel of this unit. wires touch each other or any metal part of this unit.
Main speaker Right Left Center speaker 0 0 0 (RX-V530) ® 0 0 Right Left Rearspeaker Subwoofer system The diagram shows the speaker layout in the listening room.
Ek'!".t=rzlN:1:B.'!_lll]" • IMPEDANCE SELECTOR switch WARNING Do not change setting of the IMPEDANCE SELECTOR switch the unit. If this unit fails to turn on when STANDBY/ON SELECTOR switch may not be fully slid to either this unit is in the standby position. when the power (or SYSTEM POWER) If so, slide the switch of this unit is on, this may damage is pressed, the IMPEDANCE all the way to either position when mode.
• Connecting to digital jacks This unit has digital jacks digital signals through You can use the digital Do not connect mains this unit or other components power until all connections components Some methods ° When components digital require different ° connect jacks to input PCM, Dolby Digital All digital sampling digital input jacks are acceptable signals. that is to other YAMAHA • The OPTICAL connection jack names.
I[_i'li'ffl_lNi'F • Connecting Connect Refer • to the connection examples the VIDEO on the next page. Types of video jacks There are three types of video jacks as follows: jack Connect O composite video signal.
_ioli'li'l_iloli'F OPTICAL OUTPUT Another video component AU_ .
IPiqi'ffl_lNi'F • The AUDIO jacks are available for an CD recorder or MD recorder which does not have optical digital input or output • Connecting a CD player Connect the coaxial to the DIGITAL digital INPUT output jack. jack on your CD player CD jack. • The AUDIO jacks are available for a CD player which does not have coaxial digital output jack.
_ioli'ffl_iNi'F Both AM and FM indoor unit. In general, antennas these antennas are included should provide with this sufficient signal strength. Connect each antenna terminals. correctly (included) AM loop antenna _ • Connecting the AM loop antenna [] Set up the AM loop antenna, then connect it. to the designated Indoor FM antenna (included) i (RX-V530) [] Ground (GND terminal) For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground.
IPi'li'ffl_li'li'F This unit is equipped with 6 additional left and right, CENTER, input jacks SURROUND (MAIN left and fight and VOLTAGE SELECTOR SUBWOOFER) for discrete multi-channel input from an external decoder, sound processor, or pre-amplifier. Connect the output jacks 6CH INPUT jacks. on your external outputs to the left and fight input jacks surround channels.
_ioli'ffl_iNi'F When all connections are complete, turn on the power of this unit. [] Press STANDBY/ON (SYSTEM POWER on the remote control) to turn on the power of this unit. or Front panel The level of the main DSP program [] Remote control volume, name appear Turn on the video and then the current on the front panel display. monitor connected to this unit.
This unit has 5 SPEAKER configuration SET items on the SET MENU and their size. The following as well as other possible that you must set according table summarizes these SPEAKER to the number SET items, of speakers in your and shows the initial settings settings. If the initial settings shown in the following table are not appropriate for your speaker configuration, see "1 SPEAKER SET" on pages 41-42 to change the settings.
This section explains how to adjust using the test tone generator. complete, the output speaker When level heard at the listening should be the same from each speaker. for best performance and the various Logic, Dolby output of the digital decoders (Dolby Pro Logic levels this adjustment is sound position panel and TREBLE to the center the volume test tone. field processor, Dolby Set the BASS front This is important Digital, [] II and DTS).
[] Adjust the level of the effect speakers using < / ) so that it matches the level of the main speakers. While adjusting, the test tone is heard from the selected speaker. • To adjust the level (or VOLUME of the main speakers, +/- on the remote use VOLUME When adjustment is complete, press TEST to stop the test tone.
1 3 : : ): : :; : : ::; 5 3 [] Press INPUT <1/[> repeatedly (one of the input selector buttons on the remote control) to select the input source. The selected input source name and input mode appear on the front panel display for a few seconds. ..................................... O0 ([_ m_/cD_ _v_ TuNE_ _-IV/CSL _AUX 0r 6 5 Front panel VCR Remote control V-AUX D]V/CB_ O_ MD/CDR TUNER CO VOLt_aE ,,!!!!!! ........
II :Y_,g:.][e,l ".lW,_| "dr.P_T¢.]; [] Start playback on the source or select a broadcast station component. Refer to the operation BGV (background The BGV function instructions from a video for the source. component. Adjust • the volume The volume level is displayed Example: Control to the desired source together For example, digitally. video) function you to enjoy video images with sounds from an audio you can enjoy music while having beautiful on the video monitor. level.
• This unit comes with a variety the type of input signals input jacks. You can select you desire. Each time you turn on the power mode is set according the SET MENU • of this unit, the input to "8 INPUT MODE" setting on The digital signals.
I :Y_,_:'][e,l ".lf ,_| "d:P_T_ ; You can enhance DSP program. 29 to 33. your listening experience For details about by selecting each program, a see pages ire] After selecting the desired program, press the same button repeatedly to select the desired sub-program if available. Example: Pressing MOVIE THEATER 1 repeatedly switches the sub-program between "Sci-Fi" and "Spectacle".
• Selecting PRO LOGIC IT [] You can enjoy the 2-channel sources decoded into five discrete channels by selecting PRO LOGIC 1Tin program No. 9. Press SELECT repeatedly to select the decoder; PRO LOGIC or PRO LOGIC H. ROCK _/_S--sE_CT PROGRAM _ OOOO MAT_IX_I STEREO After selecting on the decoder (PRO LOGIC 11), select the mode appropriate for the source by pressing DB/DTS SUR.
I :Y_,g:'][e,l ".lW,_t "d:P_T_ ; • • Playing Dolby Digital Surround EX or DTS ES software Press MATRIX 6. l to turn on the Dolby 6.1 or DTS + Matrix 6.1 decoder. Digital SILENT CINEMA You can enjoy a powerful + Matrix DSP sound field similar to what you could expert from actual speakers with SILENT CINEMA DSR You can listen to SILENT CINEMA by connecting while your headphones the digital sound to the PHONES field processor DSP jack is on.
A sound field is defined particular space." early reflections produced as the "characteristic In concert and reverberations by the artist(s). other reverberations each venue venues, as well as the direct The variations among its special sound reflections halls and other music of a we hear sound in the early reflections the different music and recognizable venues and is what gives sound quality.
Filmmakers intend even farther back, the images for the dialog is an upgraded integrates the DTS, Dolby programs to provide CINEMA-DSP a surround so the listener sound In addition Surround the listener. sound of YAMAHA sound field.
The 6-channel soundtracks using matrix processing. localization sound • that 6-channel designed Digital found on 70-mm This unit's MOVIE soundtracks for movie theaters or DTS technology THEATER precise sound programs do. The built-in Dolby a dynamic sound field localization provide Digital into your home. With this unit's to recreate Dolby Digital/DTS film produce or DTS decoder MOVIE theater.
• For movie programs: This unit automatically format. chooses No. 7 to 9 the appropriate decoder and DSP sound field pattern according to the input signal Table of Program Names for Each Input Format put No. 7 8 Program _ MOVIE THEATER 1 2 Stereo channel MOVIE THEATER 2 9 5.1 channel DOLBY DIGITAL 6.1 channel * DTS DOLBY DIGITAL DTS Matrix 6.1 Matrix 6.1 70 mm Spectacle DGTL Spectacle DTS Spectacle Spectacle 6.1 Spectacle 6.1 70 mm Sci-Fi DGTL Sci-Fi DTS Sci-Fi Sci-Fi 6.
The following list gives you a brief description mind that most of these are precise feel sounds best regardless No. 7 digital of the sound fields produced recreations of actual of the name and description acoustic Keep in Select the DSP program that you given for it below. Features Program MOVIE THEATER by each of the DSP programs. environments. Spectacle 1 This program precisely field incredibly Surround, Sci-Fi creates reproduces real.
[] There are 2 ways to tune; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. • Automatic Press PRESET/TUNING <1 / D once to begin automatic tuning. Press D to tune in to a higher frequency, or press <1 to tune in to a lower frequency. P_ESETKUNIHG _ VCR tuning i::i V=ALIX [_TV/_ i::it',1 DVD MO/Cg_I TUNER I 4.4.
iqi'lli'l• • Automatically presetting stations (for FM stations) You can use the automatic FM stations. This function automatically preset tuning feature enables this unit to tune in to FM stations to store with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order. This feature enables you to easily tune in to any preset number station by selecting the preset station (see page 37). Press FM/AM to select the FM band. F_AM ,"" i'i i" i'.
11|_ll7ffF • Manually presetting groups) [] stations You can also store up to 40 stations (8 stations x 5 Press PRESET/TUNING preset station "MEMORY" manually. indicator Press I> to select Press <3 / [> to select number (1 to 8) while a the is flashing. a higher preset station number. <3 to select a lower preset station number. ! VCR V-AUX _W/C_ DVD M0/C0_ TUNER % 2,5 [] Tune 4 3 vcn V-AUX [] pro M0/CC_ TUNEr CO _"t _"thi r"i I I _.' ",J '.
iqi'lli'l• You can tune any desired preset station number station under simply by selecting the which it was stored. You can exchange The example exchanging 2 the assignment below describes preset station "El" 1 of two preset the procedure stations. for with "A5". 2,4 1,3 1,3 [] Tune in to preset station "El" by using the A/B/C/DIE and PRESET/TUNING <_ / _>. See "Tuning in to a preset station" at left.
Use this feature standby to automatically set this unit in the mode after the amount sleep timer is useful of time you have set. The when you are going to sleep while this unit is playing or recording a source. also automatically turns off the external connected to AC OUTLET(S). The sleep timer • Press SLEEP appears component(s) After a few seconds, "SLEEP" The sleep timer repeatedly on the front can only be set with the remote control.
Recording adjustments performed from the recording operation instructions and other operations components. are Refer to the for these components. 1 • Do a test recording • When 2 before you start an actual this unit is set in the standby between the components • The setting of BASS, connected TREBLE, • A given input channel.
The SET MENU consists of 10 items including the speaker mode setting. Choose the appropriate item and adjust or select the values as necessary. _%• You can adjust the items on the SET MENU while playing a Adjustment should be made with the remote control. source. Items 1 Initial settings SPEAKER SET A B C D CENTER MAIN REAR LR BASS LRG (large) LARGE LRG (large) BOTH E MAIN Lv Nrm (Normal) 2 LFE LEVEL SP/HP 0 dB 3 SP DLYTIME 0ms 4 D.
t=ilft_l=f='P Press < / > repeatedly to change the setting of the item. Use this feature speaker Press A/v repeatedly until the menu disappears or simply press one of the DSP program group buttons to exit SET MENU. ROCK _ 00_0 to select suitable • When 96-kHz sampling digital some items are not affected. • When output modes for your configuration. 6CH INPUT adjustments signals is selected in items are input to this unit, as the input 1A through source, level 1D are not affected.
• 1B MAIN (main speaker Choices: LARGE, mode) • SMALL decodes LARGE Select this if you have large range 1D BASS (LFE/bass LFE signals main speakers. of the main left and fight channel signal a Dolby Digital signals The entire are defined frequency is directed to the main left and right speakers. carry low-frequency out mode) effects when this unit or DTS signal. Low-frequency as 90 Hz and below.
Use this feature to adjust (low-frequency effect) channel Dolby Digital Control range: SPEAKER special back a setting: Press via effect sound which carries Use this feature the is only added to etc. Ideally, center ..... -20 to 0 dB speaker By delaying 0 dB to select the item to be adjusted. the center speaker However, is placed Press < to adjust the LFE level. the LFE level according or headphones.
I"l'illt_l_i'l' Use this feature is effective to adjust the dynamic range. only when this unit is decoding This setting Dolby Digital signals. Choices: MAX, STD (standard), It is possible to assign jacks according to be used if this unit's COMPONENT or DIGITAL MIN (minimum) names MAX it possible Select the "MAX" for feature films. connect for general jack settings differ from that component. to change the jack assignment (component This makes and effectively more components.
Use this feature connected to designate to the DIGITAL the input mode INPUT jacks on this unit (see page 25 for details for sources when you turn about the input mode). Choices: AUTO, LAST AUTO Select this to allow this unit to automatically detect type of input signal and select the appropriate the input mode. LAST Select this to set this unit to automatically input mode used for the respective • select the last source.
In addition to controlling manufacturers. this unit, the remote To control • Controlling The shaded areas when the AMP AMP mode. below mode other components, control can operate this unit can be used is selected. Press other A/V components you must set up the remote to control this unit AMP to select the Controlling The shaded components. depending -in the dotted lines (SYSTEM POWER, STANDBY, SLEER 6CH INPUT, VOLUME +/- and MUTE) function in any mode.
_t_fe_E_E_e]AvEE_e]IE_T_WlEI_i_ You can control other components by setting a manufacturer code. Codes can be set for each of the 9 component controls. The following table shows factory-set component (Library: component category) and the manufacturer code for each component control.
I,:t:FAr/[l]l.,IGJ[l]L*qlt_,{l]ll.7._r:|ll];t_ You can operate other components when you have set the manufacturer code for your component. Note, however, that some buttons may not operate your component. Once you select an input source, the remote control switches to the mode for operating the component.
You can adjust the output level of each effect speaker (center, rear left and fight, to a source. Adjustment should and subwoofer) [] while listening Press < / > to adjust • The control right speakers be made with the remote • The control to -20 dB. control. the speaker output level. range for the center or rear left and is from +10 dB to -10 dB.
You can adjust the time difference of the sound from the main the sound effect value, between speakers from the rear speakers. the later the sound time can be individually The following CONCERT 2. JAZZ 3. ROCK 4. DISCO HALL CLUB The delay delay time. 45 15 26 36 CONCERT VIDEO 21 5. TV SPORTS 10 6. MONO 69 7. 70 mm SPECTACLE 23 DGTL 15 MOVIE SPECTACLE SPECTACLE Spectacle 15 6.1 15 70 mm SCI-FI 20 Sci-Fi 6.
You cannot change parameter GUARD" on the SET MENU You can adjust the values of PRO LOGIC lI Music parameters so the sound fields are recreated accurately in your listening room. Adjustments should be made with the remote Memory values when "10 MEM. is set to ON. back-up The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby control. mode, the power outlet, or the power power failure.
Refer to the chart below when this unit does not function properly. If the problem below or if the instruction below does not help, set this unit to the standby contact the nearest authorized YAMAHA dealer or service center.
iiPlq:l_-Wlqqili'l _ Problem Cause Remedy Refer to page The sound suddenly goes off. The protection circuit has been activated because of a short circuit, etc. Check the IMPEDANCE SELECTOR switch is set to the appropriate position and then turn this unit back on. Check the speaker wires are not touching and then turn this unit back on. Only the speaker on one side can be heard. No sound effect from the The sleep timer has functioned. Turn on the power, The sound is muted.
Problem Cause Refer Remedy to page A "humming" sound can be heard. Incorrect The volume The component connected to the OUT (REC) jacks of this unit is turned off. level cannot be increased, or the sound is distorted. cable connections. Turn on the power to the component. The sound effect cannot be recorded. It is not possible to record the sound effect by a recording component. A source A source component is not connected to the DIGITAL INPUT jacks of this unit.
iil'lq:l_-Wl'l'tili'l • _ Tuner Problem Cause Remedy Refer to page FM stereo reception is noisy. The characteristics of FM stereo Check the antenna broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Use the manual There is distortion, and There is multipath interference. good the automatic method. 34 tuning method. Use the manual The desired station cannot be tuned in with The signal is weak or the antenna connections are loose.
• • Dolby Surround Dolby Surround to reproduce uses a 4 channel realistic analog and dynamic left and right channels (stereo), sound 2 main (monaural), and a rear channel effects (monaural). The rear channel within Dolby a narrow Surround for special reproduces range.
_r=pJ-l-'Mil' • Virtual CINEMA YAMAHA has developed algorithm • CINEMA DSP effects even without any rear speakers transmitted by using rear speakers. It is even possible minimal to enjoy virtual 2-speaker system CINEMA DSP using a that does not include a center speaker. • PCM (Linear PCM) PCM is a signal format audio signal is digitized, using any compression.
AUDIO SECTION FM SECTION • Minimum RMS Output Power for Main, Center, Rear 20 Hz to 20 kHz, 0.06% THD, 8 f_ [U.S.A. and Canada models] .............................................. [Other models] .................................................................... 1 kHz, 0.06% THD, 8 [U.S.A. and Canada models] .............................................. [Other models] .................................................................... • Tuning Range [U.S.A. mad Canada models] .......................
LIST OF MANUFACTURER T_ A TANDY ABEX ADM1RA ADVENTURA A1KO A1WA AKA1 ALBA ALLERON AMBASSADOR AMSTRAD ANAM 094 t 1151 1141 1131 1121 148t 0331, t 101, 1t 1t 043t t09t 1081 0481, 1081 0251, 1041, 1051, t06t, 1071 ANAM NATIONAL 104t AOC 0361, t021, 1031, 111 t, t 16t ARCHER 1161 AUD1OSONIC 1001 AUD1OVOX 1051, t 161 BAUER 0441 BAUR 100t BEIJING 15tl, 155t, 1561 BELCOR 103t BELL & HOWELL 098t, 0991 BEON 1001 BRADFORD 105t BROCKWOOD 103t BROKSONIC 1161 BUSH 1001 CANDLE 0351, 0361, 0961, 0971, tlt1,1t3t CAPEHART
SONTEC100t CAB LE TV SON Y 0371,0451,0661, 0256, 0376 084t, 095t, 1281,ABC ANTRONIX 0t36 t44t 0t 36, 0286 SOUNDES1GN 0861, 096t, 1051,ARCHER BBT 0076 1091 CABLETIME 0t66 SOUNDWAVE 100t CABLEV1SION 0t96 SPECTRICON t161 COLOUR VOICE 0306, 0346 SQUAREVIEW 048 t COMTRON1CS 02t6, 0276 SSS 1031, 105t EAGLE COMTRON1CS STAR-LITE 105 t 0276 SUPREM0951 EASTERN 0066 SUPRE-MACY 113t ELECTRICORD 0206 SURPA 0351,097 t SYLVANIA 0101, 0361, 0441,ELECTUS 0266 0t 16, 0126 058t, 0591, 0601,GE 061 t,063t, 0961,GEC CABLE SYSTEM
MULT1TECH 0852, NAD 0442 0992 NEC 0122, 0202, 0292, 0422, 0432, 0542, TEAC 0992 TECHNICS 0932 TEKNIKA 0322, 0912, 0932, ACOUSTIC 0632 TELEFUNKEN 0252 09t2 TMK 0212, NOBLEX 0922 OLYMPUS 04t2, 0932 OPTIMUS 0442, 0472, 09t2 OPTONICA 0402 ORION 02t2, 0722, 0742, 0732, 0772, 0062, 0302, 0342, 0622, 0682, 0712, 0922 TOSHIBA 0762 TOTEV1S1ON 0912, 0772 UNITECH 0922 OSAKI 0912 VECTOR PANASONIC 0012,0052,0092, 0922 REVOX 1175 1295 ROTEL 0215 ADC 0025
TAPE DECK AIWA AKA1 CARVER DENON FISHER GARRARD JVC (VICTOR) KENWOOD MAGNAVOX MARANTZ MITSUB1SH1 OPTIMUS ONKYO PH1LIPS PIONEER REVOX SANSUI SHARP SHERWOOD SONY TEAC TECHNICS WARDS YAMAHA IV 0094,02t4,0224 0184 0094 0304 0144 0194,0204 0274,0284,0294 0124, 0134, 0154, 0234,0244,0264 0094 0094,0344 0184 0034, 0064, 0204, 0334 0364,0374 0094 0034, 0044, 0064 0354 0094,0344 0264 0334 0054,0084,0324 0194,0254 0074,03t4 0034 0004, 00t4, 0104, 0114,0t64,0174, 0264
OYAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIE 90620, U,S,A, CANADA MUSIC LTD. 135 MILNER AVE,, SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELUNGEN BE1 HAMBURG, F.R, OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B.