Owner's Manual

Table Of Contents
En 80
Speaker
Configures the speaker settings manually.
Default settings are underlined.
Configuration
Configures the output characteristics of the speakers.
When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm
(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
(RX-V579 only)
Selects a speaker system.
In addition to the 5.1- or 7.1-channel speaker system, various speaker
configurations are possible using the Zone B speakers or bi-amp connection.
Settings
Selects whether or not a subwoofer is connected.
Settings
Selects the size of the front speakers.
Settings
“Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
Selects whether or not a center speaker is connected and its size.
Settings
Power Amp Assign
Basic
Select this option when you use a normal speaker system (not using
Zone B speakers or a bi-amp connection).
BI-AMP
Select this option when you connect front speakers that support
bi-amp connections (p.17).
Zone B
Select this option when you use Zone B speakers (p.68) in addition to
the speaker system in the main zone (Zone A).
Subwoofer
Use
Select this option when a subwoofer is connected.
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
None
Select this option when no subwoofer is connected.
The front speakers will produce LFE (low-frequency effect) channel
audio and low-frequency components from other channels.
Front
Small
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Crossover”).
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
Center
Small
Select this option for small speakers.
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
00_RX-V479_V579_om_U.book Page 80 Wednesday, March 25, 2015 9:59 AM