AV Receiver Owner's Manual Read the supplied booklet “Safety Brochure” before using the unit.
CONTENTS BEFORE USING THE UNIT 5 4 5 Accessories................................................................................................ 5 Connecting the FM/AM antennas.................................................... 28 Preparing for connecting to a network........................................... 29 Connecting a network cable.............................................................................................................................................
Selecting the sound mode..................................................................... 49 Enjoying stereoscopic sound fields (CINEMA DSP 3D)............................................................................................ 50 Configuring playback settings for different playback sources (Option menu)......................................................................................... 78 Enjoying unprocessed playback.......................................................................
Troubleshooting................................................................................... 109 First, check the following:................................................................................................................................................ 109 Power, system and remote control............................................................................................................................... 109 Audio................................................................
BEFORE USING THE UNIT Accessories Remote control Check that the following accessories are supplied with the product. The supplied remote control is used as follows. £ AM antenna Insert the batteries £ FM antenna Insert the batteries the right way round. * One of the above is supplied depending on the region of purchase.
FEATURES What you can do with the unit The unit is equipped with full of useful functions. Supports 2- to 7.1-channel speaker system You can enjoy your favorite acoustic spaces in various styles. YPAO automatically optimizes the speaker settings to suit your room. • “Optimizing the speaker settings automatically (YPAO)” (p.33) CINEMA DSP allows you to create stereo or multichannel sounds with the sound fields like actual movie theaters and concert halls in your own room.
The ECO mode (power saving function) allows you to create an eco-friendly home theater system Connecting various devices Surround playback with 5 speakers placed in front When the ECO mode is enabled, you can reduce the unit's power consumption. A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, portable audio player, and other devices. • “ECO Mode” (p.
Easy operation with a TV screen Useful applications You can operate the USB storage device, view information, or easily configure the settings using the on-screen menu. The useful application for connections and operations of the unit is as follows. Auto Rename function • “Setting the MusicCast” (p.45) AV CONTROLLER is an application that assists you with various operations of AV Receiver without the remote control.
Part names and functions The part names and functions of the unit and the supplied remote control are as follows. Front panel 1 3 2 4 5 6 7 8 9 0 A DIRECT YPAO MIC INFO (WPS) MEMORY PRESET FM AM TUNING VOLUME SCENE BD DVD PHONES INPUT TONE CONTROL NET TV RADIO STRAIGHT PROGRAM SILENT CINEMA B 1 z (power) key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.
Front display (indicators) 1 2 3 4 ENHANCER STEREO TUNED CHARGE 6 5 OUT 1 2 ECO 7 8 PARTY SLEEP MUTE ZONE ZONE 2 A 3 B VOL. ADAPTIVE DRC VIRTUAL 9 0 1 HDMI Lights up when HDMI signals are being input or output. OUT Lights up when HDMI signals are being output. 2 ENHANCER Lights up when Compressed Music Enhancer (p.53) is working. 3 CINEMA DSP Lights up when CINEMA DSP (p.50) or CINEMA DSP 3D (p.50) is working. 4 STEREO Lights up when the unit is receiving a stereo FM radio signal.
Rear panel 3 2 1 4 6 5 LESS HDMI OUT HDMI HDCP2.2 NETWORK (HDCP2.2) (NET) ARC 1(BD/DVD) 2 3 4 ANTENNA FM (RADIO) AM 75 Ω SPEAKERS CENTER FRONT VIDEO SURROUND SURROUND BACK/PRESENCE /BI-AMP/ZONE B SINGLE MONITOR OUT 1 OPTICAL (TV) AUDIO 1 COAXIAL COAXIAL AUDI0 2 AV 1 AV 2 AV 3 7 ▪ The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections.
Remote control 1 1 Remote control signal transmitter Transmits infrared signals. 2 3 ZONE B A SLEEP SCENE 4 Operate the FM/AM radio when “TUNER” is selected as the input source (p.54). 2 SLEEP key ZONE A BD DVD TV STRAIGHT DIRECT 5 NET RADIO Pressing this key repeatedly will specify the time (120 min, 90 min, 60 min, 30 min, off), in which the unit switches to the standby mode. 3 ZONE switch ENHANCER BASS Enable/disable the audio output to Zone A or Zone B (p.74).
PREPARATIONS General setup procedure 1 Placing speakers................................................................................................................................ (p.14) 2 Connecting speakers........................................................................................................................ (p.21) 3 Connecting a TV/playback devices.................................................................................................. (p.23) 4 Connecting the FM/AM antennas.
1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout examples. Notice ▪ (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” (p.20). ▪ (Except for U.S.A.
Typical speaker layouts Note n 5.1.2-channel system (using presence speakers) ▪ “5.1.2-channel” denotes “standard 5.1-channel plus 2 for overhead speaker channels”. For details on how to place overhead speakers (presence speakers), see “Presence speaker layout” (p.19). This speaker system uses the presence speakers to produce a natural 3-dimensional sound field, and also creates Virtual Surround Back Speaker (VSBS) using the surround speakers to add a sense of depth to the rear sound field.
Note n 7.1-channel system This speaker system creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce a 3-dimensional sound field, and also allows you to enjoy extended surround sounds using the surround back speakers. ▪ When using only one surround back speaker (6.1-channel system), place it straight behind the listening position (middle of 6 and 7 in the diagram). ▪ You can connect two subwoofers (with built-in amplifier) to the unit.
Other speaker layouts The following speaker layouts are also available. n 5.1 system (front 5.1-channel) n 5.1-channel system (using surround speakers) n 5.1 system (front 5.1-channel) (using presence speakers) E 1 2 1 4 9 3 9 4 R 1 2 2 5 9 3 3 5 10° to 30° 10° to 30° Note Note ▪ You can enjoy surround sound even without the center speaker (front 4.1-channel system). Note ▪ To utilize this configuration, set “Virtual CINEMA FRONT” (p.88) in the “Setup” menu to “On”.
n 2.1-channel system n 3.1-channel system 1 9 2 1 3 2 9 Note Note In addition to this speaker layout, you can use bi-amp connections or the Zone B function that allows you to play back an input source in another room (Zone B). For details, see “Playing back more high-quality sounds with bi-amp connections” (p.72) or “Playing back music in multiple rooms” (p.73).
Presence speaker layout n Dolby Enabled SP The unit provides three layout patterns for presence speakers (Front Height, Overhead and Dolby Enabled SP). Choose a layout pattern that suits your listening environment. Use the Dolby Enabled speakers as the presence speakers. Note It utilizes sounds reflected from ceiling and lets you enjoy overhead sounds only from speakers that are placed at the same level as traditional speakers.
n Notes on installation of ceiling speakers Setting the speaker impedance When installing presence speakers to a ceiling, install them just above the listening position, or the ceiling between the extensions of the front speakers and listening position. (U.S.A. and Canada models only) FPR Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to “6 Ω MIN”.
2 Connecting speakers Connect the speakers placed in your room to the unit. The following diagrams provide connections for 5.1- and 7.1-channel system as an example. For other systems, connect speakers while referring to the connection diagram for the 5.1‑channel system. Notice ▪ Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers. ▪ The speaker has the polarity (+/-).
Connecting speaker cables Connecting the subwoofer (with built-in amplifier) Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminal. Use an audio pin cable to connect the subwoofer.
3 Connecting a TV/playback devices The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect a Bluetooth device or a USB storage device, see the following pages. • Connecting a Bluetooth device (p.59) • Connecting a USB storage device (p.63) n Video jacks HDMI jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. HDMI cable Transmit analog video signals.
Connecting a TV n Composite video connection Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. When connecting any video device with a video pin cable, connect the TV to the MONITOR OUT (VIDEO) jack. To maximize the performance of the unit, we recommend connecting a TV with an HDMI cable. Note n HDMI connection ▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI.
Connecting video devices (such as BD/DVD players) n Composite video connection Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the unit. Depending on the video/audio output jacks available on your video device, choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack. Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial or stereo pin cable).
n Changing the combination of video/audio input jacks 3 If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device. You can connect a video device that has the following video/audio output jacks. Output jacks on video device Press OPTION.
Connecting audio devices (such as CD players) Connecting to the jack on the front panel Connect audio devices such as CD players and MD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. Use the AUX jack on the front panel to temporarily connect devices such as portable audio players to the unit. Audio output jacks on audio device Before making a connection, stop playback on the device and turn down the volume on the unit.
4 Connecting the FM/AM antennas Connect the supplied FM/AM antennas to the unit. Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface. FM antenna AM antenna LESS HDMI OUT NETWORK HDMI (HDCP2.2) HDCP2.
5 Preparing for connecting to a network Connect the unit to a router (access point) with a network cable, or prepare the wireless antenna for establishing a wireless network connection. Note You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit.
6 Connecting the power cable Warning (Taiwan, Brazil and General models only) Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential fire hazard. Before connecting the power cable Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110– 120/220–240 V, 50/60 Hz.
7 Selecting an on-screen menu language Select the desired on-screen menu language. 1 2 6 Press z (receiver power) to turn on the unit. Note The information on the front display is provided in English only. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). Note ▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display.
8 Configuring the necessary speaker settings If you use any of the following speaker configurations, follow the procedure below to configure the corresponding speaker settings manually before performing YPAO. • Using surround back speakers (p.16), bi-amp connection (p.72) or Zone B speakers (p.73) • Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT) (p.17) • Using the presence speakers for Dolby Atmos or DTS:X playback (p.19) 1 2 Press z (receiver power) to turn on the unit.
9 Optimizing the speaker settings automatically (YPAO) The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. 4 Place the YPAO microphone at your listening position and connect it to the YPAO MIC jack on the front panel. Note Note ▪ When you use the front 5.
5 7 To start the measurement, use the cursor keys to select “Start” and press ENTER. Use the cursor keys (e/r) to select “SAVE” and press ENTER. Auto Setup The measurement will start in 10 seconds. Press ENTER to start the measurement immediately. Start Exit < SAVE > Note To stop the measurement temporarily, press RETURN and follow the procedure in “Error messages” (p.35). The following screen appears on the TV when the measurement finishes. The adjusted speaker settings are applied.
Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Error message Cause E-1:No Front SP Front speakers are not detected. (E-1:NO FRNT SP) Auto Setup ERROR E-9 : User Cancel E-2:No Sur. SP Error message (E-2:NO SUR SP) < RETRY > 2% E-3:No F.PRNS SP (E-3:NO FPR SP) E-4:SBR → SBL TV screen (E-4:SBR → SBL) ENHANCER STEREO TUNED CHARGE OUT SLEEP MUTE One of the surround speakers cannot be detected.
Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. Warning message Cause Check the cable connections (+/-) of the problem speaker. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. If the speaker is connected incorrectly: Auto Setup Measurement Finished Result W-1:Out of Phase 3 / 2 / 0.1 ch 3.0 / 10.5 m (W-1:PHASE) -3.0 / +10.
10 Connecting to a network wirelessly Connect the unit to a wireless router (access point) or a mobile device by establishing a wireless connection. n Connecting without a wireless router (access point) Connect a mobile device to the unit directly. Note You can use the application for smartphone / tablet “AV CONTROLLER” (p.8) to control the unit from mobiles devices or enjoy music files stored on mobiles devices on the unit.
Connecting the unit to a wireless network 6 There are several methods to connect the unit to a wireless network. Select a connection method according to your environment. Use the cursor keys (e/r) to select “Wireless(Wi-Fi)” and press ENTER. Network Connection Connection • The connection setting to MusicCast network. – “Setting the MusicCast” (p.45) Connect to router over wired connection. • The connection settings on iOS devices – “Sharing the iOS device setting” (p.
10 n Using the WPS button configuration Select the network (access point) of which you want to share the settings with the unit. You can easily set up a wireless connection with one push of the WPS button. 1 2 Tap here to start setup The network currently selected Hold down INFO (WPS) on the front panel for 3 seconds. “Press WPS button on Access Point” appears on the front display. 3 Push the WPS button on the wireless router (access point).
n Using other connection methods 7 If your wireless router (access point) does not support WPS button configuration method, follow the procedure below to configure the wireless network settings. Use the cursor keys (q/w) to select the desired connection method and press ENTER. Wireless(Wi-Fi) 1 2 Select a setup method. Press z (receiver power) to turn on the unit.
4 Searching for an access point If you select “Access Point Scan” as the connection method, the unit starts searching for access points. After a while, the list of available access points appears on the TV screen. 1 When the connection process finishes, “Completed” appears on the TV screen. If “Not connected” appears, repeat from step 1 or try another connection method. Use the cursor keys (q/w) to select the desired access point and press ENTER.
4 Setting up the wireless connection manually If you select “Manual Setting” as the connection method, the wireless connection setting screen appears on the TV. Note You need to setup the SSID (network name), encryption method and security key for your network. If you select “None” in step 3, this item is not available. 5 Manual Setting Use the cursor keys and ENTER to enter the security key. If you select “WEP” in step 3, enter either 5 or 13 character string, or 10 or 26 hexadecimal digits.
Connecting a mobile device to the unit directly (Wireless Direct) Using the WPS PIN code If you select “PIN Code” as the connection method, the list of available access points appears on the TV screen. 1 Follow the procedure below to connect a mobile device to the unit directly. Use the cursor keys (q/w) to select the desired access point and press ENTER. Note Wireless Direct connection may be insecure since the communication is not strongly encrypted.
7 10 Use the cursor keys (q/w) to select “Security” and the cursor keys (e/r) to select the encryption method. Choices This completes the settings and “Completed” appears on the TV screen. None, WPA2-PSK(AES) Next, configure the Wi-Fi settings of a mobile device. 11 Note If you select “None”, the connection may be insecure since the communication is not encrypted. 8 1 2 If you select “None” in step 7, this item is not available. 3 Use the cursor keys and ENTER to enter the security key.
11 Setting the MusicCast MusicCast is a brand new wireless musical solution from Yamaha, allowing you to share music among all of your rooms with a variety of devices. You can enjoy music from your smartphone, PC, NAS drive and music streaming service anywhere in your house with one easy-to-use application. For more details and a lineup of MusicCast compatible products, visit the Yamaha website.
PLAYBACK Basic playback procedure Enjoying playback 1 2 3 Start playback on the external device or select a radio station. Refer to the instruction manual for the external device. Turn on the external devices (such as a TV or BD/DVD player) connected to the unit. For details on the following operations, see the corresponding pages. ▪ “Listening to FM/AM radio” (p.54) ▪ “Playing back music stored on a Bluetooth® device” (p.59) Use the input selection keys to select an input source.
Switching information on the front display 1 Currently input source AV Press INFO repeatedly to select between the various display items. ENHANCER STEREO TUNED CHARGE AUX AUDIO VOL. ECO USB ADAPTIVE DRC VIRTUAL Audio Decoder SERVER Item name Song (song title), Artist (artist name), Album (album name), DSP Program (sound mode name), Audio Decoder (decoder name*) AirPlay About 3 seconds after a display item is selected, its corresponding information appears.
Selecting the input source and favorite settings with one touch (SCENE) The SCENE function allows you to select the assigned input source, sound program, Compressed Music Enhancer on/off, and target zones with just one touch. Registering a scene 1 Selecting a registered scene 1 ▪ Select an input source (p.46) Press SCENE. ▪ Select a sound program (p.49) or straight decode (p.52) The input source and settings registered to the corresponding scene are selected.
Selecting the sound mode I want to enjoy enhanced bass sounds. The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). ZONE A • Enable Extra Bass by pressing BASS (p.53). I want to enjoy listening to compressed music. ZONE B SLEEP • Enable Compressed Music Enhancer by pressing ENHANCER (p.53).
Enjoying stereoscopic sound fields (CINEMA DSP 3D) The unit is equipped with a variety of sound programs that utilize Yamaha's original DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual movie theaters or concert halls in your room and enjoy natural stereoscopic sound fields. Drama This program features stable reverberations that match a wide range of movie genres, from serious dramas to musicals and comedies. The reverberations are modest, but suitably stereophonic.
n Sound programs suitable for music (MUSIC) n Sound programs suitable for stereo playback (STEREO) The following sound programs are optimized for listening to music sources. You can select stereo playback. Hall in Munich This program simulates a Munich concert hall with approximately 2,500 seats that uses stylish wood for the interior finishing. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena.
Enjoying unprocessed playback 1 You can play back input sources without any sound field effect processing. Press PROGRAM repeatedly to select a surround decoder. The previously selected surround decoder is selected. You can change the surround decoder in “Sur.Decode” (p.78) in the “Option” menu.
Enjoying pure high fidelity sound (direct playback) Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer) When the direct playback mode is enabled, the unit plays back the selected source with the least circuitry in order to reduce the electrical noise from other circuitry (such as the front display). It allows you to enjoy Hi-Fi sound quality. 1 Press DIRECT.
Listening to FM/AM radio You can tune into a radio station by specifying its frequency or selecting from registered radio stations. 4 5 Note ▪ The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models. ▪ If you cannot obtain good reception on the radio, adjust the direction of the FM/AM antennas. Press STRAIGHT to select “FM100/AM10”.
2 Registering favorite radio stations (presets) Press TUNING repeatedly to set a frequency. You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. Hold down the key for about a second to search stations automatically.
4 n Registering a radio station manually To start the Auto Preset process, press ENTER. Select a radio station manually and register it to a preset number. “SEARCH” appears during Auto Preset ENHANCER STEREO TUNED CHARGE OUT 1 SLEEP MUTE VOL. ECO 01:FM 87.50MHz ADAPTIVE DRC VIRTUAL 2 Preset number from which to start the registration Follow “Selecting a frequency for reception” (p.54) to tune into the desired radio station. Hold down MEMORY for a few seconds.
n Selecting a preset station n Clearing preset stations Tune into a registered radio station by selecting its preset number. Clear radio stations registered to the preset numbers. 1 2 1 2 3 Press FM/AM to select “TUNER” as the input source. Press PRESET repeatedly to select the desired radio station. ZONE A ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS TOP MENU HOME POP UP/MENU Press FM/AM to select “TUNER” as the input source. Press OPTION.
Radio Data System tuning n Receiving traffic information automatically (U.K. and Europe models only) When “TUNER” is selected as the input source, the unit automatically receives traffic information. To enable this function, follow the procedure below to set the traffic information station. Radio Data System is a data transmission system used by FM stations in many countries.
Playing back music stored on a Bluetooth® device You can play back music files stored on a Bluetooth device (such as smartphones) on the unit. Also, you can enjoy audio played back on the unit using Bluetooth speakers/ headphones. Playback Bluetooth® device music on the unit Follow the procedure below to establish a Bluetooth connection between a Bluetooth device (such as smartphones) and the unit, and play back music stored the Bluetooth device on the unit.
Enjoying audio using Bluetooth® speakers/ headphones Follow the procedure below to establish a Bluetooth connection between Bluetooth speakers/headphones and the unit. 1 Use the input selection keys on the remote control to select an input source. Select an input source other than Bluetooth. 2 3 4 5 Press SETUP. Use the cursor keys to select “Bluetooth” and press ENTER. Use the cursor keys to set “Bluetooth” to “On”, and then set “Transmitter” to “On” in the same way.
Playing back music with AirPlay The AirPlay function allows you to play back iTunes or iPhone/iPad/iPod touch music on the unit via network. Playback of iTunes/iPod music contents Follow the procedure below to play back iTunes/iPod music contents on the unit. iTunes 1 PC Router Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod. If the iTunes/iPod recognizes the unit, the AirPlay icon ( The unit iTunes (example) ) appears.
Note n Playback screen ▪ The playback screen is available only when your TV is connected to the unit via HDMI. ▪ You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network Standby” (p.100) in the “Setup” menu to “On”. 1 AirPlay ▪ You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p.101) in the “Setup” menu. Artist Album ▪ You can adjust the unit’s volume from the iTunes/iPod during playback.
Playing back music stored on a USB storage device You can play back music files stored on a USB storage device on the unit. Playback of USB storage device contents Note For details on playable USB devices, see “Supported devices and file formats” (p.120). Follow the procedure below to operate the USB storage device contents and start playback. Connecting a USB storage device You can control the USB memory device with the menu displayed on the TV screen.
n Playback screen n Browse screen 4 1 2 Blues Classical Electronica Jazz Pop Rock Soundtrack Speaking 1 USB USB - Top Artist Album 5 2 Song 2 : 30 1/9999 3 1 List name 2 Contents list 1 Displays the list of USB storage device contents. Use the cursor keys to select an item and press ENTER to confirm the selection. 3 4 2 Playback information Displays the artist name, album name, song title, and elapsed time.
n Repeat/shuffle settings You can configure the repeat/shuffle settings for playback of USB storage device contents. 1 2 When “USB” is selected as the input source, press OPTION. Use the cursor keys to select “Repeat” (Repeat) or “Shuffle” (Shuffle) and press ENTER. Note ▪ To return to the previous screen during menu operations, press RETURN. ▪ Texts in parentheses denote indicators on the front display. 3 Use the cursor keys (e/r) to select a setting.
Playing back music stored on media servers (PCs/NAS) You can play back music files stored on your PC or DLNA-compatible NAS on the unit. For Windows Media Player 11 Note 1 2 3 ▪ To use this function, the unit and your PC must be connected to the same router (p.29). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.99) in the “Setup” menu. ▪ The audio may be interrupted while using the wireless network connection.
n Browse screen Playback of PC music contents You can control the PC/NAS with the menu displayed on the TV screen. Note 2 ▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. ▪ “_” (underscore) will be displayed for characters not supported by the unit.
n Repeat/shuffle settings n Playback screen You can configure the repeat/shuffle settings for the playback of PC music content. 1 SERVER 1 2 Artist Album 2 Song 2 : 30 When “SERVER” is selected as the input source, press OPTION. Use the cursor keys to select “Repeat” (Repeat) or “Shuffle” (Shuffle) and press ENTER. Note 1 ▪ To return to the previous screen during menu operations, press RETURN. Status indicators ▪ Text in parentheses denotes indicators on the front display.
Listening to Internet radio You can listen to Internet radio stations from all over the world. n Browse screen Note 4 1 ▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. ▪ To use this function, the unit must be connected to the Internet (p.29). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.99) in the “Setup” menu.
n Playback screen 1 NET RADIO Station Album Song 2 2 : 30 1 2 Playback indicator Playback information Displays the station name, album name, song title, and elapsed time. Note ▪ Use the external device operation key (s) to stop playback. ▪ Some information may not be available depending on the station.
Registering favorite Internet radio stations (bookmarks) You can register your favorite Internet radio stations to the “Bookmarks” folder. 3 n Registering the station with the Option menu You can switch the language. Follow the procedure below to register your favorite station to the “Bookmarks” folder. 1 2 Access the vTuner website (http://yradio.vtuner.com/) with the web browser on your PC and enter the vTuner ID. While listening to Internet radio, press OPTION.
Playing back more high-quality sounds with bi-amp connections LESS HDMI OUT NETWORK HDMI (HDCP2.2) HDCP2.2 (NET) ARC 1(BD/DVD) 2 3 4 ANTENNA Using the four internal amplifiers for front speakers allows you to have more highquality sounds. FM (RADIO) The unit (rear) For example, you can use 2-way bi-amplified speakers with a woofer and tweeter for front speakers. It produces expansive sound in bi-amp system featuring a woofer and tweeter.
Playing back music in multiple rooms The Zone A/B function allows you to play back an input source in the room where the unit is installed (Zone A) and in another room (Zone B). Connecting Zone B speakers For example, you can turn on Zone A (turn off Zone B) when you are in the living room, and turn on Zone B (turn off Zone A) when you are in the study room. Also, you can turn on both zones when you want to enjoy the same input source in those rooms simultaneously.
Operating the Zone B 3 n Basic playback procedure Use the input selection keys to select an input source. ZONE A ZONE B SLEEP SCENE BD DVD TV NET RADIO STRAIGHT DIRECT ENHANCER BASS PROGRAM PROGRAM 1 Slide the Zone switch to “ZONE B”.
n Adjusting the volume for Zone B separately n Correcting volume difference between Zone A and Zone B You can separately adjust the volume for Zone B using the remote control when “ZoneB Volume” (p.94) in the “Setup” menu is set to “Async.”. If you are bothered by volume difference between Zone A/B, follow the procedure below to adjust the volume for Zone B. 1 1 2 Press OPTION. Note Slide the Zone switch to “ZONE A” in menu operations. 2 ▪ To mute the audio output to Zone B, press MUTE.
Useful functions Registering favorite items (shortcut) n Registering an item You can register up to 40 favorite USB and network contents as shortcuts and access them directly by selecting the shortcut numbers. Select a desired item and register it to a shortcut number. 1 2 Note ▪ You can also use the “Bookmark” feature to register Internet radio stations (p.71). ▪ Only the input source will be registered for Bluetooth and AirPlay. Individual contents cannot be registered.
n Recalling a registered item Note Recall a registered item by selecting the shortcut number. ▪ The registered item cannot be recalled in the following cases. 1 ▪ “No Presets” appears when no items are registered. – A USB storage device which contains the registered item is not connected to this unit. Press BLUETOOTH, NET or USB. – A PC which contains the registered item is turned off or not connected to the network. – The registered network content is temporarily unavailable or out of service.
Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Option menu items Note ▪ Available items vary depending on the selected input source. Press OPTION. ▪ Text in parentheses denotes indicators on the front display.
Item Function Preset (Preset) Auto Preset Automatically registers FM radio stations with strong signals as presets. p.55 Clear Preset Clear radio stations registered to preset numbers. p.57 Traffic Program (TrafficProgram) n Tone Control (Tone Control) Page Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually. Choices (U.K. and Europe models only) Automatically searches for a traffic information station. p.
n Lipsync (Lipsync) Enhancer (Enhancer) Enables/disables Compressed Music Enhancer (p.53). Enables/disables the adjustment configured in “Lipsync” (p.92) in the “Setup” menu. Note Note This setting is applied separately to each input source. ▪ This setting is applied separately to each input source. ▪ You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer (p.53). Settings Off (Off) Disables Compressed Music Enhancer. On (On) Enables Compressed Music Enhancer.
n Audio In (Audio In) Combines the video jack of the selected input source with an audio jack of others. For example, use this function in the following cases. • Connecting a playback device that supports HDMI video output, but not HDMI audio output Input sources HDMI 1-4, AV 1-4 Setup procedure See “Changing the combination of video/audio input jacks” (p.26). n Video Out (Video Out) Selects a video to be output with the selected audio source.
CONFIGURATIONS Configuring various functions (Setup Menu) You can configure the unit’s various function with the menu displayed on the TV screen. 5 Note ▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. ▪ If new firmware is available, the envelope icon (p) appears in the screen. 1 2 Press SETUP. Use the cursor keys to select a menu and press ENTER.
Setup menu items Menu Item Configuration Speaker HDMI Function Page Power Amp Assign Selects a speaker system. Subwoofer Selects whether or not a subwoofer is connected. p.85 p.85 Front Selects the size of the front speakers. p.85 Center Selects whether or not a center speaker is connected and its size. p.86 Surround Selects whether or not surround speakers are connected and their size. p.86 Surround Back Selects whether or not surround back speakers are connected and their size. p.
Menu Item DSP Parameter Lipsync Sound Dialogue Volume ECO Function Network Bluetooth Page Enables/disables CINEMA DSP 3D. p.92 Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played. p.92 Center Image Adjusts the center orientation level (broadening effect) of the front sound field. p.92 Select Selects the method to adjust the delay between video and audio output. p.
Speaker Configures the speaker settings manually. Subwoofer Note Selects whether or not a subwoofer is connected. Default settings are underlined. Settings n Configuration Select this option when a subwoofer is connected. Use Configures the output characteristics of the speakers. Note The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. Select this option when no subwoofer is connected.
Center Surround Back Selects whether or not a center speaker is connected and its size. Selects whether or not surround back speakers are connected and their sizes. Settings Settings Select this option when one small speaker is connected. Select this option for small speakers. Small Small x1 The subwoofer or front speakers will produce center channel lowfrequency components (configurable in “Crossover”). Select this option for large speakers.
Layout Subwoofer Phase Selects a presence layout when presence speakers are used. This setting facilitates the optimization of the sound field effect. Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the subwoofer phase. Settings Settings Front Height Select this option when presence speakers are installed on the front side wall. Overhead Select this option when presence speakers are installed to the ceiling.
n Level Virtual CINEMA FRONT Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration. Adjusts the volume of each speaker. Settings Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Presence L, Presence R, Subwoofer Off Disables the front 5-channel speaker configuration. On Enables the front 5-channel speaker configuration. Choices Setting range -10.0 dB to +10.0 dB (0.
n Manual equalizer adjustment 1 2 3 Set “EQ Select” to “GEQ”. Use the cursor keys (q/w) to select “Channel” and the cursor keys (e/r) to select the desired speaker channel. Use the cursor keys (q/w) to select the desired band (frequency) and the cursor keys (e/r) to adjust the gain. Setting range -6.0 dB to +6.0 dB 4 To exit from the menu, press SETUP. n Test Tone Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect.
HDMI Configures the HDMI settings. HDMI OUT (TV) Note Enables/disables the audio output from a TV connected to the HDMI OUT jack. Default settings are underlined. Settings n HDMI Control Off Disables the audio output from the TV. Enables/disables HDMI Control (p.122). On Enables the audio output from the TV. Settings Off n Standby Through Disables HDMI Control. Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
n SCENE n Standby Sync Enables/disable SCENE link playback when “HDMI Control” is set to “On”. Select whether to use HDMI control to link the standby behavior of the TV and the unit when “HDMI Control” is set to “On”. When SCENE link playback is enabled, HDMI Control-compatible devices connected to the unit via HDMI automatically works as follows, with a scene selection. Settings Off Does not set the unit to standby mode when the TV is turned off.
Sound Configures the audio output settings. n Lipsync Note Adjusts the delay between video and audio output. Default settings are underlined. Note You can enable/disable the Lipsync function by input sources in “Lipsync (Lipsync)” (p.80) in the “Option” menu. n DSP Parameter Configures the surround decoder settings. Select CINEMA DSP 3D Mode Selects the method to adjust the delay between video and audio output. Enables/disables CINEMA DSP 3D (p.50).
n Dialogue Dialogue Lift Adjusts the volume of dialogue sounds. Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is coming from below the TV screen, you can raise its perceived height by increasing this setting. Dialogue Level Note Adjusts the volume of the center orientation sounds such as dialogue. This setting is available only when one of the following conditions is met.
n Volume Max Volume Configures the volume settings. Sets the limit value of the volume. Setting range Scale -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [50.0 to 95.0 (5.0 increments), 97.0] Switches the scale of the volume display. Settings Initial Volume dB Displays the volume in the “dB” unit. 0-97 Displays the volume in the numeric value (0.5 to 97.0). Sets the initial volume when the receiver is turned on.
ECO Configures the power supply settings. Note Default settings are underlined. n Auto Power Standby Set the amount of time for the auto-standby function. Settings Off Does not set the unit to standby mode automatically. 20 minutes Sets the unit to standby mode when you have not operated the unit and the unit has not detected any input signal for the specified time. 2 hours, 4 hours, 8 hours, 12 hours Sets the unit to standby mode when you have not operated the unit for the specified time. Default U.
Function Configures the functions that make the unit easier to use. Procedure to rename manually Note Default settings are underlined. 1 n Input Rename 2 Changes the input source name displayed on the front display. You can also select a name from the presets or a name created by the Auto Rename function. Use the cursor keys (q/w) to select an input source to be renamed. Use the cursor keys (e/r) to select “Manual” and press ENTER.
n Input Skip n Dimmer Set which input source is skipped when operating the INPUT key. Adjusts the brightness of the front display. You can select the desired input source quickly by using this function. Setting range Input sources -4 to 0 (higher to brighten) HDMI 1-4, AUDIO 1-2, AV 1-4, TUNER, USB, NET, Bluetooth, AUX Note Settings The front display may become dark when “ECO Mode” (p.95) is set to “On”. Off Does not skip the selected input source. On Skips the selected input source.
n Remote Color Key Set the unit's functions for the RED/GREEN/YELLOW/BLUE key of the remote control. Settings Default Assigns the functions of playback devices connected to the unit with an HDMI cable. Assigns the unit's input sources to each key. The assigned input sources can be set separately. Input Input sources HDMI 1-4, AUDIO 1-2, AV 1-4, TUNER, USB, NET, Bluetooth, AUX Default RED: HDMI2, GREEN: HDMI4, YELLOW: AV 2, BLUE: AUX Assigns the functions of sound mode to each key.
Network Configures the network settings. n IP Address Note Configures the network parameters (such as IP address). Default settings are underlined. DHCP n Information Select whether to use a DHCP server. Displays the network information on the unit.
n MAC Address Filter n DMC Control Sets the MAC address filter to limit access to the unit from other network devices. Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback. Note Settings Operation of the AirPlay function (p.61) or the DMC is not limited by this setting. Filter Disable Does not allow DMCs to control playback. Enable Allows DMCs to control playback. Enables/disables the MAC address filter. Note Settings Off Disables the MAC address filter.
n Network Name Bluetooth Edits the network name (the unit’s name on the network) displayed on other network devices. Configures the Bluetooth settings. n Bluetooth Procedure 1 2 3 Enables/disables the Bluetooth function (p.59). Press ENTER to enter the name edit screen. Settings Use the cursor keys and ENTER key to edit the name, and then select “OK” to confirm the new name. Off Disables the Bluetooth function. On Enables the Bluetooth function.
n Audio Send Language Configures the Bluetooth settings when the unit is used as the Bluetooth audio transmitter. Select an on-screen menu language. Note Transmitter Default settings are underlined. Enables/disables the Bluetooth audio transmitter function. Settings When this function is enabled, you can enjoy audio played back on the unit using Bluetooth speakers/headphones (p.60).
Configuring the system settings (ADVANCED SETUP menu) Configure the system settings of the unit while viewing the front display. 1 2 ADVANCED SETUP menu items Set the unit to standby mode. Note Default settings are underlined. While holding down STRAIGHT on the front panel, press z (power). Item SP IMP. z (power) REMOTE ID 3 4 5 STRAIGHT Press PROGRAM to select an item. Page (U.S.A. and Canada models only) Changes the speaker impedance setting. Selects the unit’s remote control ID.
Selecting the remote control ID (REMOTE ID) ENHANCER STEREO TUNED CHARGE OUT Switching the video signal type (TV FORMAT) SLEEP MUTE CHARGE OUT VOL. ECO REMOTE ID••ID1 Change the unit’s remote control ID so that it matches the remote control’s ID (default: ID1). When using multiple Yamaha AV receivers, you can set each remote control with a unique remote control ID for its corresponding receiver. ENHANCER STEREO TUNED SLEEP MUTE VOL.
Checking the firmware version (VERSION) Restoring the default settings (INIT) ENHANCER STEREO TUNED CHARGE OUT SLEEP MUTE CHARGE OUT VOL. ECO INIT••••CANCEL ENHANCER STEREO TUNED SLEEP MUTE VOL. ECO ADAPTIVE DRC VIRTUAL VERSION••xx.xx ADAPTIVE DRC VIRTUAL Restores the default settings for the unit. Check the version of firmware currently installed on the unit. Choices Note ALL Restores the default settings for the unit. CANCEL Does not perform an initialization.
Updating the unit’s firmware via the network New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. A firmware update is available if the following message is displayed after SETUP is pressed. Network Setup Notice New firmware available. ▪ Do not operate the unit or disconnect the power cable or network cable during firmware update.
APPENDIX Frequently asked questions I want to change the input source name... The frequently asked questions from customers and the answers are shown below. The new speaker system does not provide an ideal sound balance... If you have changed speakers or have a new speaker system, use YPAO to optimize the speaker settings again (p.33). If you want to adjust the speaker settings manually, use “Speaker” in the “Setup” menu (p.85). We want to set limitations on the volume control...
I want to hear audio from the TV speakers... Use “Audio Output” in the “Setup” menu to select the output destination of signals input into the unit (p.90). Your TV speakers may be selected as an output destination. I want to change the on-screen menu language... Use “Language” in the “Setup” menu to select a language from English, Japanese, French, German, Spanish, Russian, Italian and Chinese (p.31). I want to update the firmware...
Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: 1 2 3 The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
Problem The unit cannot be controlled using the remote control. Cannot select the desired input source even if “INPUT” is pressed. The RED/GREEN/YELLOW/BLUE keys of the remote control do not operate. Cause Remedy The unit is out of the operating range. Use the remote control within the operating range (p.5). The batteries are weak. Replace with new batteries. The unit’s remote control sensor is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit.
Problem No sound is coming from the surround back speaker. Cause Remedy “Power Amp Assign” is set to “Presence”, “BI-AMP”, “Zone B” or “5.1ch”. When “Power Amp Assign” in the “Setup” menu is set to “Presence”, “BI-AMP”, “Zone B” or “5.1ch”, you cannot use the surround back speakers. To use the surround back speakers, set “Power Amp Assign” to “Sur.Back” (p.85).
Video Problem No video. No video from the playback device (connected to the unit with HDMI). No image (contents required the HDCP 2.2 compatible HDMI device) from the playback device connected to the unit with HDMI. The menu of the unit is not displayed on the TV. Cause Remedy Another input source is selected on the unit. Select an appropriate input source with the input selection keys. Another input source is selected on the TV. Switch the TV input to display the video from the unit.
FM/AM radio Problem FM radio reception is weak or noisy. Cause Remedy There is multi-path interference. Adjust the FM antenna height or orientation, or place it in a different location. Your area is too far from the FM station transmitter. To select monaural FM radio reception “FM Mode” in the “Option” menu to “Mono” (p.54). The noises may be caused by fluorescent lamps, motors, thermostats, or other electrical equipment. It is difficult to completely eliminate noise.
USB and network Problem The unit does not detect the USB device. Cause Remedy The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format. Folders and files in the USB device cannot be viewed. The data in the USB device is protected by the encryption. Use a USB device without an encryption function.
Problem The unit cannot connect to the Internet via a wireless router (access point). Wireless network is not found. Cause Remedy The wireless router (access point) is turned off. Turn on the wireless router. The unit and the wireless router (access point) are too far apart. Place the unit and the wireless router (access point) closer to each other. There is an obstacle between the unit and the wireless router (access point).
Error indications on the front display Refer to the table below when the error message is indicated on the front display. Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.66). The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
Glossary This is a glossary of the technical terms used in this manual. DTS Dialog Control DTS Dialog Control allows you to boost the dialog. This can be useful in noisy environments to help make the dialog more intelligible. People with impaired hearing may also benefit. Note that the content creator may disable the use of this feature in the mix, so that DTS Dialog Control may not always be available.
DSD (Direct Stream Digital) DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224 MHz. The highest frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology offers better audio quality than that used for CDs. FLAC n Others Bi-amplification connection (Bi-amp) A bi-amplification connection uses two amplifiers for a speaker.
Network information YPAO (Yamaha Parametric room Acoustic Optimizer) The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. SSID SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.
File formats Supported devices and file formats The following devices and file formats can be used by the unit. n USB, PC/NAS Supported devices n Bluetooth® devices • Bluetooth devices that support A2DP can be used. • Yamaha does not assure the connections of all Bluetooth devices. n USB devices • This unit supports USB mass storage class devices (e.g., flash memories or portable audio players) using FAT16 or FAT32 format.
Video signal flow Video signals input from a video device to the unit are output to a TV as shown below.
Information on HDMI (Example) The additional information on HDMI is as follows. HDMI Control HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. You can also control playback devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable.
3 8 Use the cursor keys to select “HDMI” and press ENTER. Setup Speaker HDMI Sound ECO Note Function Language RETURN 4 ▪ If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices exceeds the limit. In this case, disable HDMI Control on the devices not in use.
Audio Return Channel (ARC) HDMI signal compatibility ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal to the TV. n Audio signals Check the following after the HDMI Control settings. 1 2 Select a TV program with the TV remote control. Check that the input source of the unit will be automatically switched to “AV 2” and the TV audio will be played back on the unit. If you cannot hear the TV audio, check the following: ▪ “ARC” (p.
Trademarks The trademarks used in this manual are as follows. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, and the double-D symbol are trademarks of Dolby Laboratories. DLNA™ and DLNA CERTIFIED™ are trademarks or registered trademarks of Digital Living Network Alliance. All rights reserved. Unauthorized use is strictly prohibited. Windows™ Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Specifications The specifications of this unit are as follows. HDMI Input jacks HDMI Features: • 4K UltraHD Video (include 4K/60, 50Hz 10/12bit), 3D Video, ARC (Audio Return Channel), HDMI Control (CEC), Auto Lip Sync, Deep Color, “x.v.Color”, HD audio playback, 21:9 Aspect Ratio, BT.
Wi-Fi function • Capable of WPS by PIN Method and Push-Button-Method • Capable of sharing with iOS devices by wireless connection • Capable of Direct Connection with Mobile Device • Available Security Method: WEP, WPA2-PSK (AES), Mixed Mode • Radio Frequency Band: 2.4GHz • Wireless Network Standard: IEEE 802.11 b/g/n USB Capable of Mass Storage Class USB Memory Current Supply Capacity: 1.0 A Bluetooth Sink Function • Source Device to AVR (ex.
Maximum Effective Output Power (1-channel driven) Volume Control • [U.S.A. and Canada models] • Range (1 kHz, 10% THD, 8 Ω) – Front L/R, Center, Surround L/R, Surround Back L/R 140 W/ch (1 kHz, 10% THD, 6 Ω) – Front L/R, Center, Surround L/R, Surround Back L/R 145 W/ch 0.5 dB Tone Control Characteristics • Bass Boost/Cut ±6 dB/0.5 dB Step at 50 Hz • Bass Turnover • [Other models] (1 kHz, 10% THD, 6 Ω) – Front L/R, Center, Surround L/R, Surround Back L/R MUTE, -80 dB to +16.
Signal to Noise Ratio (IHF) Standby Power Consumption • Mono 65 dB • HDMI Control Off, Standby Through Off, Network Standby Off 0.1 W • Stereo 64 dB • HDMI Control On, Standby Through On (No Signals), Network Standby Off 0.9 W • HDMI Control Off, Standby Through Off, Network Standby On, Bluetooth Standby Off Harmonic Distortion (IHF, 1 kHz) • Mono 0.5% – Wired 1.8 W • Stereo 0.6% – Wireless (Wi-Fi) 1.9 W – Wireless Direct 2.
Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.