Owner's Manual
Table Of Contents
- Owners Manual
- Bluetooth PIN (0000)
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Features
- Preparations
- Placing Speakers
- Connecting Speakers
- Connecting a TV / Playback Devices
- Connecting the FM / AM Antennas
- Preparing for Connecting to a Network
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Configuring the Necessary Speaker Settings
- Optimizing the Speaker Settings Automatically (YPAO)
- Connecting to a Network Wirelessly
- Setting the MusicCast
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing Back Music Stored on a Bluetooth Device
- Playing Back Music with AirPlay
- Playing Back Music Stored on a USB Storage Device
- Playing Back Music Stored on Media Servers (PCs / NAS)
- Listening to Internet Radio
- Playing Back More High-Quality Sounds with Bi-Amp Connections
- Playing Back Music in Multiple Rooms
- Useful Functions
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations
- Configuring Various Functions (Setup Menu)
- Configuring the System Settings (Advanced Setup Menu)
- Advanced Setup Menu Items
- Changing the Speaker Impedance Setting (SP IMP.)
- Selecting the Remote Control ID (REMOTE ID)
- Changing the FM / AM Tuning Frequency Setting (TU)
- Switching the Video Signal Type (TV FORMAT)
- Selecting the HDMI 4K Signal Format (4K MODE)
- DTS Format Notification Setting (DTS MODE)
- Restoring the Default Settings (INIT)
- Updating the Firmware (UPDATE)
- Checking the Firmware Version (VERSION)
- Updating the Unit’s Firmware Via the Network
- Frequently Asked Questions
- Troubleshooting
- Error Indications On the Front Display
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Information on HDMI
- Specs
- Quick Start Guide
- Spotify
- MusicCast
- Scan of CD-ROM
- Warranty
Troubleshooting
Refer to the table below when the unit does not function properly.
If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
First, check the following:
1
The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
2
The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on.
3
The connectors of each cable are securely inserted in to jacks on each device.
Power, system and remote control
Problem Cause Remedy
The power does not turn on.
The protection circuitry has been activated three times
consecutively. If the unit is in this condition, the standby indicator
on the unit blinks when you try to turn on the power.
As a safety precaution, capability to turn on the power is disabled. Contact your
nearest Yamaha dealer or service center to request repair.
The power does not turn off.
The internal microcomputer has frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down z (power) on the front panel for more than 15 seconds to reboot the
unit. (If the problem persists, disconnect the power cable from the AC wall outlet
and plug it again.)
The power turns off (standby mode) immediately.
The unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (
p.23).
The unit enters standby mode automatically.
The sleep timer worked. Turn on the unit and start playback again.
The auto-standby function activated because the unit was not used
for the specified time.
To disable the auto-standby function, set “Auto Power Standby” in the “Setup”
menu to “Off
” (p.95).
The speaker impedance setting is incorrect. Set the speaker impedance to match your speakers (p.104).
The protection circuitry has been activated because of a short
circuit.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.
23).
The unit is not reacting.
The internal microcomputer is frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down z (power) on the front panel for more than 15 seconds to reboot the
unit. (If the problem persists, disconnect the power cable from the AC wall outlet
and plug it again.)
En
111