Owner's Manual
Table Of Contents
- Owners Manual
- Bluetooth PIN (0000)
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Features
- Preparations
- Placing Speakers
- Connecting Speakers
- Connecting a TV / Playback Devices
- Connecting the FM / AM Antennas
- Preparing for Connecting to a Network
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Configuring the Necessary Speaker Settings
- Optimizing the Speaker Settings Automatically (YPAO)
- Connecting to a Network Wirelessly
- Setting the MusicCast
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing Back Music Stored on a Bluetooth Device
- Playing Back Music with AirPlay
- Playing Back Music Stored on a USB Storage Device
- Playing Back Music Stored on Media Servers (PCs / NAS)
- Listening to Internet Radio
- Playing Back More High-Quality Sounds with Bi-Amp Connections
- Playing Back Music in Multiple Rooms
- Useful Functions
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations
- Configuring Various Functions (Setup Menu)
- Configuring the System Settings (Advanced Setup Menu)
- Advanced Setup Menu Items
- Changing the Speaker Impedance Setting (SP IMP.)
- Selecting the Remote Control ID (REMOTE ID)
- Changing the FM / AM Tuning Frequency Setting (TU)
- Switching the Video Signal Type (TV FORMAT)
- Selecting the HDMI 4K Signal Format (4K MODE)
- DTS Format Notification Setting (DTS MODE)
- Restoring the Default Settings (INIT)
- Updating the Firmware (UPDATE)
- Checking the Firmware Version (VERSION)
- Updating the Unit’s Firmware Via the Network
- Frequently Asked Questions
- Troubleshooting
- Error Indications On the Front Display
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Information on HDMI
- Specs
- Quick Start Guide
- Spotify
- MusicCast
- Scan of CD-ROM
- Warranty
5
To start the measurement, use the cursor keys to select “Start”
and press ENTER.
The measurement will start in 10 seconds. Press ENTER to start the
measurement immediately.
Note
To stop the measurement temporarily, press RETURN and follow the procedure in “Error
messages”
(p.36).
The following screen appears on the TV when the measurement finishes.
1
2
3
4
1
The number of speakers (front side/rear side/subwoofer)
2
Speaker distance (nearest/farthest)
3
Adjustment range of speaker output level
4
Warning message (if available)
Note
▪ If any error message (such as E-1) or warning message (such as W-1) appears, see “Error
messages”
(p.36)
or “Warning messages” (p.37).
▪ A speaker with a problem is indicated by blinking of the speaker indicators in the front display.
▪ If multiple warnings are given (when operating with the front display), use the cursor keys (q/w)
to check the other warning messages.
6
Confirm the results displayed on the screen and press ENTER.
7
Use the cursor keys (e/r) to select “SAVE” and press ENTER.
The adjusted speaker settings are applied.
Note
To finish the measurement without saving the result, select “CANCEL”.
8
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Notice
▪ The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be
exposed to direct sunlight or high temperatures (such as on top of AV equipment).
En
35