Owner's Manual
Table Of Contents
- Owners Manual
- Bluetooth PIN (0000)
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Features
- Preparations
- Placing Speakers
- Connecting Speakers
- Connecting a TV / Playback Devices
- Connecting the FM / AM Antennas
- Preparing for Connecting to a Network
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Configuring the Necessary Speaker Settings
- Optimizing the Speaker Settings Automatically (YPAO)
- Connecting to a Network Wirelessly
- Setting the MusicCast
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing Back Music Stored on a Bluetooth Device
- Playing Back Music with AirPlay
- Playing Back Music Stored on a USB Storage Device
- Playing Back Music Stored on Media Servers (PCs / NAS)
- Listening to Internet Radio
- Playing Back More High-Quality Sounds with Bi-Amp Connections
- Playing Back Music in Multiple Rooms
- Useful Functions
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations
- Configuring Various Functions (Setup Menu)
- Configuring the System Settings (Advanced Setup Menu)
- Advanced Setup Menu Items
- Changing the Speaker Impedance Setting (SP IMP.)
- Selecting the Remote Control ID (REMOTE ID)
- Changing the FM / AM Tuning Frequency Setting (TU)
- Switching the Video Signal Type (TV FORMAT)
- Selecting the HDMI 4K Signal Format (4K MODE)
- DTS Format Notification Setting (DTS MODE)
- Restoring the Default Settings (INIT)
- Updating the Firmware (UPDATE)
- Checking the Firmware Version (VERSION)
- Updating the Unit’s Firmware Via the Network
- Frequently Asked Questions
- Troubleshooting
- Error Indications On the Front Display
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Information on HDMI
- Specs
- Quick Start Guide
- Spotify
- MusicCast
- Scan of CD-ROM
- Warranty
n
Using other connection methods
If your wireless router (access point) does not support WPS button configuration
method, follow the procedure below to configure the wireless network settings.
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
Note
Operations with TV screen are available only when your TV is connected to the unit via HDMI.
3
Press SETUP.
4
Use the cursor keys (q/w) to select “Network” and press ENTER.
5
Use the cursor keys (q/w) to select “Network Connection” and
press ENTER.
6
Use the cursor keys (e/r) to select “Wireless(Wi-Fi)” and press
ENTER.
Note
The unit may connect automatically to the access point to which it has connected previously. In this
case, the message indicating the successful connection will appear. You can ignore this message
and proceed to the next step.
7
Use the cursor keys (q/w) to select the desired connection
method and press ENTER.
The following connection methods are available.
WPS Button
You can set up a wireless connection with the WPS button while
viewing the TV screen. Follow the instructions displayed on the TV
screen.
WAC(iOS)
See “Sharing the iOS device setting” (p.39).
Access Point Scan
You can set up a wireless connection by searching for an access
point. For details on settings, see “Searching for an access
point” (p.42).
Manual Setting
You can setup a wireless connection by entering the required
information (such as SSID) manually. For details on settings, see
“Setting up the wireless connection manually”
(p.
43).
PIN Code
You can set up a wireless connection by entering the unit’s PIN
code into the wireless router (access point). The method is available
if the wireless router (access point) supports the WPS PIN code
method. For details on settings, see “Using the WPS PIN
code” (p.44).
En
41