Owner's Manual
Table Of Contents
- Owners Manual
- Bluetooth PIN (0000)
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Features
- Preparations
- Placing Speakers
- Connecting Speakers
- Connecting a TV / Playback Devices
- Connecting the FM / AM Antennas
- Preparing for Connecting to a Network
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Configuring the Necessary Speaker Settings
- Optimizing the Speaker Settings Automatically (YPAO)
- Connecting to a Network Wirelessly
- Setting the MusicCast
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing Back Music Stored on a Bluetooth Device
- Playing Back Music with AirPlay
- Playing Back Music Stored on a USB Storage Device
- Playing Back Music Stored on Media Servers (PCs / NAS)
- Listening to Internet Radio
- Playing Back More High-Quality Sounds with Bi-Amp Connections
- Playing Back Music in Multiple Rooms
- Useful Functions
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations
- Configuring Various Functions (Setup Menu)
- Configuring the System Settings (Advanced Setup Menu)
- Advanced Setup Menu Items
- Changing the Speaker Impedance Setting (SP IMP.)
- Selecting the Remote Control ID (REMOTE ID)
- Changing the FM / AM Tuning Frequency Setting (TU)
- Switching the Video Signal Type (TV FORMAT)
- Selecting the HDMI 4K Signal Format (4K MODE)
- DTS Format Notification Setting (DTS MODE)
- Restoring the Default Settings (INIT)
- Updating the Firmware (UPDATE)
- Checking the Firmware Version (VERSION)
- Updating the Unit’s Firmware Via the Network
- Frequently Asked Questions
- Troubleshooting
- Error Indications On the Front Display
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Information on HDMI
- Specs
- Quick Start Guide
- Spotify
- MusicCast
- Scan of CD-ROM
- Warranty
Listening to FM/AM radio
You can tune into a radio station by specifying its frequency or selecting from
registered radio stations.
Note
▪ The radio frequencies differ depending on the country or region where the unit is being used. The
explanation of this section uses a display with frequencies used in U.K. and Europe models.
▪ If you cannot obtain good reception on the radio, adjust the direction of the FM/AM antennas.
Setting the frequency steps
(Asia, Taiwan, Brazil and General models only)
At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM.
Depending on your country or region, set the frequency steps to 100 kHz for FM and
10 kHz for AM.
1
Set the unit to standby mode.
2
When holding down STRAIGHT on the front panel, press z
(power).
(power)
z
STRAIGHTPROGRAM
3
Press PROGRAM repeatedly to select “TU”.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIR TUAL
TU••••FM50/AM9
4
Press STRAIGHT to select “FM100/AM10”.
5
Press z (power) to set the unit to standby mode and turn it on
again.
Selecting a frequency for reception
1
Press FM/AM to select a band.
“TUNER” is selected as the input source and then the frequency currently
selected is displayed.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
MUT E VIR TUAL
VOL .
FM 87.50MHz
En
55