Owner's Manual
Table Of Contents
- English
- Français
- INTRODUCTION
- PRÉPARATIONS
- OPÉRATIONS DE BASE
- CORRECTIONS DE CHAMP SONORE
- OPÉRATIONS DÉTAILLÉES
- INFORMATIONS COMPLÉMENTAIRIES
- Deutsch
- EINLEITUNG
- VORBEREITUNG
- GRUNDLEGENDE BEDIENUNGSVORGÄNGE
- SOUNDFELDPROGRAMME
- WEITERFÜHRENDE BEDIENUNGSVORGÄNGE
- ZUSÄTZLICHE INFORMATIONEN
- Svenska
- Nederlands
- Русский
- ВВЕДЕНИЕ
- ПОДГОТОВКА
- ОСНОВНОЕ УПРАВЛЕНИЕ
- ПРОГРАММЫ ЗВУКОВОГО ПОЛЯ
- ДОПОЛНИТЕЛЬНЫЕ ОПЕРАЦИИ
- ДОПОЛНИТЕЛЬНАЯ ИНФОРМАЦИЯ
- LIST OF REMOTE CONTROL CODES
![](/manual/yamaha/rx-v657/owner-s-manual-english-french-german-swedish-dutch-russian/images/img-81.png)
79
SOUND FIELD PARAMETER DESCRIPTIONS
ADDITIONAL
INFORMATION
English
■ DIALG.LIFT (Dialog lift)
Function: Adjusts the height of the front and center channel sounds by assigning some of the front and center
channel elements to the presence speakers.
Description: The larger the parameter, the higher the position of the front and center channel sound.
Choices: 0/1/2/3/4/5, initial setting is 0.
For 2ch Stereo:
■ DIRECT (Direct)
Function: Bypasses this unit’s decoders and DSP processors for pure high fidelity sound when playing 2-channel
analog sources. The AUTO setting is effective only when BASS and TREBLE are set to 0 dB.
Choices: AUTO, OFF
• When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2 channels and output from the front left and
right speakers.
• When “BASS OUT” is set to BOTH, or “FRONT SP” set to SMALL and “BASS OUT” set to SWFR, front left and right speaker low-
frequency signals are redirected to the subwoofer.
For 7ch Stereo:
Function: These parameters adjust the volume level for each channel in 7-channel stereo mode.
Control Range: 0 – 100%
■ CT LEVEL (Center level)
■ SL LEVEL (Surround left level)
■ SR LEVEL (Surround right level)
■ SB LEVEL (Surround back level)
■ PL LEVEL (Presence left level)
■ PR LEVEL (Presence right level)
For PRO LOGIC IIx Music and PRO LOGIC II Music:
■ PANORAMA (Panorama)
Function: Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect.
Choices: OFF, ON
■ DIMENSION (Dimension)
Function: Gradually adjusts the sound field either towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).
■ CENTER WIDTH (Center width)
Function: Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the
center image towards the front left and right speakers.
Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only
from front left and right speakers)
Initial setting: 3
This parameter can be set only when SUR. STANDARD is selected.
Notes
Note