Owner's Manual

Connecting video/audio recording devices
You can connect video/audio recording devices to the AV OUT and AUDIO OUT jacks.
These jacks output analog video/audio signals selected as the input.
• To copy video/audio from a video device, connect the video device to the AV5~6 jacks or V-AUX (VIDEO/
AUDIO) jacks of this unit.
• To copy audio from an audio device, connect the audio device to the AVS~6 jacks, AUDIO1 ~2 jacks or V-
AUX (AUDIO) jacks of this unit.
AV OUT jacks
Video/audio input
Connecting a device compatible
with SCENE link playback (remote connection)
If you have a Yamaha product that has the capability of the SCENE control signal
transmission, you can control the Yamaha product in conjunction with a scene selection
(p.39) by connecting it to the REMOTE OUT jack with a monaural mini-jack cable.
This unit REMOTE OUT jack
(rear)
Remote input
Yamaha product
(DVD player, etc.)
U
AUDIO OUT jacks Audio input
• If you connect a Yamaha product compatible with SCENE link playback to the REMOTE OUT jack, you can
start playback on the Yamaha product in conjunction with a scene selection (p.39). To enable the SCENE
link playback, specify the device type in "Device Control" (p.83) in the "Scene" menu.
• You also connect an infrared signal receiver/emitter to operate devices in the main zone from Zone2 (p.70).
En 31