Owner's Manual

ON SCREEN
keys
ENTER
The SCENE function allows you to select the assigned input source,
sound program and Compressed Music Enhancer on/off at once.
Press SCENE.
The input source and settings registered to the
corresponding scene are selected. This unit turns on
automatically when it is in standby mode.
By default, the following settings are registered for each scene.
BD/DVD HDMI1 MOVIE (Drama) Off
TV AV4 STRAIGHT On
CD AV3 STRAIGHT Off
MUSIC
RADIO TUNER On
(7ch Stereo)
[_ On-screen scene selection
,1, Press ON SCREEN.
,2, Use the cursor keys to select "Scene" and press ENTER.
,3, Use the cursor keys to select a desired scene and press
ENTER.
Configuring scene assignments
2
Perform the following operations to prepare the
settings you want to assign to a scene.
- Select an input source (p.38)
- Select a sound program (p.40)
- Enable/disable Compressed Music Enhancer (p.44)
Hold down the desired SCENE key until "SET
Complete" appears on the front display.
3
If you want to control the corresponding playback
device after selecting the scene, hold down the
corresponding SCENE key and input selection key
together for more than 3 seconds.
Once the setting is completed successfully, SOURCE/
RECEIVER blinks twice.
• If you have not registered the remote control code of the playback device
yet, see "Setting the remote control codes for playback devices" (p.105) to
register it.
• You can also configure scene assignments in the "Scene" menu (p.82).
• You can start playback of external devices connected to this unit via HDMI
or a Yamaha product connected to the REMOTE OUT jack, in conjunction
with a scene selection (SCENE link playback). To enable the SCENE link
playback, specify the device type in "Device Control" (p.83) in the "Scene"
menu.
En 39