Owner's Manual

TUNER
AM
MEMORY
PRESET
TUN./CH
MODE
You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
• If you cannot have a good reception on the radio, adjust the direction of the FM/
AM antennas.
Selecting a frequency for reception
Press TUNER to select "TUNER" as the input
source.
Press FM or AM to select a band.
3
Use the following keys to set a frequency.
TUN./CH: Increase/decrease the frequency.
Hold clown the key for about a second to search the station
automatically.
Numeric keys: Enter a frequency directly. For example, to
select 98.5 MHz, press "9", "8" and "5".
Registering favorite radio stations (preset)
You can register up to 40 radio stations as presets. Once you
registered stations, you can easily tune into those stations by
selecting the preset number.
• You can automatically register FM radio stations with strong signals using "Auto
Preset" (p.47).
Registering a radio station
Select a radio station manually and register it to a preset number.
2
Follow "Selecting a frequency for reception" (p.45)
to tune into a desired radio station.
Hold down MEMORY for more than 2 seconds.
The radio station will be registered to the preset number
"01" for the first time. After that, it will be registered to an
empty preset number (next to the lastly-registered preset
number).
"TUNED" lights up when a signal is received from a radio
station.
"STEREO" also lights up when a stereo signal is received.
• "Wrong Station!" appears when you enter a frequency that is out of
receivable range
• You can switch between stereo and monaural for FM radio reception by
pressing MODE. When signal reception for FM radio station is unstable,
switching to monaural may improve it.
Preset number
• To select a preset number to which the station will be registered, press
MEMORY once after tuning into a desired radio station, use PRESET or
numeric keys to select a preset number, and then press MEMORY again.
"Empty" (not in use) or frequency currently registered
En 45