Owner's Manual

MAIN/ZONE2
AV5~6
AUDIO
DOCK
TUNER
SIRIUS
NET
USB
SLEEP
Remote connections between Yamaha products
If you are using Yamaha products that support remote connections
like this unit, an infrared signal transmitter is unnecessary. You can
transmit remote control signals by connecting the REMOTE IN/OUT
jacks with monaural mini-jack cables and an infrared signal
receiver.
REMOTE IN/OUT jacks REMOTE IN/OUT jacks
Yamaha products
(up to 6, including this unit)
:;iii ¸ Remotecontro,
Zone2
Controlling Zone2
2
3
Set MAIN/ZONE2 to "ZONE2".
Press RECEIVER _)
Each time you press the key, Zone2 output is enabled or
disabled.
When Zone2 output is enabled, "ZONE2" lights up in the
front display.
Use the following keys to select an input source.
V-AUX: VIDEO AUX (AUDIO) jacks (on the front panel)
AVS~6:AV5-6 (AUDIO) jacks
AUDIO: AUDIO1-2 jacks (press repeatedly to select a
desired network source)
DOCK: DOCK jack
TUNER: FM/AM radio
SIRIUS: SIRIUS jack
4
NET: NETWORK jack (press repeatedly to select a desired
network source)
USB: USB jack (on the front panel)
• You cannot select USB and network sources exclusively for each zone. For
example, if you select "PC" for Zone2 when "USB" is selected for the main
zone, the input source for the main zone also switches to "PC".
Start playback on the external device, or select a
radio station.
Refer to the instruction manual of the external device.
For details on the following operations, see the
corresponding pages.
- Listening to FM/AM radio (p.45)
- Listening to SIRIUS Satellite Radio TM (p.48)
- Playing back iPod music (p.54)
- Playing back music via Bluetooth (p.59)
- Playing back music stored on a USB storage device (p.61)
- Playing back music stored on PCs (p.64)
- Listening to Internet radio (p.67)
• The on-screen operations are not available for Zone2. Use the front display
or web control (p.73) to control Zone2.
• To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP
repeatedly. The Zone2 output will be disabled after a specified period of
time.
• To adjust the Zone2 volume, press VOLUME or MUTE (available only when
using the internal amplifier of this unit).
Ca_tior'_
• To avoid unexpected noise, never play back DTS-CDs in Zone2.
En 71