Owner's Manual

Front panel
MAIN ZONE
Turns on/off (standby) this unit.
For connecting the supplied YPAO microphone (p.33).
ZONE2
Enables/disables the audio output to Zone2 (p.71).
Remote control sensor
Receives remote control signals (p.5).
ZONE CONTROL
Switches the zones (main or Zone2) to operate with the front
panel controllers (p.71).
INFO
Selects the information displayed on the front display (p.75).
@ MEMORY
Registers FM/AM radio stations as preset stations (p.45).
Registers SIRIUS Satellite Radio channels as preset
channels (p.50).
Registers USB/network contents as shortcuts (p.72).
PRESET
Selects a preset FM/AM radio station (p.46).
Selects a preset SIRIUS Satellite Radio channel (p.50).
Selects a USB/network content from shortcuts (p.72).
FM/AM (CATEGORY)
Switches between FM and AM (p.45).
Selects a channel category for SIRIUS Satellite Radio (p.49).
Front display
Displays information (p.9).
@ TUNING/CH
Selects an FM/AM radio frequency (p.45) or a SIRIUS
Satellite Radio channel (p.49).
PURE DIRECT
Enables/disables Pure Direct (p.44).
PHONES jack
For connecting headphones.
USB jack
For connecting a USB storage device (p.61) or an iPod via
USB (p.54).
@ INPUT
Selects an input source.
Q TONE CONTROL
Adjusts the high-frequency range and low-frequency range
of sounds output from speakers and headphones (p.77).
_SCENE
Selects the registered input source and sound program at
once. Additionally, you can turn on this unit when it is in
standby mode (p.39).
PROGRAM
Selects a sound program or a surround decoder (p.40).
STRAIGHT
Enables/disables the straight decode mode (p.43).
For connecting camcorders, game consoles, etc (p.29). To
protect against dust, attach the supplied VIDEO AUX input
cover when not in use.
@ VOLUME
Adjusts the volume.
En 8