Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual (Supplied on CD-ROM)
- Video Signal Flow
- HDMI Information
- Optimizing the Speaker Settings Automatically (YPAO)
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Features
- Setup
- Playback
- Basic Playback Procedure
- Changing Input Settings with a Single Key (SCENE Function)
- Selecting the Sound Mode
- Listening to FM / AM
- Listening to SIRIUS Satellite Radio
- Playing Back Songs with iPod
- Playing Back Songs with Bluetooth Devices
- Playing Back Songs with USB Devices
- Playing Back Music Stored on a PC
- Internet Radio
- Playing Back Music in Multiple Rooms
- Useful Functions
- Configuring Settings Specific to an Individual Input Source (Option Menu)
- Configurations
- Programming the Remote Control
- Updating the Firmware
- FAQs
- Troubleshooting
- Messages
- Ideal Speaker Layout
- Glossary
- Video Signal Flow
- HDMI Information
- Specs
- Supplement Manuals Supplied on CD-ROM
- Scan of CD-ROM
- Warranty
En 13
Select the speaker layout depending on the number of speakers and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
• For information on the ideal speaker layout, see “Ideal speaker layout” (p.116).
• If you have 7 speakers, use two of them as surround back speakers or presence speakers. To reinforce the rear right/left sound field, use them as surround back speakers.
To create a natural stereoscopic sound field, use them as presence speakers.
1 Placing speakers
Caution
• This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm speakers, set the speaker impedance of this unit to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers. For
details, see “Setting the speaker impedance” (p.16).
Speaker type Abbr. Function
Speaker system (the number of channels)
7.1+2 7.1 7.1 6.1 5.1 4.1 3.1 2.1
Front (L)
Produce front right/left channel sounds (stereo sounds).
● ●●●●●●●
Front (R) ● ●●●●●●●
Center Produces center channel sounds (dialogs, vocals, etc). ●●●●● ●
Surround (L)
Produce surround right/left channel sounds. Surround speakers also produce surround back channel sounds when
no surround back speakers are connected.
● ●●●●●
Surround (R) ● ●●●●●
Surround back (L)
Produce surround back right/left channel sounds.
●●
Surround back (R) ●●
Surround back Produces mixed-down surround back right/left channel sounds. ●
Presence (L)
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.43), the presence speakers create a
natural stereoscopic sound field in your room.
●●
Presence (R) ●●
Subwoofer
Produces LFE (low-frequency effect) channel sounds and reinforces bass parts of other channels.
This channel is counted as “0.1”.
● ●●●●●●●
1
Speaker placement
2 3 4 5 6 7 8 9