Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual (Supplied on CD-ROM)
- Initializing Settings (Advanced Setup Menu)
- Video Signal Flow
- HDMI Information
- Features
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Setup
- Speaker Layout
- Setting Speaker Impedance
- Connecting Speakers
- Bi-Amp Speaker Connection
- Jacks & Cable Types
- Connecting a TV
- Connecting Playback Devices
- Connecting the FM / AM Antennas
- Connecting to a Network
- Connecting Recording Devices
- SCENE Link Remote Connection
- Trigger Out Connections
- Connections for Multi-Zone Operation
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Optimizing the Speaker Settings Automatically (YPAO)
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- iPod
- USB Devices
- Playing Back Music Stored on Media Servers
- Listening to Internet Radio
- Playing Back iTunes / iPod Music via a Network (AirPlay)
- Multi-Zone Operation
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations (Using the Menus)
- Option Menu - Configuring Playback Settings for Different Playback Sources
- Input Menu - Configuring Input Sources
- Scene Menu - Configuring the Scene Function
- Sound Program Menu - Configuring Sound Programs / Surround Decoders
- Setup Menu
- Information Menu
- Advanced Setup Menu
- Programming the Remote Control
- Updating the Unit’s Firmware
- Video Signal Flow
- HDMI Information
- Troubleshooting
- FAQs
- Error Messages
- Glossary
- Specs
- Index
- Controlling the Unit from a Web Browser
- Quick Guide for Useful Functions
- List of Remote Control Codes
- Scan of CD-ROM
- Safety
- Warranty
CONFIGURATIONS ➤ Controlling external devices with the remote control En 108
You can use the unit’s remote control to operate external devices
(such as BD/DVD players) if you have registered the remote control
code of the external device.
• You cannot control an external device that does not have a remote control sensor.
• Ensure that the remote control ID of the external device is set to “ID1”. If any other
ID is selected, the remote control operations may not work properly.
• If the unit’s remote control is without batteries for more than 2 minutes, the
registered codes may be cleared. If this happens, insert new batteries and register
the codes again.
• Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all
the input selection keys. With this setting, you can control HDMI
Control-compatible devices connected to the unit with the remote control. (This
function may not work depending on the specification of the external device.)
Registering the remote control code for a TV
You can use the unit’s remote control to operate a TV if you have
registered its remote control code.
• You can also register your TV’s remote control code to the unit’s input selection
keys (p.109). This would allow you to use the cursor keys or numeric keys to
operate the TV (this function may not be available on some TV models).
• (RX-V773 [China, Korea, U.K. and Europe models] only)
You can also assign a function to each key using the learning function (p.110).
1
Use “Remote Control Code Search” in the CD-ROM
to find your TV’s remote control code.
• If there are multiple remote control codes, register the first code in the list.
If that does not work, try the other codes.
2
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
3
Press TV z.
4
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is successfully registered, SOURCE
blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
■ TV operations
Once you have registered the remote control code for your TV, you
can control it using the TV operation keys, regardless of the input
source selected on the unit.
Controlling external devices with the remote control
TV operation keys
INPUT Switches the video inputs of the TV.
MUTE Mutes the audio output of the TV.
TV VOL Adjust the volume of the TV.
TV CH Switch the channels of the TV
TV z Turns on/off the TV.
TV VOL TV CH
TV
INPUT
MUTE
CODE SET
90
10
ENT
MEMORY
5
687
1234
MOVIE
ENHANCER
TUNING PRESET
BAND
DISPLAYRETURN
ENTER
ON
SCREEN
OPTION
TOP MENU
MUTE
PROGRAM VOLUME
POP-UP/MENU
PURE DIRECT
STRAIGHT
INFO SLEEP
MUSIC
NET
PARTY HDMI OUT
TUNER
MAIN
ZONE 2
USB
MODE
SCENE
BD
DVD
TV
NET
RADIO
SOURCE
RECEIVER
HDMI
AV
AUDIO
5
65
V-AUX
1234
12
12
34
SUR. DECODE
MO
VI
E
E
NHANCER
T
U
NIN
G
PRE
S
E
T
BAN
D
DI
S
PLA
Y
RETURN
ENTE
R
O
N
S
CRE
E
N
O
PTI
O
N
T
OP MENU
M
UTE
P
R
OG
RA
M
V
O
L
U
M
E
P
O
P-UP
/
ME
N
U
PURE DIRECT
S
TRAI
G
H
T
INF
O
S
LEE
P
MUSI
C
NE
T
PARTY
H
DMI OU
T
TUN
E
R
MAIN
ZO
NE
2
U
SB
M
O
DE
SC
EN
E
BD
DV
D
TV
NET
RADI
O
R
E
C
EIVE
R
HDMI
AV
A
U
DI
O
5
6
5
V
-A
U
X
1
2
3
4
1
2
1
2
3
4
SU
R. DE
CO
D
E
CODE SET
TV z
SOURCE
Numeric keys
TV operation keys