Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual (Supplied on CD-ROM)
- Initializing Settings (Advanced Setup Menu)
- Video Signal Flow
- HDMI Information
- Features
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Setup
- Speaker Layout
- Setting Speaker Impedance
- Connecting Speakers
- Bi-Amp Speaker Connection
- Jacks & Cable Types
- Connecting a TV
- Connecting Playback Devices
- Connecting the FM / AM Antennas
- Connecting to a Network
- Connecting Recording Devices
- SCENE Link Remote Connection
- Trigger Out Connections
- Connections for Multi-Zone Operation
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Optimizing the Speaker Settings Automatically (YPAO)
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- iPod
- USB Devices
- Playing Back Music Stored on Media Servers
- Listening to Internet Radio
- Playing Back iTunes / iPod Music via a Network (AirPlay)
- Multi-Zone Operation
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations (Using the Menus)
- Option Menu - Configuring Playback Settings for Different Playback Sources
- Input Menu - Configuring Input Sources
- Scene Menu - Configuring the Scene Function
- Sound Program Menu - Configuring Sound Programs / Surround Decoders
- Setup Menu
- Information Menu
- Advanced Setup Menu
- Programming the Remote Control
- Updating the Unit’s Firmware
- Video Signal Flow
- HDMI Information
- Troubleshooting
- FAQs
- Error Messages
- Glossary
- Specs
- Index
- Controlling the Unit from a Web Browser
- Quick Guide for Useful Functions
- List of Remote Control Codes
- Scan of CD-ROM
- Safety
- Warranty
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO) En 44
Warning messages
If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.
Warning message Cause Remedy
W-1: Out of Phase
A speaker cable may be connected with the reverse polarity
(+/-).
Select “Wiring” in “Result” (p.41) and check the cable connections (+/-) of the speaker identified by
“Reverse”. If the speaker is connected incorrectly, turn off the unit and then reconnect the speaker cable.
Depending on the type of speakers or room environment, this message may appear even if the speakers are
connected correctly.
W-2: Over Distance
A speaker is placed more than 24 m (80 ft) from the listening
position.
Select “Distance” in “Result” (p.41) and move the speaker identified by “>24.0m (>80.0ft)” within 24 m (80 ft)
of the listening position.
W-3: Level Error
There are significant volume differences between the
speakers.
Check the usage environment and cable connections (+/-) of each speaker, and the volume of the
subwoofer. We recommend using the same speakers or speakers with specifications that are as similar as
possible.
1 2 3 4 5 6 7 8 9 10
Automatic speaker setup