Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual (Supplied on CD-ROM)
- Video Signal Flow / Conversion
- HDMI Information
- Features
- Optimizing the Speaker Settings Automatically (YPAO)
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Preparations
- Speaker Layout
- Setting Speaker Impedance
- Connecting Speakers
- Jacks & Cable Types
- Connecting a TV
- Connecting Playback Devices
- Front Panel Connections
- Connecting the FM / AM Antennas
- Connecting to a Network
- Connecting an External Power Amplifier
- Connecting Recording Devices
- Connecting a Device Compatible with the Trigger Function
- Multi-Zone Connections
- Power Cable
- Selecting an On-Screen Menu Language
- Optimizing the Speaker Settings Automatically (YPAO)
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- iPod
- USB Devices
- Playing Back Music Stored on Media Servers (PC / NAS)
- Listening to Internet Radio
- Playing Back iTunes / iPod Music via a Network (AirPlay)
- Playing Back Music in Multiple Rooms
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Programming the Remote Control
- Configurations
- Updating the Unit’s Firmware
- Updating the Unit’s Firmware via the Network
- Video Signal Flow / Conversion
- HDMI Information
- Troubleshooting
- Error Messages
- FAQs
- Glossary
- Specs
- Index
- List of Remote Control Codes (Supplied on CD-ROM)
- Using the Pandora Service (Supplied on CD-ROM)
- Multi-Zone and Remote Control Functions
- Supplement for Web Control
- Using the Rhapsody Service
- Supplement for SiriusXM Internet Radio (Firmware Required for this Feature)
- Software Information
- Scan of CD-ROM
- Warranty
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 95
■ Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
■ Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
■ Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level when the volume
is adjusted.
Settings
Video
Configures the video output settings.
■ Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
Settings
• When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to
reduce video output delay.
• When “Video Mode” is set to “Processing” and the resolution is being converted, short messages are not
displayed on the TV screen.
❑ Resolution
Selects a resolution to output HDMI video signals when “Video Mode” is set to
“Processing”.
Settings
• If you need to select a resolution that is not supported by your TV, set “MON.CHK” (p.106) in the
“ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on
your TV normally.)
Off (default)
Sets the level to the volume level of the unit when it last entered
standby mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max
Volume”.)
Off Does not adjust the effect level automatically.
On (default) Adjusts the effect level automatically.
Direct (default) Disables the video signal processing.
Processing
Enables the video signal processing.
Select a resolution and an aspect ratio in “Resolution” and “Aspect”.
Through Does not convert the resolution.
Auto (default) Selects a resolution automatically in accordance with TV resolution.
480p/576p, 720p,
1080i, 1080p, 4K
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)