Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual (Supplied on CD-ROM)
- Video Signal Flow / Conversion
- HDMI Information
- Features
- Optimizing the Speaker Settings Automatically (YPAO)
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Preparations
- Speaker Layout
- Setting Speaker Impedance
- Connecting Speakers
- Jacks & Cable Types
- Connecting a TV
- Connecting Playback Devices
- Front Panel Connections
- Connecting the FM / AM Antennas
- Connecting to a Network
- Connecting an External Power Amplifier
- Connecting Recording Devices
- Connecting a Device Compatible with the Trigger Function
- Multi-Zone Connections
- Power Cable
- Selecting an On-Screen Menu Language
- Optimizing the Speaker Settings Automatically (YPAO)
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- iPod
- USB Devices
- Playing Back Music Stored on Media Servers (PC / NAS)
- Listening to Internet Radio
- Playing Back iTunes / iPod Music via a Network (AirPlay)
- Playing Back Music in Multiple Rooms
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Programming the Remote Control
- Configurations
- Updating the Unit’s Firmware
- Updating the Unit’s Firmware via the Network
- Video Signal Flow / Conversion
- HDMI Information
- Troubleshooting
- Error Messages
- FAQs
- Glossary
- Specs
- Index
- List of Remote Control Codes (Supplied on CD-ROM)
- Using the Pandora Service (Supplied on CD-ROM)
- Multi-Zone and Remote Control Functions
- Supplement for Web Control
- Using the Rhapsody Service
- Supplement for SiriusXM Internet Radio (Firmware Required for this Feature)
- Software Information
- Scan of CD-ROM
- Warranty
APPENDIX ➤ Troubleshooting En 118
Video
No sound from the TV (when HDMI Control is
used).
The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
A TV that does not support ARC is connected to the unit only with
an HDMI cable.
Use a digital optical cable to make an audio connection (p.25).
(If the TV is connected to the unit with an audio cable)
The TV audio input setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
(p.96).
(If you are trying to use ARC)
ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On” (p.97). Also, enable ARC on the TV.
Only the front speakers work on multichannel
audio.
The playback device is set to output 2-channel audio (such as
PCM) only.
To check it, use “Audio Signal” in the “Information” menu (p.104). If necessary,
change the digital audio output setting on the playback device.
Noise/hum is heard.
The unit is too close to another digital or radio frequency device. Move the unit further away from the device.
The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
The sound is distorted.
The volume of the unit is too high. Turn down the volume. If “ECO Mode” is set to “On”, set it to “Off” (p.102).
A device connected to the unit’s output jacks is not turned on. Turn on all devices connected to the unit’s output jacks.
Problem Cause Remedy
Problem Cause Remedy
No video.
Another input source is selected on the unit. Select an appropriate input source with the input selection keys.
Another input source is selected on the TV. Switch the TV input to display the video from the unit.
The video signal output from the unit is not supported by the TV. Set “MON.CHK” in the “ADVANCED SETUP” menu to “YES” (p.106).
The cable connecting the unit and TV (or playback device) is
defective.
If there is no problem with the connection, replace with another cable.
No video from the playback device (connected to
the unit with HDMI).
The input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution), use “Video
Signal” in the “Information” menu (p.104). For information about video signals
supported by the unit, see “HDMI signal compatibility” (p.128).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The number of devices connected to the HDMI OUT jack is over
the limit.
Disconnect some of the HDMI devices.
The menu of the unit is not displayed on the TV.
The TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them (p.23 to 26).
Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack).