Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual (Supplied on CD-ROM)
- Video Signal Flow / Conversion
- HDMI Information
- Features
- Optimizing the Speaker Settings Automatically (YPAO)
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Preparations
- Speaker Layout
- Setting Speaker Impedance
- Connecting Speakers
- Jacks & Cable Types
- Connecting a TV
- Connecting Playback Devices
- Front Panel Connections
- Connecting the FM / AM Antennas
- Connecting to a Network
- Connecting an External Power Amplifier
- Connecting Recording Devices
- Connecting a Device Compatible with the Trigger Function
- Multi-Zone Connections
- Power Cable
- Selecting an On-Screen Menu Language
- Optimizing the Speaker Settings Automatically (YPAO)
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- iPod
- USB Devices
- Playing Back Music Stored on Media Servers (PC / NAS)
- Listening to Internet Radio
- Playing Back iTunes / iPod Music via a Network (AirPlay)
- Playing Back Music in Multiple Rooms
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Programming the Remote Control
- Configurations
- Updating the Unit’s Firmware
- Updating the Unit’s Firmware via the Network
- Video Signal Flow / Conversion
- HDMI Information
- Troubleshooting
- Error Messages
- FAQs
- Glossary
- Specs
- Index
- List of Remote Control Codes (Supplied on CD-ROM)
- Using the Pandora Service (Supplied on CD-ROM)
- Multi-Zone and Remote Control Functions
- Supplement for Web Control
- Using the Rhapsody Service
- Supplement for SiriusXM Internet Radio (Firmware Required for this Feature)
- Software Information
- Scan of CD-ROM
- Warranty
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 79
■ Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments
Default
Bypass (Bypass)
• If you set an extreme value, sounds may not match those from other channels.
Adjusting with the front panel controls
a Press TONE CONTROL to select “Treble” or “Bass”.
b Press PROGRAM to make an adjustment.
■ Adaptive DRC (Adaptive DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, it is useful for listening to
playback at a low volume at night.
Settings
If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a
high volume.
■ CINEMA DSP 3D Mode (CINEMA DSP 3D)
Enables/disables CINEMA DSP 3D (p.48). If this function is set to “On”, CINEMA DSP
3D functions with the selected sound programs (except 2ch Stereo and 7ch Stereo).
Settings
■ Dialogue Adjust (Dialog Adjust)
Adjusts the volume or perceive height of dialogue sounds.
❑ Dialogue Level (Dialog Lvl)
Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly, you
can turn up its volume by increasing this setting.
Setting range
0 to 3
Default
0
❑ Dialogue Lift (Dialog Lift)
Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is coming
from below the TV screen, you can raise its perceived height by increasing this setting.
• This setting is available only when one of the following conditions is met.
– One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when presence speakers
are used.
– Virtual Presence Speaker (VPS) (p.48) is working.
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
Setting range
0 to 5 (The bigger the value the higher the position)
Default
0
On (On) Automatically adjusts the dynamic range.
Off (Off) (default) The dynamic range is not automatically adjusted.
Volume: low Volume: high
Input level Input level
On
Off
On
Off
Output level
Output level
On (On) (default) Enables CINEMA DSP 3D.
Off (Off) Disables CINEMA DSP 3D.
Ideal position