Operation Manual
Table Of Contents
- Accessories
- FEATURES
- PREPARATIONS
- General setup procedure
- Placing speakers
- Connecting speakers
- Connecting a TV
- Connecting playback devices
- Connecting the FM/AM antennas
- Connecting a network cable or preparing the wireless antenna
- Connecting other devices
- Connecting the power cable
- Selecting an on-screen menu language
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- PLAYBACK
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio
- Playing back music via Bluetooth
- Playing back iPod music
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back music with AirPlay
- Playing back music in multiple rooms (multi-zone)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- CONFIGURATIONS
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (DSP Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SP IMP.)
- Selecting the remote control ID (REMOTE ID)
- Changing the FM/AM tuning frequency setting (TU)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MON.CHK)
- Selecting the HDMI 4K signal format (4K MODE)
- Restoring the default settings (INIT)
- Updating the firmware (UPDATE)
- Checking the firmware version (VERSION)
- Updating the unit’s firmware via the network
- APPENDIX
En 102
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 36
Manual Setup
Power Amp Assign Selects a speaker system. 104
Configuration
Front Selects the size of the front speakers. 104
Center Selects whether or not a center speaker is connected and its size. 104
Surround Selects whether or not surround speakers are connected and their size. 104
Surround Back Selects whether or not surround back speakers are connected and their size. 105
Front Presence Selects whether or not presence speakers are connected. 105
Subwoofer Selects whether or not a subwoofer is connected and its phase. 105
Layout Selects a surround speaker layout when surround speakers are used. 105
Bass Cross Over Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 105
Distance Sets the distance between each speaker and listening position. 106
Level Adjusts the volume of each speaker. 106
Parametric EQ Adjusts the tone with an equalizer. 106
Test Tone Enables/disables the test tone output. 107
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 107
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 107
Adjustment Adjusts the delay between video and audio output manually. 108
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 108
Max Volume Sets the maximum volume to prevent excessive loudness. 108
Initial Volume Sets the initial volume for when this receiver is turned on. 108
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted. 108
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 108
Virtual Surround Back Speaker Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 108
Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 109
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 110
Audio Output Selects a device to output audio. 111
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 111