Owner's Manual

Table Of Contents
En 16
a REMOTE IN/OUT jacks
For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other
devices from another room (p.89).
b TRIGGER OUT jack
For connecting to a device that supports the trigger function (p.41).
c HDMI OUT jack
For connecting to an HDMI-compatible TV and outputting video/audio signals (p.33). When using ARC, TV
audio signal can also be input through the HDMI OUT jack.
d ANTENNA jacks
For connecting to FM and AM antennas (p.39).
e HDMI 1-5 jacks
For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.35).
f Wireless antenna
For connecting to a network device wirelessly (p.53).
g NETWORK jack
For connecting to a network with a network cable (p.40).
h SPEAKERS terminals
For connecting to speakers (p.19).
i VOLTAGE SELECTOR
(Taiwan, Brazil and General models only)
Selects the switch position according to your local voltage (p.42).
j Power cable
For connecting to an AC wall outlet (p.42).
k PHONO jacks
For connecting to a turntable (p.38).
l AUDIO 1-2 jacks
For connecting to audio playback devices and inputting audio signals (p.38).
m AV 1-6 jacks
For connecting to video/audio playback devices and inputting video/audio signals (p.35).
n ZONE2 OUT jacks
For connecting to the external amplifier used in Zone2 and for outputting audio (p.88).
o MONITOR OUT jacks
COMPONENT VIDEO jacks
For connecting to a TV that supports component video and outputting video signals (p.34).
VIDEO jack
For connecting to a TV that supports composite video and outputting video signals (p.34).
p SUBWOOFER PRE OUT 1-2 jacks
For connecting to a subwoofer with built-in amplifier (p.41).