Owner’s Manual

En 13

a REMOTE IN/OUT jacks

For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other

devices from another room (p.82).

b TRIGGER OUT jack

For connecting to a device that supports the trigger function (p.36).

c ANTENNA jacks

For connecting to FM and AM antennas (p.34).

d HDMI OUT jack

For connecting to an HDMI-compatible TV and outputting video/audio signals (p.29). When using ARC, TV

audio signal can also be input through the HDMI OUT jack.

e HDMI 1-5 jacks

For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.30).

f Wireless antenna

For a wireless (Wi-Fi) connection to a network (p.46) and a Bluetooth connection (p.67).

g NETWORK jack

For connecting to a network with a network cable (p.35).

h SPEAKERS terminals

For connecting to speakers (p.16).

i VOLTAGE SELECTOR

(Taiwan, Brazil and General models only)

Selects the switch position according to your local voltage (p.37).

j Power cable

For connecting to an AC wall outlet (p.37).

k AUDIO 1-5 jacks

For connecting to audio playback devices and inputting audio signals (p.33).

l PHONO jacks

For connecting to a turntable (p.33).

m AV 1-2 jacks

For connecting to video/audio playback devices and inputting video/audio signals (p.30).

n ZONE2 OUT jacks

For connecting to the external amplifier used in Zone2 and for outputting audio (p.81).

o SUBWOOFER PRE OUT jacks

For connecting to a subwoofer with built-in amplifier.